Samsung DU7192 (IPS) vs Philips PUS7000

The maximum luminance for HDR content on the Samsung DU7192 is 245 nits, but is often exceeded by even lower results. Such values are insufficient for comfortable viewing of HDR material due to the lack of appropriate image dynamics and the colour distortions caused by the device's low brightness. While the manufacturer has equipped the device with an HDR format featuring dynamic metadata, specifically HDR10+, it is rarely used compared to Dolby Vision, which Samsung has yet to introduce in its televisions. It is also worth noting that the Samsung DU7192 only covers 82% of the wide colour gamut DCI-P3, meaning that sending signals in a wide dynamic range should be avoided, as significant colour loss will be evident.

Overall, the Samsung DU7192 delivers high-quality images that will satisfy most users. The television stands out particularly for its vivid colours and decent contrast. Thanks to UHD technology, the image on the screen is sharp and clear, even during fast-moving scenes. The DU7192 also supports HDR, allowing for better reproduction of details in bright and dark areas of the image.

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is not enough to correctly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a regular SDR recording. Therefore, it's better to stick with the latter format to avoid issues in displaying bright scenes, which you can read about below. The situation is not improved by the fact that this is a classic LCD model without additional layers to enhance colors, such as QLED or PFS. As a result, colors in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

The best factory mode we used throughout the testing process was "Filmmaker." However, like most modes, it had its drawbacks. Starting with the most basic chart, the white balance, we observed a pronounced dominance of red in SDR and HDR modes. Although green also appeared in HDR mode, it did not significantly affect the overall perception. This resulted in an image with a noticeable yellow tint, particularly evident on the whites and the faces of the actors.

Another important chart, arguably more significant, is gamma, which controls contrast in materials with a standard colour palette. In factory mode it performed reasonably well, but with one notable issue regarding the darkest scenes. Here, it was significantly lowered, resulting in excessive brightening, which robbed the film of its contrast and suspense.

As for HDR content, the white balance remained similar. The main change occurred in the EOTF curve chart. Initially, we saw a bulge that, like the gamma curve, brightened the darkest scenes considerably. However, the curve then drastically changed, and the measured result dropped below the reference line, diminishing the dynamism of the film even further.

We tested the television in movie mode, which theoretically should provide the best and most natural colors. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant deficiencies in displaying red. Poorly tuned white balance and too low saturation of this color cause the image to appear too cool. As a result, one might get the impression that the displayed content is simply lacking in vibrant colors. The situation is exacerbated by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, the Philips menu offers many functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

Samsung even with its entry-level televisions, provides advanced tools for calibration, and we put these to work. The results of our efforts were more than satisfying. The white balance, which previously had a strong yellowish tint in both scenarios, now looks much improved, although slight deviations from the ideal are still noticeable. Nevertheless, the image is significantly cleaner than before the calibration process. We were able to model the gamma well for SDR materials, achieving as much contrast as the television can provide. The EOTF curve has also been adjusted, preventing the image from becoming excessively lightened or darkened. However, it is worth noting that for HDR materials, the deltaE errors remain quite high, with the primary issue being the unit's insufficient brightness.

After professional calibration, it is clear that the PUS7000 responds well to image adjustments. In this price range, this is not a given. The effects should be assessed in two scenarios, depending on what content we plan to watch. SDR performs the best. After our corrections, the image looks really good. Most color errors fell below level 3, which is the threshold at which distortions typically become visible to the naked eye in measurements. Movies, series, sports, and regular television present themselves naturally, without unpleasant deviations. If someone primarily watches classic channels or streaming in HD quality, the difference after calibration will be noticeable immediately. However, it must be made clear that the PUS7000 is still not a television suitable for sensible HDR, and calibration does not change much here. The reason lies in the hardware: colors remain too undersaturated. The television lacks solutions that expand the color gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot show the intense colors required by HDR. This is most evident in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it results from the design of the backlighting and the panel itself.

Let’s revisit the smoothing of tonal transitions function. It can be set to either "off" or "auto." As expected, setting it to "off" results in significant gradation issues. On the other hand, when set to "auto," both movies and TV shows offer smoother colour transitions. However, this function has notable drawbacks: it interferes with the director’s intent by softening the effect of film grain and, more concerning, it often blurs small details, misinterpreting them in the process. For this reason, we consider this feature ineffective and do not recommend using it, as the tests for tonal transition smoothness were conducted with this function turned off.

Next, we assessed the image scaling, which is crucial for watching lower-resolution materials. Unfortunately, as this is one of the manufacturer’s lower-end models, the scaling function does not perform well. The result is heavily blurred details, and a noticeable white halo forms around characters, detracting from the viewing experience.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at a low setting. However, it has a flaw: if the action is too aggressive, it can introduce undesirable artifacts on the screen. It’s a good idea to experiment with this setting to find the sweet spot between a smooth image and detail clarity.

The upscaling, which is the enhancement of lower quality materials to 4K, is adequate. The image after processing is very "soft," which is typical for almost all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu to achieve a more pronounced effect.

Although the Samsung DU7192 is the entry-level model in the manufacturer’s range, it does come equipped with motion smoothing technology. While this feature is somewhat limited in comparison to higher-end models, its inclusion is a notable advantage in its price category. The maximum refresh rate available on the TV is 60 Hz, which is adequate for movies and TV shows but falls short for fast-moving content like sports.

Within the motion smoothing settings, there are two features aimed at improving fluidity: "Motion Blur Reduction" and "Clear Motion (LED)." We’ll discuss the latter later, but first, let’s focus on the former. Unfortunately, despite being present, we found no noticeable difference when adjusting this setting. Regardless of the chosen option, the picture maintained the same stuttering effect typically associated with 24 fps content.

The Samsung DU7192 uses a panel with an average response time. However, it is worth noting that this type of panel outperforms VA panels in a similar price range, making it a more suitable option for watching sports compared to other budget models.

In this regard, we don't really have any good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually standard, and it's hard to expect more. However, the worst part is that the TV does not have any motion smoothing features. There are no supporting systems for either movies or sports. We have to accept that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, the motion may appear choppy or unclear. We have no way to enable any smoother that would soften this effect.

The Samsung DU7192 is equipped only with HDMI 2.0 ports, which is to be expected given the device's price point and its target consumer market. As a result, it does not support the highest resolutions or frame rates available on the latest generation consoles. It does, however, feature the basic gaming functionality of ALLM (Auto Low Latency Mode). Unfortunately, it is disappointing that the manufacturer did not include GameBar, a feature that has become a standard even in lower-end TVs. GameBar would have provided significant convenience by allowing gamers to easily adjust settings quickly during gameplay.

Although the PUS7000 is not marketed as a gaming TV, it does not perform as poorly in this category as one might expect. While there is no support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has included several important features that genuinely improve the comfort of playing on a console. The most significant of these are VRR and ALLM technologies. VRR is responsible for synchronizing the screen with the number of frames generated by the console. This prevents the image from "tearing" and keeps it consistent even during sudden frame drops in the game. In turn, ALLM is a solution that automatically switches the TV to the lowest latency mode right after detecting a signal from the console. All of these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick overview of current settings and connection status without interrupting gameplay, which is a very convenient solution.