Samsung DU7192 (IPS) vs Haier Q80FUX

The maximum luminance for HDR content on the Samsung DU7192 is 245 nits, but is often exceeded by even lower results. Such values are insufficient for comfortable viewing of HDR material due to the lack of appropriate image dynamics and the colour distortions caused by the device's low brightness. While the manufacturer has equipped the device with an HDR format featuring dynamic metadata, specifically HDR10+, it is rarely used compared to Dolby Vision, which Samsung has yet to introduce in its televisions. It is also worth noting that the Samsung DU7192 only covers 82% of the wide colour gamut DCI-P3, meaning that sending signals in a wide dynamic range should be avoided, as significant colour loss will be evident.

Overall, the Samsung DU7192 delivers high-quality images that will satisfy most users. The television stands out particularly for its vivid colours and decent contrast. Thanks to UHD technology, the image on the screen is sharp and clear, even during fast-moving scenes. The DU7192 also supports HDR, allowing for better reproduction of details in bright and dark areas of the image.

Alright, let's move on to the topic that generates so much discussion, namely the capabilities of the TV in HDR mode. Let's make it clear right away: the Haier Q80FUX is certainly not a brightness demon. The panel of this receiver can generate about 350 nits at peak, which in today’s reality is an absolute minimum to even talk about the presence of extended HDR tonal dynamic range. On the plus side, this power is at least stable – regardless of the test pattern or movie scene we used, the measurements invariably oscillated around 300-350 nits. These are therefore at best adequate results, definitely far from the stunning showcase of capabilities that we know from more expensive models. Fortunately, there is one aspect in which the Q80FUX makes up for these shortcomings and does so abundantly. After all, we are talking about a QLED TV (or more precisely, PFS LED), which means that thanks to the quantum dot filter applied to the matrix, it can generate really juicy, vibrant colors. These are not empty promises – a DCI-P3 color gamut coverage reaching nearly 95% is an impressive result that directly translates into very pleasant, saturated colors for the eye.

The best factory mode we used throughout the testing process was "Filmmaker." However, like most modes, it had its drawbacks. Starting with the most basic chart, the white balance, we observed a pronounced dominance of red in SDR and HDR modes. Although green also appeared in HDR mode, it did not significantly affect the overall perception. This resulted in an image with a noticeable yellow tint, particularly evident on the whites and the faces of the actors.

Another important chart, arguably more significant, is gamma, which controls contrast in materials with a standard colour palette. In factory mode it performed reasonably well, but with one notable issue regarding the darkest scenes. Here, it was significantly lowered, resulting in excessive brightening, which robbed the film of its contrast and suspense.

As for HDR content, the white balance remained similar. The main change occurred in the EOTF curve chart. Initially, we saw a bulge that, like the gamma curve, brightened the darkest scenes considerably. However, the curve then drastically changed, and the measured result dropped below the reference line, diminishing the dynamism of the film even further.

Factory settings for film mode are rarely perfect, but in the case of the Q80FUX, we encountered a noticeable imbalance. In SDR content, the image was definitely too warm, which resulted from an excessive amount of red in the white balance, giving it a slightly sepia tone. Contrarily, in HDR materials, the television fell into the other extreme—the excess of blue created an unnatural, cold effect. However, it wasn’t the whimsical white balance that was the biggest problem with this TV. The real culprit, responsible for the previously described issues, was hidden deeper. It turned out that the Q80FUX had completely misaligned gamma values and, crucially for HDR, a poorly managed EOTF curve. It was these erroneous factory settings that caused notorious clipping of the brightest parts of the image, applying that characteristic milky filter over them. Thus, we found the source of the problem. This state of affairs led to overall, significant color errors that were easy to catch even for an untrained eye. Like every television we tested, we decided to calibrate this model as well, and you can find the results of those adjustments in the next paragraph.

Samsung even with its entry-level televisions, provides advanced tools for calibration, and we put these to work. The results of our efforts were more than satisfying. The white balance, which previously had a strong yellowish tint in both scenarios, now looks much improved, although slight deviations from the ideal are still noticeable. Nevertheless, the image is significantly cleaner than before the calibration process. We were able to model the gamma well for SDR materials, achieving as much contrast as the television can provide. The EOTF curve has also been adjusted, preventing the image from becoming excessively lightened or darkened. However, it is worth noting that for HDR materials, the deltaE errors remain quite high, with the primary issue being the unit's insufficient brightness.

The results of our calibration efforts must, unfortunately, be considered twofold. Overall, the image is indisputably better than before the corrections, but the biggest winner of this process turned out to be SDR content. It is here, after clarifying the gamma and white balance graphs, that we obtained results that can confidently be called very good. After the setup, the Q80FUX truly shines in standard dynamics, showing only slight errors in the most challenging skin tone reproductions. Unfortunately, the weakest link still remains HDR content. And here lies the paradox: even though we managed to calibrate the white balance almost to perfection, the overall color errors still remain at a fairly high level. The reason is that the television still interprets the static HDR10 metadata "in its own way," stubbornly enforcing that unfortunate washed-out image effect, which inevitably leads to significant distortions. Although we successfully eliminated the factory excess of blue color, due to this electronic interference, the screen can still tend to fall into somewhat too cold tones. This television just has it this way.

Let’s revisit the smoothing of tonal transitions function. It can be set to either "off" or "auto." As expected, setting it to "off" results in significant gradation issues. On the other hand, when set to "auto," both movies and TV shows offer smoother colour transitions. However, this function has notable drawbacks: it interferes with the director’s intent by softening the effect of film grain and, more concerning, it often blurs small details, misinterpreting them in the process. For this reason, we consider this feature ineffective and do not recommend using it, as the tests for tonal transition smoothness were conducted with this function turned off.

Next, we assessed the image scaling, which is crucial for watching lower-resolution materials. Unfortunately, as this is one of the manufacturer’s lower-end models, the scaling function does not perform well. The result is heavily blurred details, and a noticeable white halo forms around characters, detracting from the viewing experience.

If there is one area where Haier clearly shows that it has quite a bit to catch up on compared to the market leaders, it is digital image processing. The upscaling, well... is just okay. And that's about all that can be said about it. It does what it is supposed to do: it ensures that lower resolution signals don't scare you with harsh pixelation on the screen and don't look like an overly enlarged postage stamp. However, it is far from the finesse and "intelligent" sharpening that more experienced players in this market have developed over the years. The biggest drawback of the Q80FUX software, however, is the almost complete lack of additional "cleaning" and smoothing functions for the image. The receiver does not offer any noise reduction or gradient enhancement mechanisms. This means that with older or more heavily compressed materials, we simply have to accept that any imperfections in tonal transitions or color blending, which we mentioned earlier, will constantly accompany us during the viewing.

Although the Samsung DU7192 is the entry-level model in the manufacturer’s range, it does come equipped with motion smoothing technology. While this feature is somewhat limited in comparison to higher-end models, its inclusion is a notable advantage in its price category. The maximum refresh rate available on the TV is 60 Hz, which is adequate for movies and TV shows but falls short for fast-moving content like sports.

Within the motion smoothing settings, there are two features aimed at improving fluidity: "Motion Blur Reduction" and "Clear Motion (LED)." We’ll discuss the latter later, but first, let’s focus on the former. Unfortunately, despite being present, we found no noticeable difference when adjusting this setting. Regardless of the chosen option, the picture maintained the same stuttering effect typically associated with 24 fps content.

The Samsung DU7192 uses a panel with an average response time. However, it is worth noting that this type of panel outperforms VA panels in a similar price range, making it a more suitable option for watching sports compared to other budget models.

The issue of motion fluidity and blurring is largely predetermined by the use of a 60Hz panel, which naturally makes it difficult to recommend this receiver to enthusiasts of very dynamic content. Fortunately, in the Q80FUX, we find a few options (though, as we will see shortly, actually only one) designed to improve the experience with older film productions. There is a "De-Judder" slider available, which indeed affects the smoothness of the image and allows us to adjust it to our preferences: from raw, cinematic frame rates to a more theatrical, smoothed presentation. However, a genuine surprise awaits us right next to it in the menu. There is also a second slider, supposedly dedicated to eliminating blur – this is a feature we usually encounter in 120Hz panels, aimed at combating motion blur in sports. However, as expected, recalling memories from testing the K85F model, here too this slider is merely a facade. Moving it does absolutely nothing to the image and it simply looks like an oversight by the product engineers who left a non-functional option in the software for this type of panel.

The Samsung DU7192 is equipped only with HDMI 2.0 ports, which is to be expected given the device's price point and its target consumer market. As a result, it does not support the highest resolutions or frame rates available on the latest generation consoles. It does, however, feature the basic gaming functionality of ALLM (Auto Low Latency Mode). Unfortunately, it is disappointing that the manufacturer did not include GameBar, a feature that has become a standard even in lower-end TVs. GameBar would have provided significant convenience by allowing gamers to easily adjust settings quickly during gameplay.

Stepping into the gaming territory, the Haier Q80FUX proves to be quite a decent companion for the "casual gamer." On board, we find today’s highly desired features like VRR (variable refresh rate) and ALLM (automatic low latency mode). However, the biggest surprise is something else. Although we are not dealing with a 4K@120Hz panel, the TV can accept and display a 120Hz signal at a lower resolution (Full HD). This is a very useful feature, allowing the conscious switch of the console to a lower resolution mode in exchange for significantly higher fluidity, which is a perfectly acceptable compromise in the gaming world.

We won’t particularly complain about the lack of extras like the "Game Bar," as it’s just a nice addition. The most concerning issues arise when we enter the world of HDR in games. Due to the fact that the TV constantly adapts the signal "in its own way," setting the brightness on the console according to the HGIG standard is nearly impossible to accomplish as per the instructions. Worse still, in the Dolby Vision mode for games, the input lag rises to about 50 ms, which is a high enough value that essentially makes this mode unusable. However, generally, we wouldn’t recommend gaming on this TV in HDR mode, so these aren’t such serious shortcomings. The most pleasing aspect is the presence of 120Hz in Full HD, which makes the Q80FUX quite a nice TV for the occasional gamer.