PHILIPS PUS9060 vs Samsung Q6F (IPS)

The One is bright enough to enjoy movies recorded in HDR format. The average brightness of this model is about 500 nits, so we can count on a pleasant viewing experience for movies from streaming platforms without any issues. Of course, it could always be better, because when it comes to brightness, there is never too much for this type of content. Unfortunately, a disappointing surprise may be the DCI-P3 color gamut coverage offered by the PUS9060. Although the manufacturer boasts about using a QLED filter here (it’s actually PFS LED), it's hard to talk about any positive effects of its operation. 85% DCI-P3 color gamut coverage is definitely not a level to brag about in 2025 – especially in a television advertised as QLED.

Unfortunately, the Samsung Q6F is a very dark model. Its peak brightness in HDR does not exceed 250 nits, which is definitely too low to even speak of any "high dynamic range" effect, or HDR. In practice, it's better to stick to content in SDR format, which simply looks more predictable on this TV. Another problem is the global dimming technique – in scenes with a lot of black, the TV drastically dims the entire panel to artificially improve the black levels. This causes the image to become even darker, and brightness can drop below 100 nits. The only consolation is the QLED technology, but even here it's average. The applied quantum dot layer is not top-notch, as the coverage of the DCI-P3 color gamut does not exceed 90%. As a result, colors in HDR content may just seem under-saturated.

We tested the PUS9060 in the best factory mode it employs – of course, we’re talking about movie mode. Unfortunately, the best in this case doesn’t mean good. The picture in this mode was distinctly yellowed and leaned towards orange tones. The white balance on this TV was definitely too warm, resulting in an artificial, somewhat "sun-kissed" look for the entire scene. This directly translated to significant color errors, which in the worst cases exceeded a delta E value of 6 – thus, they were visible to the naked eye. The situation was the opposite in HDR mode, where the picture became too blue and too cold in appearance. Additionally, there was a slight increase in brightness – the gamma curve and EOTF suggested that the TV slightly brightens the image, which was also evident in the comparison photo below.

We tested the television in Filmmaker mode, which showed us two completely different faces of this model. Looking at SDR content, we were honestly shocked at how good this TV looks straight out of the box. It was really hard to nitpick anything here. Despite a slight “haze” in the white balance or somewhat brightened details in the blacks (which directly results from the IPS panel's design), color errors hovered around the “2” level. This is surprisingly good, even outstanding, considering the price of this device.

On the other hand, what the Q6F displayed in terms of colors after switching to HDR mode was a very unpleasant surprise. The errors in color reproduction and palette were so huge that our charts literally ran out of scale. Of course, since Samsung even in such an inexpensive model offers very advanced calibration possibilities, we decided to approach the subject professionally and check what could be done about it during calibration.

Thanks to calibration in movie mode, we managed to completely eliminate the yellow-orange hue, which significantly improved the reception of the entire scene. The image has become much more visually pleasant, although it still falls short of reference settings. It may now appear slightly bluish, but it is still a significant improvement compared to the factory settings.

Unfortunately, we could not significantly improve the brightness characteristics, but that is more about the construction of the TV itself – the lack of local dimming limits the possibilities for precise brightness management. The PUS9060 simply cannot dynamically adjust luminance like more advanced models do. Nonetheless, after calibration, the overall reception is much more enjoyable, especially in film materials.

After our calibration, the colors in SDR mode looked even better – the result is quite surprising, as color errors at level "1" are something usually seen in devices costing several thousand dollars. In this regard, the Q6F is really a great screen for everyday television, less demanding series, or movies. Unfortunately, our interference in HDR mode did not bring about a noticeable improvement. The television, due to its poor black levels and low coverage of a wide color gamut, still has significant problems with proper color saturation, especially red. This is an example of a device where HDR mainly exists as a label on the box – for everyday use, we definitely recommend watching content in SDR format.

In the PUS9060, we find the latest version of the image processor called P5 Perfect Picture, which is designed to improve the picture - especially the imperfect ones. The TV features a distortion reduction function, which smooths out tonal transitions, that is, those "color joins" mentioned earlier. And this function does so very effectively - there is no strong color gradation, but unfortunately, it works aggressively enough that it sometimes dims desired elements, such as material textures or film grain. So this can be considered a compromise. We would not recommend using this function for movies, but for more casual content - such as YouTube or regular television - absolutely.

The P5 processor also improves the quality of lower resolution images, and it does this quite effectively. The test image with the model is very soft - sometimes even too much - but this can be easily adjusted with the sharpness slider to match personal preferences. It is also pleasing that the TV does not cut off edges in SD content - which unfortunately still happens in some TV models.

The Q6F handles upscaling lower resolution content to native 4K very well. The scaling is surprisingly good here, even for such a budget TV from the QLED series. The only downside is when we watch very low-resolution material, like 576p (typical for old DVD players) – then the image may be slightly cropped. This is because the TV does not allow for the Overscan feature to be turned off, which is a common issue with Samsung devices.

The situation is completely different when it comes to digital processing, which is the attempt to smooth the image from unwanted artifacts. Here, the TV completely fails. Although we find a function in the menu called "Noise Reduction", it yields no visible results regardless of the slider setting. The only thing it seems to do is introduce unwanted errors into the image. Despite its presence in the system, we definitely do not recommend using it.

PHILIPS PUS9060 is equipped with a 4K display with a 144 Hz refresh rate, so we can confidently say that it is suitable for both watching sports and playing games. And indeed, it is. But what about movies that are most often recorded at 24 frames? Like most of the TVs we tested with a refresh rate of 120 Hz and higher, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in movies – you can set the image to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight “jump” in frame rate (lower settings). Additionally, there is a function called "Motion Blur Reduction," which reduces blurring – and this is a very useful feature, especially when watching sports.

The 60 Hz panel in the Samsung Q6F is the standard in this price range, which makes it a rather average model for dynamic sports or gaming. However, in the case of movies, the TV performs quite well thanks to the smoothing feature. The "Motion Smoothing" option allows you to adjust the fluidity of motion to your own preferences – from maintaining a cinematic feel to full fluidity.

The PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. It features VRR, ALLM, and also includes HGiG implementation, which helps set up HDR in games as the developers intended. The TV supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you’re playing on Xbox, PS5, or a PC, everything works as it should. There is also a simple Game Bar, which is a special menu for gamers that allows you to quickly check if the ALLM mode is indeed functioning in the lowest latency setting.

And of course – Ambilight TV. Let's be honest – without LEDs on the back, it’s not a true gaming device. 😉 The multicolored backlighting can really enhance the atmosphere, especially in the evening. It may not be to everyone's taste, but younger gamers will be thrilled – because it simply looks impressive.

We won’t beat around the bush – the Q6F is not a television designed with gamers in mind. While it does have features like ALLM (Auto Low Latency Mode) and VRR frame synchronization for consoles, the list of benefits pretty much ends there. Besides these basics, the TV offers nothing more that might satisfy those who spend a lot of time in front of a console. It’s a real shame that such a useful tool as Game Bar is missing here, which in Samsung’s higher models allows for quick control of game parameters. In terms of gaming, this is an absolutely basic model and is only suitable for "casual" gamers.