PHILIPS PUS9060 vs Dreame Q100

The One is bright enough to enjoy movies recorded in HDR format. The average brightness of this model is about 500 nits, so we can count on a pleasant viewing experience for movies from streaming platforms without any issues. Of course, it could always be better, because when it comes to brightness, there is never too much for this type of content. Unfortunately, a disappointing surprise may be the DCI-P3 color gamut coverage offered by the PUS9060. Although the manufacturer boasts about using a QLED filter here (it’s actually PFS LED), it's hard to talk about any positive effects of its operation. 85% DCI-P3 color gamut coverage is definitely not a level to brag about in 2025 – especially in a television advertised as QLED.

Unfortunately, the Dreame Q100 is too basic and, above all, too dim to be said to deliver a true HDR effect. Our measured brightness reaches a maximum of about 300 nits, which is definitely too low for bright parts of the image to truly pop. In fact, that’s a level we more often associate with SDR material than with HDR. It therefore lacks the brightness headroom offered by more expensive TVs that makes highlights, reflections, or the sun look noticeably more impressive.

HDR Colors

Fortunately the Q100 makes up for it a bit elsewhere. The manufacturer calls it a QLED TV, though in practice color gamut expansion is handled by a PFS filter. Our measurements showed roughly 92% coverage of the DCI-P3 color space and about 67% of BT.2020. These aren’t top-tier numbers, but they are still clearly better than basic LCD TVs without an additional gamut-expanding layer. As a result, HDR content can at least offer more saturated and varied colors, even if the peak brightness itself still doesn’t allow us to speak of a fully fledged HDR effect.

We tested the PUS9060 in the best factory mode it employs – of course, we’re talking about movie mode. Unfortunately, the best in this case doesn’t mean good. The picture in this mode was distinctly yellowed and leaned towards orange tones. The white balance on this TV was definitely too warm, resulting in an artificial, somewhat "sun-kissed" look for the entire scene. This directly translated to significant color errors, which in the worst cases exceeded a delta E value of 6 – thus, they were visible to the naked eye. The situation was the opposite in HDR mode, where the picture became too blue and too cold in appearance. Additionally, there was a slight increase in brightness – the gamma curve and EOTF suggested that the TV slightly brightens the image, which was also evident in the comparison photo below.

For testing we chose the "Film" mode and in our opinion it is by far the best of the available presets. There are no heavily boosted, unnatural colors you can see in the Vivid/Dynamic mode. The picture already looks quite reasonable out of the box, though it falls a bit short of perfect. In SDR material the most noticeable issue was a slight warming of the image. The white balance had too much red, so whites leaned toward a warmer tone, and a similar tint was visible in shades of gray. In HDR the situation was a bit different. Here blue had a slight edge, making the image a touch cooler. These are not major faults, though. For such an inexpensive TV, the factory settings on our unit were pretty decent and the "Film" mode delivers a relatively natural image without much fiddling with the settings.

Thanks to calibration in movie mode, we managed to completely eliminate the yellow-orange hue, which significantly improved the reception of the entire scene. The image has become much more visually pleasant, although it still falls short of reference settings. It may now appear slightly bluish, but it is still a significant improvement compared to the factory settings.

Unfortunately, we could not significantly improve the brightness characteristics, but that is more about the construction of the TV itself – the lack of local dimming limits the possibilities for precise brightness management. The PUS9060 simply cannot dynamically adjust luminance like more advanced models do. Nonetheless, after calibration, the overall reception is much more enjoyable, especially in film materials.

Contrary to appearances, the Dreame Q100 is quite well equipped for image calibration. The menu contains plenty of advanced picture settings that let you adjust its characteristics fairly precisely. In our case most work was needed on the white balance in both SDR and HDR. After calibration, SDR content looked very good. We managed to achieve an almost neutral white balance and natural colors, and the main remaining limitation was the black level itself, caused by the panel design and the lack of local dimming.

In HDR we were also able to improve white balance and color reproduction, but here the TV's electronic limitations become apparent sooner. Even after very precise EOTF curve adjustments, the Q100 doesn't always follow it correctly during real scenes. In some content it can also brighten the image, making certain parts look lighter than they should, and in bright areas some detail can be lost in the process.

In the PUS9060, we find the latest version of the image processor called P5 Perfect Picture, which is designed to improve the picture - especially the imperfect ones. The TV features a distortion reduction function, which smooths out tonal transitions, that is, those "color joins" mentioned earlier. And this function does so very effectively - there is no strong color gradation, but unfortunately, it works aggressively enough that it sometimes dims desired elements, such as material textures or film grain. So this can be considered a compromise. We would not recommend using this function for movies, but for more casual content - such as YouTube or regular television - absolutely.

The P5 processor also improves the quality of lower resolution images, and it does this quite effectively. The test image with the model is very soft - sometimes even too much - but this can be easily adjusted with the sharpness slider to match personal preferences. It is also pleasing that the TV does not cut off edges in SD content - which unfortunately still happens in some TV models.

The weakest point of the Dreame Q100 is its digital image processing capabilities. The processor used does a rather mediocre job of improving weaker sources, and the menu doesn't include any function that effectively smooths unattractive tonal transitions or reduces visible posterization. Upscaling itself also fails to impress. With low-resolution content the image is fairly soft and lacks strong detail reproduction. Additionally, the Q100 tends to overscan, meaning it slightly crops the edges of the image with very poor sources, such as 480p content. In everyday viewing of HD or 4K content this won't be a major issue, but with older recordings the processor's limitations are already clearly visible.

PHILIPS PUS9060 is equipped with a 4K display with a 144 Hz refresh rate, so we can confidently say that it is suitable for both watching sports and playing games. And indeed, it is. But what about movies that are most often recorded at 24 frames? Like most of the TVs we tested with a refresh rate of 120 Hz and higher, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in movies – you can set the image to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight “jump” in frame rate (lower settings). Additionally, there is a function called "Motion Blur Reduction," which reduces blurring – and this is a very useful feature, especially when watching sports.

The VA panel used in the Dreame Q100 has a native 60 Hz refresh rate, so from the outset this isn’t a TV aimed at the most demanding sports fans or gamers. The manufacturer does note the possibility of running at 120 Hz, and that option is indeed available, but it mainly applies to a mode intended for gamers. In everyday use the Q100 should therefore be treated as a standard 60 Hz TV. During fast-paced sports broadcasts or quick gameplay this means less smoothness than models with 120 Hz panels or higher. On the plus side, the panel’s response time is decent. The VA panel doesn’t produce excessive smearing, so motion remains fairly clear and doesn’t leave heavy, blurred trails behind objects. For movies you can also use a simple motion‑smoothing system; the manufacturer has prepared several presets that help reduce the characteristic judder in material shot at 24 frames per second.

The PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. It features VRR, ALLM, and also includes HGiG implementation, which helps set up HDR in games as the developers intended. The TV supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you’re playing on Xbox, PS5, or a PC, everything works as it should. There is also a simple Game Bar, which is a special menu for gamers that allows you to quickly check if the ALLM mode is indeed functioning in the lowest latency setting.

And of course – Ambilight TV. Let's be honest – without LEDs on the back, it’s not a true gaming device. 😉 The multicolored backlighting can really enhance the atmosphere, especially in the evening. It may not be to everyone's taste, but younger gamers will be thrilled – because it simply looks impressive.

Dreame Q100 is not a strictly gaming device, but it delivers a pretty reasonable package for console use. You get VRR to eliminate screen tearing and ALLM, which automatically switches the TV to a low-latency mode when it detects a console signal. An interesting compromise is support for a 120 Hz mode. The panel won’t reach that refresh rate at 4K, but if you drop to 1080p you can play at 120 frames per second. If a given title prioritizes smoothness over high resolution (and the game itself offers such a mode), it’s worth using. There’s also a handy Game Bar on board that lets you quickly change screen settings, switch the refresh mode, or add a virtual crosshair. The HGiG implementation is admittedly weak, but credit is due for support of Dolby Vision Gaming on the Xbox Series X and S. This isn’t a panel for tech purists, but for casual console gaming, especially with the option to trade 4K for smoother Full HD, it performs flawlessly.