Philips PUS8500 vs Hisense UR8S

When it comes to HDR performance on the PUS8560, one can confidently say that it is quite average. The brightness of the panel is around 350 nits, which we consider to be the absolute minimum for viewing content in this format. However, this is not a result that will impress viewers looking for the best possible image.

On the plus side, it is worth noting that the PUS8500 series – including the PUS8560/12 we tested – is marketed as a QLED television. And indeed, we can expect a wider color gamut here. This model is equipped with an additional filter (PFS), and the coverage of the DCI-P3 color space at around 90% should be sufficient for the majority of users. This filter works very similarly to quantum dots. As a result, the colors are quite well saturated. It’s not an outstanding result, but perfectly adequate for watching movies and series on streaming platforms.

UR8S is a slightly higher-end Mini-LED, so you could expect a lot in terms of brightness. And indeed, on a synthetic test pattern the peak brightness reached around 2200 nits. That's a very good result, but as always what matters more is what the TV does in normal film scenes. Here the results are a bit more uneven. In bright scenes with a lot of light on screen, the UR8S can deliver really strong HDR. Brightness then reaches about 1500 nits, so the image is very intense and has a lot of punch. It's worse with small bright elements on a dark background. The TV noticeably dims them to maintain good blacks and avoid excessive blooming. As a result, things like single stars or tiny specular highlights can be only around 200 nits. And here HDR is no longer as impressive. So the local dimming algorithm works effectively, but it comes at a cost, sometimes it simply sacrifices the brightness of small details too much in favor of contrast.

Colors

With RGB Mini-LED TVs, colors should be evaluated a bit differently than usual. If we look solely at the panel's capabilities, the UR8S performs great. We measured about 94% coverage of BT.2020 and practically full DCI-P3. These are among the highest values currently found in LCD TVs, and this is where the potential of RGB backlighting is most apparent. The problem is that this potential isn't always used in real scenes. When we ran the same measurements on patterns with an overlaid film background, the saturation of some colors dropped noticeably. Individual zones can't always control the three RGB components as precisely when the scene becomes more complex. This is most noticeable with blue and magenta. In simple test patterns they can look very strong, but in tougher scenes samples of those colors clearly shrink. So the UR8S has enormous potential, but the TV can't always make full use of it.

We tested the TV on the best available factory settings, which is in Film/Filmmaker mode – this is the mode we recommend for everyday viewing. Unfortunately, it is not without its flaws. Both in HD and HDR content, the image had a clear tendency to appear pinkish, caused by too much red and blue in the white balance. Another problem turned out to be excessive brightness of the image, which was confirmed by both the gamma chart and the EOTF curve. This characteristic was responsible for the loss of detail and washed-out colors in more challenging HDR scenes, as we mentioned earlier. Overall, this led to quite significant color reproduction errors – in extreme cases, the delta E value exceeded 7, while the threshold of visible errors for the human eye is about 3. This situation can be improved through calibration, and you can read about its effects below.

For evaluating out-of-the-box colors we used Filmmaker mode, which is supposed to show the image as close as possible to how the material was intended. Looking at white balance alone, the UR8S does quite well. There is no strong color cast that immediately jumps out, although as brightness increases a bit too much blue and red appear while green becomes deficient. Color errors therefore show up in measurements, but the image itself does not look bad.

We have far bigger reservations about how the UR8S manages image brightness. In SDR the gamma stays around 1.9 to 2.0 for most of the range instead of the target 2.4. In practice this simply means the image is too bright, especially in the midtones. Shadows are lifted too much, so the image loses some depth. A similar trend is visible in HDR. The EOTF curve sits above the reference value for a large portion of the range, so the UR8S again brightens the image more than it should. This is not a matter of the TV lacking brightness; it has plenty of it. The issue is how it manages that brightness. As a result, HDR material can look very striking, but not always exactly as it should.

The Dutch manufacturer offers quite a large dose of settings in their products, so as usual, we decided to dig a little into them. The effects are immediately visible – we managed to correct the white balance, which made the image stop appearing excessively pink. The brightness characteristics were also partially balanced, of course, within the limits that the television itself allows. The image is no longer overly vibrant, and the overall reception after calibration is definitely better than in the factory settings of the Filmmaker mode.

One could only criticize the characteristics of the EOTF curve, which still indicates that the image tends to lighten materials in HDR format. Despite our efforts, the darkest parts of scenes can still be too bright, and the brightest do not always reach their full contrast potential. However, it must be clearly stated that we are dealing with a typically budget construction – you cannot expect reference-quality reproduction of HDR content from it.

Calibration definitely helped this model – it improved the balance, toned down the aggressive color scheme, and brought the image closer to what one might expect from a well-configured movie mode. However, there are certain limitations that cannot be overlooked.

Hisense offers quite a few calibration options, and in SDR you can achieve a really good result with them. After calibration, the white balance is practically uniform across the entire range, and color errors drop to very low values. The UR8S can be adjusted very precisely here. HDR looks a bit different. The white balance itself can also be noticeably improved, although at the highest brightness levels larger deviations start to appear. What's most interesting, however, is the behavior of the EOTF curve. Even after it is properly set on test patterns, the UR8S can still interpret brightness its own way during movie playback. Depending on the scene, parts of the image are slightly brightened while others are darkened compared to how they should look. This shows that the algorithms responsible for backlight control have a fairly large impact on the final image. So calibration can greatly improve colors, but we can't completely "turn off" the way the UR8S manages brightness in HDR.

Philips PUS8560 offers a feature that reduces posterization, hidden under the name "distortion reduction." And while it indeed serves its purpose by smoothing problematic tonal transitions, it operates a bit too broadly. In practice, it affects not only colorful gradients but also softens faces, clothing textures, and furniture surfaces. This decreases the authenticity of the image—especially in films where natural texture is of great importance. However, if someone is looking for smoothing at all costs, it's best to set this option to "Low." For cinema image enthusiasts—definitely not recommended.

On the plus side, the quality of upscaling older materials should be noted—the PUS8560 model handles them surprisingly well. The image maintains a natural softness without artificially enhanced sharpness. It is also worth mentioning that the television correctly displays very low-resolution content, avoiding problems with cropping the edges of the image (so-called overscan).

A major advantage of the UR8S is its MediaTek Pentonic 800 processor, and digital image processing is one of this model’s strengths. The TV handles smoothing tonal transitions very well, especially with lower-quality sources. The feature responsible for this effect works effectively without overly interfering with the picture. Even at the medium setting it can noticeably reduce visible banding and unevenness without heavily blurring details. Upscaling also performs very well. Lower-resolution content is displayed cleanly, edges look natural, and the image isn’t overly sharpened. The UR8S simply copes very well with weaker signals, and in that respect it’s one of its clear strengths.

The Philips PUS8560 is a television equipped with a 60 Hz refresh rate panel, which already limits its capabilities for displaying dynamic content. Watching sports or playing on a console is not one of the most enjoyable experiences. The situation is further worsened by the lack of any option to improve the smoothness of films. In the menu, we won't find settings that would allow for the activation of a motion smoother or even a slight motion smoothing in films recorded at 24 frames per second. You can imagine the effect. The picture may look jerky, especially in shots with panoramic camera movements.

The UR8S is equipped with a panel that has a native 180 Hz refresh rate, so it already offers great potential for smooth motion. The panel itself performs really well, though some limitations typical of VA panels are still visible. Smearing is relatively low for this type of screen, but with faster motion (especially on darker backgrounds) it can still be noticed, particularly when compared with the same image on OLED TVs.

Although the Philips PUS8560 is not designed specifically for gamers, the manufacturer decided to equip it with several features that may prove useful when connecting a console. It includes automatic switching to game mode (ALLM), as well as a simple connection status information bar – the so-called Game Bar. While it does not make a particularly strong visual impression, it serves its purpose. The presence of variable refresh rate (VRR), operating in the range of 48 to 60 Hz, might come as a surprise. While this is not a wide range, in the case of less demanding games or titles with unstable fluidity, VRR can help reduce the stuttering effect. However, this is the only element that can be considered above the minimum.

It should be clearly stated that the PUS8560 is not hardware for gamers looking for a responsive screen and full support for modern console features. It lacks HDMI 2.1 ports, the refresh rate is limited to 60 Hz, and the panel's response time is not among the fastest. This model may be suitable at most for casual gamers who want to enjoy the Ambilight system.

In terms of gamer features the UR8S performs really well. The TV supports practically everything you’d expect from a modern console or PC display. It offers ALLM, VRR, and 4K at 120 Hz. It also supports Dolby Vision in game mode, so when using an Xbox Series X you don’t have to give up that HDR format. PC gamers get even more options. The panel can run at 4K/180 Hz, and dropping to Full HD can raise the refresh rate up to 330 Hz. There’s also a Game Bar that lets you quickly view key information and change gaming-related settings. The only clear shortcoming is a proper implementation of HGiG. With it enabled the TV still interferes with HDR brightness mapping, so we don’t get the effect intended by that standard. Aside from that, the UR8S is very well prepared for both consoles and a powerful PC.