Philips PUS8359 (IPS) vs Samsung Q7F

The quality of HDR effect on the Philips PUS8359/12 television is also not impressive. A brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly visible on the five tested images. Additionally, the television does not impress in terms of color gamut coverage – just 76% DCI-P3 is a result that can be considered weak, especially compared to other models in a similar price range.

Unfortunately, the Samsung Q7F is not one of the bright televisions, and this directly affects the quality of HDR movies. The peak brightness of the panel is only about 250 nits, which is definitely too low to speak of true cinematic experiences. In practice, the image in HDR content does not differ significantly from classic SDR, making it hard to talk about any "wow effect" that usually accompanies us while watching such films. During testing movie scenes, the image simply looked dim, and brightness almost invariably hovered around the mentioned 250 nits. The worst performance was observed in shots with small, intensely glowing elements – the applied global dimming technique reacted very aggressively, dimming the entire screen to maintain the black effect. On the plus side, it is worth noting the presence of a QLED coating that expands the color palette. As a budget QLED model, the Q7F performs quite decently here: its DCI-P3 color coverage is about 93%, and BT.2020 reaches 70%. This means that colors, despite the low brightness, can look quite vivid and attractive.

The "Film" mode turned out to be the most faithful in terms of compliance with the source material used in our tests. However, like other factory modes, it also had its drawbacks. In both SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish tint. This effect was particularly visible in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that every color was shifted towards warmer tones, which affected color accuracy. A key aspect of the image is also contrast and brightness, which can be evaluated by analyzing gamma charts and the EOTF curve. On the gamma chart, we observed significant deviations – both too high values causing loss of detail in the shadows and too low values leading to a drastic decrease in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

The factory color reproduction in the Samsung Q7F definitely isn't one of its strong points. In Filmmaker mode, which theoretically should be closest to neutral, the white balance issue is immediately noticeable. There's too much red on the screen, while blue is noticeably lacking. The effects of this are very easy to see – white, instead of being neutral, takes on warm, almost slightly orange tones. Over time, this makes the entire image look somewhat unnatural, and bright areas of the scene can seem unrealistic. The problems become even more apparent in HDR content. The graphs show that the TV has significant errors in the Color Checker palette, which translates to visible inaccuracies in the real image. In practice, this means that colors are not presented as they should be. The Q7F also heavily manipulates brightness; darker elements are overly boosted, causing them to lose their cinematic feel, while bright parts can appear dimmed. As a result, the image seems flattened, and instead of helping to bring out details, contrast only highlights its own limitations. This is particularly frustrating in HDR materials, as every detail matters there. In scenes where a subtle play of light and shadow should be felt, the Q7F either overdoes the brightening or, conversely, suppresses elements that were meant to draw the eye. This causes the image to lose its depth, and instead of cinematic realism, we get more of a simplification effect.

Philips, both in its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as simple as it might seem. We managed to adjust the white balance, improve the gamma, and tune the EOTF curve; however, despite these actions, the deltaE errors were still at a very high level. The main causes are limited coverage of the DCI-P3 color palette and low maximum brightness, which significantly affected the final result. Although the overall presentation looks much better, the design features of the TV did not allow us to achieve spectacular results.

After professional calibration, we managed to bring the Q7F in order – at least in terms of SDR content. The picture in this mode looks really good: the white balance has been set correctly, the colors appear natural, and errors in the color palette have dropped to values that are practically invisible to the eye. The gamma behaves excellently, and the only minor drawback is a slight brightening of smaller elements, which results from the lack of local dimming. For everyday TV watching or standard quality films, the Q7F performs surprisingly well.

It was much more difficult to tame HDR content. Despite adjusting the white balance, the television continues to manipulate brightness significantly, causing scenes to sometimes look unnatural – what was meant to be subtly darker can end up being overly brightened, and bright parts of the image sometimes appear dull. The final effect is better than in the factory settings, but it is evident that the design limitations of the Q7F do not allow for fully utilizing the potential of HDR materials.

In this paragraph, we will look at two functionalities. We will once again take a look at the function responsible for tonal transitions, but we will also check how the television handles image scaling. The option responsible for smooth gradation is the one called "Distortion Reduction." As we established, it quite effectively smooths out the choppiness. However, we must point out two things: we cannot enable it for HDR materials and that it blurs details in films. The tested television cannot boast the best image scaling. There is a noticeable overall blurriness of the image, but, worse, it blurs details. This is particularly visible on the branches and the hair of the model. A characteristic white halo around the character is also noticeable.

Upscaling and digital image processing in the Q7F is a bit of a sine wave. On one hand, we have really nice upscaling – weaker sources look better than one might expect. The image becomes clearer, sharper, and even older movies or terrestrial TV hold up well. Samsung has been strong in this area for years, and the Q7F confirms that. On the other hand… things start to get tricky. The TV has a problem with overscan – part of the image is simply cut off, and it looks rather unrefined. Additionally, we were let down by a feature called "noise reduction," which should improve the smoothness of tonal transitions in weaker materials. In other Samsungs, it works relatively well, but here it practically makes no difference – the banding in gradients remains. It's a bit disappointing because we could have expected more from a model that is aimed at users looking for a display for SDR content.

Philips PUS8359 is not the best choice for watching sports. The lack of even basic motion enhancement features means that the picture in dynamic scenes is not suitably clear. Despite using an IPS panel (43 and 55'), which theoretically should offer better sharpness than VA panel variants, there is no noticeable improvement in terms of motion blur. In fast-moving images, it is clear that the UFO character is distinctly blurred, which indicates that the television does not cope well with maintaining sharpness in dynamic shots.

Motion blur and motion fluidity in the Q7F is probably the most budget-conscious element of this TV. The 60 Hz panel is noticeable, with blur being quite evident, especially in dynamic scenes, and it's rather difficult to consider this model as equipment designed for watching sports or playing fast-paced games. In tests with the little green man, there was a long tail, and the ball in a football match would leave trails behind it.

On the plus side, the presence of motion smoothing is commendable. It really makes a difference in movies - especially since most materials are recorded at 24 frames. Here we can decide for ourselves whether we prefer a more "cinematic" image, with the slight jerkiness characteristic of cinema, or a smoother, more "television-like" one. This actually works quite well and helps improve the viewing comfort for series or movies.

In terms of compatibility with consoles, the Philips PUS8359 is mainly suitable for casual gamers. Although the TV is equipped with an HDMI 2.0 port, it offers features such as Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the TV to low latency mode, facilitating quicker reactions during gameplay, while VRR smoothly adjusts the refresh rate, eliminating the issue of screen tearing. Game Bar provides quick access to game settings and real-time monitoring of parameters; however, in our opinion, it performs worse compared to competitors' solutions.

However, more demanding gamers may feel underwhelmed. The Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the TV's capabilities in delivering smooth and detailed experiences during fast-paced, dynamic gameplay.

Features for gamers in the Samsung Q7F is a topic that evokes quite a bit of mixed emotions. On one hand – no sensible person expected miracles here, after all, it's a 60 Hz television, and it was clear from the beginning that it wouldn't be a device to extract the maximum from a console or PC. On the other hand, since the manufacturer promised specific solutions in promotional materials, it's natural that we wanted to see them in practice. At the start, it's quite decent. The automatic game mode (ALLM) works, so there's no need to manually fiddle with the settings; the console switches the TV to low latency mode by itself. Additionally, we have the Game Bar, which looks impressive and allows you to check a few basic parameters without leaving the game. And this is where the good news ends.

The biggest problem with the Q7F is VRR, or rather its absence. Indeed, a relevant icon appears in the menu, and you can even see it in the Game Bar, but throughout the entire test, the function remained dead and could not be activated in any way. The issue with HGiG is even more painful; this option was actually available at the beginning, but after a software update, it disappeared completely, which is simply unprofessional. Therefore, the Q7F is only suitable for absolute basics. Sure, you can turn on the console, play more mellow titles, and enjoy low input lag, but if someone is counting on more advanced features that the manufacturer promised, they will be disappointed. This is not a television intended for gaming, and it's better to be aware of this before purchasing.