Philips PUS8359 (IPS) vs LG NANO81A / NANO80A

The quality of HDR effect on the Philips PUS8359/12 television is also not impressive. A brightness level of 280 nits is too low, resembling standard SDR more than true HDR, which is clearly visible on the five tested images. Additionally, the television does not impress in terms of color gamut coverage – just 76% DCI-P3 is a result that can be considered weak, especially compared to other models in a similar price range.

If you're counting on HDR in the NANO81A to bring tears to your eyes, I have to disappoint you. This TV is simply too dark to show what this format is really about. With a brightness of just 250 nits, HDR here essentially exists only on paper. In practice, during a viewing session, it's very hard to distinguish whether we're watching high dynamic range content or regular SDR – it simply lacks that "punch" of light in bright areas of the image. But, to not have all criticism, we do have a glimmer of light at the end of the tunnel – and it’s quite clear. It's about color gamut coverage. Here, the NanoCell filter shows that it's not just marketing nonsense. Our measurements indicated that the coverage of the DCI-P3 space is around 88%. This is really a solid result that positions this model significantly above typical budget models based on regular white LED lights without any filters. Of course, it's still a bit lacking compared to the level of quantum dot TVs (QLED) or advanced panels with PFS filtering, but for this price range, the colors are surprisingly saturated and vibrant. It's just a shame that this low brightness doesn’t allow them to fully "spread their wings" with the Nano filter.

The "Film" mode turned out to be the most faithful in terms of compliance with the source material used in our tests. However, like other factory modes, it also had its drawbacks. In both SDR and HDR materials, we noticed issues with white balance, where the dominance of green and red resulted in a yellowish tint. This effect was particularly visible in the form of yellowed whites and unnatural skin tones. The "ColourChecker" palette test showed that every color was shifted towards warmer tones, which affected color accuracy. A key aspect of the image is also contrast and brightness, which can be evaluated by analyzing gamma charts and the EOTF curve. On the gamma chart, we observed significant deviations – both too high values causing loss of detail in the shadows and too low values leading to a drastic decrease in contrast. Compared to gamma, the EOTF curve performed better, only slightly brightening the image, which had a less negative impact on overall quality.

For every movie fan, the natural choice in LG televisions is the Filmmaker Mode. This mode is designed to display the image as the director intended – without unnecessary "enhancements." Unfortunately, in the case of our test unit NANO81A, the factory settings left something to be desired. The main issue turned out to be white balance. Measurements showed a clear deficiency of blue color, which practically translated to many scenes having a slightly yellowish, almost "too yellow" tint. The white was not perfectly clean, which detracted from the freshness of the image. Additionally, brightness management was not ideal either – the factory-set gamma was too low. The image often appeared oversaturated, as if it had been pulled too much from the shadows, losing its naturalness and depth. Fortunately, LG, even in this relatively low price segment, does not block access to advanced settings. The calibration capabilities of this model are immense, which is a big plus for those who like to "dig around" in the menu. We decided to approach the topic in our own way and see how much we could extract from this panel with professional calibration.

Philips, both in its cheaper and more expensive models, offers a wide range of tools for image calibration. We used them to improve the quality of the displayed image, although it was not as simple as it might seem. We managed to adjust the white balance, improve the gamma, and tune the EOTF curve; however, despite these actions, the deltaE errors were still at a very high level. The main causes are limited coverage of the DCI-P3 color palette and low maximum brightness, which significantly affected the final result. Although the overall presentation looks much better, the design features of the TV did not allow us to achieve spectacular results.

After calibrating the NANO81A, it's a completely different television. What LG offers in terms of image enhancement tools even in such an inexpensive model deserves a big plus. We were able to completely eliminate that annoying yellowing of whites and make the colors natural, juicy, and simply "true." In SDR content (such as regular TV, YouTube, or older films), the picture now looks infinitely better – it's clear, well-balanced, and no longer strains the eyes with strange hues. It's evident that this panel has considerable potential, which is simply wasted by poor presets out of the box. However, we have one serious reservation that calibration cannot fully overcome – it's about brightness management in HDR mode. The algorithm LG uses in this model is designed very conservatively. The television deliberately dims the image in HDR to avoid overexposing an already weak black from the IPS panel. The developers faced a choice: either provide more light and accept that black will turn light gray, or reduce the brightness to maintain any contrast. They chose the latter. Nevertheless, after our adjustments, watching anything on the NANO81 is significantly better.

In this paragraph, we will look at two functionalities. We will once again take a look at the function responsible for tonal transitions, but we will also check how the television handles image scaling. The option responsible for smooth gradation is the one called "Distortion Reduction." As we established, it quite effectively smooths out the choppiness. However, we must point out two things: we cannot enable it for HDR materials and that it blurs details in films. The tested television cannot boast the best image scaling. There is a noticeable overall blurriness of the image, but, worse, it blurs details. This is particularly visible on the branches and the hair of the model. A characteristic white halo around the character is also noticeable.

It often happens that cheap 4K panels mercilessly bring all the "dirt" and imperfections of lower resolution materials to light. However, in the case of the LG NANO81A, the situation is quite different. It’s a really solid performer when it comes to handling content that is far from ideal. The built-in processor does a great job with upscaling. Even older recordings look quite decent on this screen – the image is coherent, cleaned of digital noise, and simply pleasant to the eye. A big plus is the gradation reduction feature that you will find in the settings. It is exceptionally effective in combating color banding, which is a lifesaver when watching low bitrate materials, for example from some streaming services or older files from the internet. However, it is worth maintaining a certain vigilance. Since we are dealing with a less efficient chip than in LG's top models here, too aggressive an adjustment of this option can sometimes result in minor artifacts or a slight blurring of details. Despite this risk, I definitely encourage experimentation with this feature – in many cases, it can save the viewing experience and make low-quality material fully watchable.

Philips PUS8359 is not the best choice for watching sports. The lack of even basic motion enhancement features means that the picture in dynamic scenes is not suitably clear. Despite using an IPS panel (43 and 55'), which theoretically should offer better sharpness than VA panel variants, there is no noticeable improvement in terms of motion blur. In fast-moving images, it is clear that the UFO character is distinctly blurred, which indicates that the television does not cope well with maintaining sharpness in dynamic shots.

In terms of motion fluidity, the NANO81A unfortunately has a few drawbacks. The TV is based on a panel with a refresh rate of 60 Hz. If you're looking for perfect sharpness in dynamic football matches or fast-paced action games, you might feel somewhat unsatisfied. With such a low native refresh rate, fast-moving objects on the screen will always be a bit blurry.

In terms of compatibility with consoles, the Philips PUS8359 is mainly suitable for casual gamers. Although the TV is equipped with an HDMI 2.0 port, it offers features such as Auto Low Latency Mode (ALLM), Variable Refresh Rate (VRR), and Game Bar. ALLM automatically switches the TV to low latency mode, facilitating quicker reactions during gameplay, while VRR smoothly adjusts the refresh rate, eliminating the issue of screen tearing. Game Bar provides quick access to game settings and real-time monitoring of parameters; however, in our opinion, it performs worse compared to competitors' solutions.

However, more demanding gamers may feel underwhelmed. The Philips PUS8359 does not support advanced HDR formats in games or higher refresh rates, which is due to the use of a 60 Hz panel. These shortcomings limit the TV's capabilities in delivering smooth and detailed experiences during fast-paced, dynamic gameplay.

NANO81A is unfortunately not a device designed for e-sports. The lack of support for a 120 Hz signal is a fact that users planning to purchase this model must simply come to terms with. Nevertheless, LG engineers have worked hard to squeeze the maximum capabilities out of this 60 Hz panel, offering a set of features that genuinely enhance the gaming experience. Above all, the television supports VRR technology (in the range of 48–60 Hz) and ALLM. As a result, the image remains stable and does not "tear," and the device automatically switches to low-latency mode as soon as it detects a signal from the console. Managing these settings is incredibly simple thanks to a dedicated system overlay that allows for a quick overview of parameters without leaving the game. A significant advantage is the support for the HGiG format. This solution is crucial for owners of modern consoles, as it enables the TV to correctly "understand" the intentions of game developers regarding HDR tone mapping. In practice, this helps avoid the effect of "blown out" bright spots, such as clouds or light sources, which unfortunately is a common issue in budget LCD televisions.