Philips PUS8209 vs LG MRGB85B

Unfortunately, this is where the problems begin. A maximum brightness of 280 nits is definitely too low to feel the true HDR effect. In practice, the image resembles standard SDR more, so it's hard to speak of deeper visual experiences. On the plus side, the color gamut coverage is commendable – 91.4% DCI-P3 is a result that will be sufficient for most films. It must also be noted that the image is stable and there are no issues with sudden changes in brightness or colors. Looking at the overall picture, HDR on this TV is more of a formality than an actual added value. If we are looking for true HDR emotions, this model may not meet expectations.

LG MRGB85 offers moderate brightness. On test patterns it reaches about 700 nits, which by itself is a decent result. In actual movie scenes the values are lower and most often fall between 400 and 600 nits. Bright, expansive shots perform best. In scenes with a lot of black the TV noticeably limits luminance, trying to maintain the highest possible contrast. The HDR effect is therefore visible, but it is far from the level offered by more advanced Mini-LED designs. Especially in darker parts of films the limitations of edge-lit backlighting and imprecise local dimming become noticeable again.

HDR Colors

A much stronger suit of the MRGB85 is its colors. The TV covers about 95% of the DCI-P3 color space and 74% of BT.2020, allowing HDR material to look vivid and striking. Colors are well saturated, and the difference compared with basic LCD TVs is clearly visible. It is worth noting, however, that this is not a classic RGB backlight, where each of the three primary colors is generated by a separate diode. Red is produced by a PFS phosphor, which expands the palette and yields more saturated red shades. This solution works well for color reproduction, but it does not change the limitations of dimming itself. The LEDs are not driven independently in the way the series name might suggest... so it turns out that Mini RGB is not the same as Mini-LED RGB!

Philips PUS8209 offers many picture modes, but the best among them, without a doubt, is the Filmmaker mode. Despite its proud name, it has its clear issues. In the case of HD content, the white balance is characterized by a strong dominance of red, causing the image to be significantly warmer than it should be in reality. The brightness characteristic (gamma), although correct in the midtones, has serious problems at the beginning and end of the graph. Drops in the shadows lead to a loss of details in dark areas, and highlights in bright areas make some elements look unnatural.

For high-quality 4K HDR content, the situation reverses. In this case, blue dominates, leading to an effect of artificial image enhancement, reminiscent of unnatural store settings. Such an image looks unappealing and inconsistent with the creators' intentions. An additional problem is the EOTF curve, responsible for brightness in HDR materials. It deviates significantly from the reference chart, making the image appear too dark, robbing the depth and detail of HDR content.

Against this background, the errors in the Color Checker test and deviations in color palette reproduction are exceptionally large, which negatively impacts the overall image quality. The Filmmaker mode, although the best among the available options, requires significant corrections to fully deliver the director's vision.

We tested the TV in Filmmaker Mode, because among the available settings it produced the image closest to the reference. Factory color reproduction was not perfect. The biggest deviations were in the white balance, with too much red and not enough blue, which pushed the picture noticeably toward warmer tones. Whites took on a slightly yellowish cast, and skin tones and bright areas did not always look natural. It wasn’t a flaw that completely ruined the viewing experience, but in a direct comparison with the same screen after calibration the difference was clearly visible.

After calibration, the white balance for HD and 4K content has improved significantly. Although we did not achieve a perfectly flat characteristic, the effect is definitely better than before. The image on the television no longer appears artificially warm or overly cold, which significantly enhances the naturalness of the displayed content. The brightness characteristic (gamma) has also been adjusted - the biggest issues at the beginning and end of the graph have been mitigated. The EOTF curve, which is responsible for brightness in 4K HDR material, has been stabilized, eliminating problems with excessive dimming of the image. In the color palette test, some imperfections can still be seen due to average coverage of a wide color gamut, which is a limitation of the hardware itself. Nevertheless, the final effect is clearly better than before calibration - the image looks more natural and approaches the expectations for the Filmmaker mode.

Calibration primarily corrected the white balance and removed the previously visible warm tint. After the adjustment, whites no longer had a yellow cast and colors became more neutral and natural. The biggest improvement was seen in SDR content, where the picture looked even and much closer to the reference. A similar effect was achieved in HDR. After calibration the picture became more controlled, although not all of the TV's limitations could be eliminated. The biggest issue remained the intense reds, which were not always reproduced with the necessary precision. In practice the MRGB85 handles everyday SDR content very well, but in more demanding HDR material its limitations remain clearly visible.

The television offers a "Distortion Reduction" feature that effectively improves the gradation of tonal transitions, especially when set to the minimum level. Unfortunately, it comes at a price – the feature also smooths out details like the texture of materials. On the plus side, the operation of this option does not negatively affect the film grain, which remains intact.

As for image scaling (upscaling), the television generates a plastic, soft image that generally looks pleasant. However, in the background, one can sometimes notice issues with aliasing on some elements, such as branches or fine details, which can lower the quality of the reception. Despite these minor imperfections, the overall experience of scaling is satisfactory.

Upscaling and digital image processing perform quite well on the LG MRGB85. The Alpha 8 AI 4K Gen7 processor efficiently upscales lower-resolution content, and you can easily disable overscan regardless of the source. The TV also handles compression artifacts fairly well. The "Smooth Gradation" feature can effectively reduce visible banding and tonal unevenness, but it doesn't always work precisely. At higher settings it can smooth over fine details, for example material textures. On the plus side, it doesn't remove film grain. It's safest to use the "Low" or "Medium" setting, which provides the best compromise between artifact reduction and detail retention.

The 60 Hz panel in the Philips PUS8209 is mainly suited for watching movies, but there is also a certain sense of dissatisfaction here. The TV does not offer any motion smoothing feature that would allow adjusting the smoothness of the picture to individual preferences, which may be disappointing for some users.

The LG MRGB85 is equipped with a VA panel with a native 144 Hz refresh rate, so it performs very well in terms of motion smoothness. The TV easily handles 120 Hz content from consoles and higher refresh rates when connected to a PC. That matters not only for gaming but also when watching sports, where camera movement is noticeably smoother than on basic 60 Hz models. There's also the TruMotion system, which lets you set the level of motion smoothing yourself. You can keep a more cinematic motion or increase smoothness, which works well for sports broadcasts and TV shows. The range of adjustment is wide, so you can easily tailor the motion smoothing to your preferences.

The Philips PUS8209 offers basic functions useful for gamers, such as variable refresh rate (VRR), automatic low latency mode (ALLM), and a Game Bar that makes managing settings easier.

Unfortunately, due to the 60 Hz panel, the television will not meet the expectations of more demanding gamers who are counting on higher fluidity and precision of the image. Additionally, this model does not support any HDR mode dedicated to games, such as HGiG or Dolby Vision, which further limits its capabilities in this regard.

When it comes to gaming, the LG MRGB85 performs best by far. The manufacturer didn’t skimp on the feature set and essentially brought the full suite of functions from higher-end TVs to this model. You get three HDMI 2.1 ports with full 48 Gbps bandwidth. Each of them supports 4K 120 Hz from consoles, and when connected to a PC also 4K 144 Hz. So you don’t have to worry about which port to plug your console or PC into, since they all offer the same capabilities.

It also includes VRR, AMD FreeSync Premium, NVIDIA G-Sync Compatible, ALLM, and HGiG. Dolby Vision Gaming is present as well, allowing supported games to use high refresh rates and dynamic HDR simultaneously on Xbox. Rounding it out is Game Optimizer, a handy in-game menu for gamers. Without leaving the game you can change the picture profile, brighten shadow details, or check the current frame rate. In terms of gaming features, the MRGB85 therefore offers almost the same as much more expensive LG models.