Philips PUS8079 vs Sony Bravia 8 (XR80)

The Philips PUS8079 has a maximum brightness of just 202 nits in content with a wide tonal range, which is very low and makes it unsuitable for streaming movies and series in the highest quality. Additionally, using HDR with dynamic metadata doesn’t improve the situation, as the only HDR format available on this model is HDR10+, which is rare and has limited content support. The TV also uses WLED backlighting, which is not optimal and results in only 80% coverage of the DCI-P3 wide colour gamut. This limits the intensity of colours in HDR content.

The Sony Bravia 8 performs commendably in terms of HDR brightness, reaching a peak of 880 nits. This level is sufficient to render lighting effects effectively in most scenes. In tested clips from Life of Pi and Sicario 2, the television demonstrated vibrant, detailed imagery that captured the atmosphere of these films beautifully.

However, challenges arise in scenes with consistently high brightness, such as in The Meg, where the display's limitations become apparent. In these situations, OLED technology can struggle, with brightness levels dropping to around 450 nits, which can be less satisfying when intense illumination is needed throughout a scene. Despite this, the Sony Bravia 8 remains a strong contender, offering excellent DCI-P3 colour gamut coverage and 74% BT.2020 coverage. These attributes result in rich, accurate colours and fine details, enhancing HDR content and providing an enjoyable viewing experience.

The best factory mode for colour reproduction and fidelity to the director's vision on the Philips PUS8079 was the "Film" mode. However, this setting displayed significant discrepancies between the filmmaker's intent and the actual output. In both SDR and HDR materials (with HDR being less affected), the white balance was off, showing a blue tint similar to store displays, rather than pure whites. When it came to SDR materials, gamma was notably lowered, cutting into the already limited contrast and brightening the overall image. The EOTF curve in HDR content also showed a significant drop below the reference line, making HDR materials appear even darker. The colour accuracy in both SDR and HDR modes was poor, with high deltaE values indicating that the colours were far from their intended representation.

The best factory mode on the Sony Bravia 8 television is IMAX Enhanced, offering the most cinematic experience, though it isn't perfectly calibrated. The TV attempts to replicate cinematic settings as accurately as possible, but some issues are evident. Starting with white balance, both for SDR and 4K content, there is a noticeable blue dominance, making the image appear too cold and lacking in natural warmth. Colour Checker tests reveal a shift towards cooler tones, affecting colour accuracy and making the image feel less lifelike.

Regarding brightness and contrast, the gamma shows a significant drop towards the end of the spectrum, meaning dark details may become too shadowed, and bright areas too intense, causing a loss of subtlety and detail. This is particularly noticeable in the sky, as seen in the comparison image. Additionally, the EOTF curve is considerably above the reference value, making bright elements overly intense. As a result, users may experience an unnatural image, with bright parts losing detail and negatively impacting the overall viewing quality.

Fortunately, Philips incorporates advanced image correction tools across its televisions. SDR content benefited the most from these adjustments, with significant improvements in deltaE errors, white balance, and gamma. While the image still isn’t perfect, it is much more watchable, making it easier on the eyes during movie or series viewing. HDR content, however, was more challenging due to the television’s low luminance. While the EOTF curve and white balance improved, the corrections weren’t as effective as with SDR materials. It’s important to note that each unit may have different errors, some larger and some smaller, but the adjustments made were a step in the right direction.

The calibration process of the Sony Bravia 8 television resulted in significant improvements in image quality. The white balance was notably enhanced for both SDR and 4K HDR content, with minimal errors in the middle section of the graph. Gamma calibration was one of the biggest improvements, eliminating previous dips that had impacted brightness stability and the reproduction of detail in dark areas. The EOTF curve was also corrected, making bright elements appear more natural and improving the overall tonal balance.

However, the most attention should be given to colour reproduction, where some issues persist despite calibration. Sony has omitted the CMS system in this model, which would allow for more precise colour control. As a result, the Colour Checker test for 4K content still reveals significant colour inaccuracies. Despite these limitations, calibration is still recommended, as the improvements in brightness and contrast are noticeable and greatly enhance the overall image quality.

Let us revisit the topic of tonal transitions, this time in the context of overall image quality enhancement. As shown in the photo on the left, the gradation improvement feature delivers excellent results. It provides multiple settings, each offering noticeable benefits without softening the film grain effect. Once again, it must be emphasised that this feature is the standout advantage of the tested television.

On the other hand, the television’s performance in image scaling leaves much to be desired. Fine details often appear heavily jagged, with a noticeable white halo around figures. Additionally, the significant artificial sharpening detracts from the overall image quality.

The fluidity of tonal transitions in lower-quality materials on the Bravia 8 is lacking. Unfortunately, the gentle gradation function, which was available in previous models, is missing, which is a significant drawback. The digital noise reduction feature can improve tonal transitions, but it often removes fine details, such as clouds in scenes from The Martian, which may not be to everyone's taste. On the other hand, the digital processing in the Sony XR80 is quite effective. In test scenes, it performed well without noticeable flaws, and the branches in the background remained smooth without jagged edges. This indicates that the Bravia 8 is capable of handling complex low-resolution image details with relative ease.

This paragraph will be notably brief due to the absence of even basic motion-smoothing functionality, which is unsurprising given the device's budget-oriented nature. The VA panel used here is not known for exceptional sharpness and is instead associated with high contrast and slower response times, as confirmed by the matrix analysis results. Photos captured during fast motion reveal typical motion blur for this type of panel. While not ideal, the television could be conditionally suitable for watching sports, though viewers should expect less-than-optimal motion clarity. Additionally, films may exhibit noticeable stuttering due to the lack of any motion-smoothing features, even basic ones.

The Sony Bravia 8 offers a maximum refresh rate of 120 Hz, ensuring smooth viewing of dynamic content such as sports and games, with sharp and fluid motion. For more demanding users, the Sony XR80 features an advanced motion smoothing system, divided into three settings: Smoothness (Film), Smoothness (Camera), and Clarity. The first two settings adjust the level of blur and smoothness, while the Clarity setting will be discussed in more detail below. Each of these parameters can be customised to suit individual preferences, allowing users to fine-tune the settings for the optimal viewing experience.

The Philips PUS8079 provides only basic gaming features, including ALLM, VRR, and a Game Bar. The key highlight is the inclusion of dynamic frequency adjustment, which ensures a smooth image with minimal screen tearing—an impressive offering for this price range.

A notable benefit for gamers is the presence of the Game Bar, allowing adjustments to be made "on the fly" without needing to exit the game. Importantly, this feature retains options found in higher-end models, such as shadow enhancement for improved visibility in darker areas and a colour filter designed to assist gamers with visual impairments.

The Sony Bravia 8 has greatly improved its compatibility with consoles compared to earlier models. It supports variable refresh rate (VRR), which eliminates screen tearing and can sync with graphics cards for smooth visuals. The Auto Low Latency Mode (ALLM) reduces input lag, a crucial feature for fast-paced games. Additionally, Dolby Vision with low latency enhances HDR effects, offering stunning visuals during gameplay.

The Sony XR80 also includes a Game Bar, which provides quick access to settings and monitoring tools during gaming. A notable feature is the option to enable a virtual crosshair on the screen, giving players a potential advantage in shooter games.

However, there are some drawbacks. The TV lacks support for 1440p@120Hz resolution, which would benefit users with less powerful graphics cards. Furthermore, the Sony XR80 has only two HDMI 2.1 ports, one of which is typically used for connecting an audio system via eARC, limiting the number of available ports for next-gen consoles.