Philips PUS8079 vs Samsung S85H

The Philips PUS8079 has a maximum brightness of just 202 nits in content with a wide tonal range, which is very low and makes it unsuitable for streaming movies and series in the highest quality. Additionally, using HDR with dynamic metadata doesn’t improve the situation, as the only HDR format available on this model is HDR10+, which is rare and has limited content support. The TV also uses WLED backlighting, which is not optimal and results in only 80% coverage of the DCI-P3 wide colour gamut. This limits the intensity of colours in HDR content.

Interestingly, the new WOLED SE panel has brought a slight improvement in brightness to the S85 series. In the same movie scenes the previous year's model stayed closer to about 700 nits, while the S85H can reach around 800 nits. Of course this isn't a change that completely transforms the HDR experience, but that extra headroom is noticeable especially with small highlights, reflections, and stronger special effects. Around 800 nits is already a very good result for an entry-level OLED and in most films it's enough for HDR to have the right impact. Bright elements can clearly stand out from perfect black, and that contrast still does most of the heavy lifting here. You should remember the typical limitation of organic technology, though. When a very bright scene covers a large part of the screen, brightness can drop by almost half. This is the result of the panel's protection mechanisms, which limit its power with large bright areas.

Colors

The S85H can produce very pleasant, saturated colors and in most HDR films it looks really good in that respect. We measured roughly 95% DCI-P3 coverage, so the palette most often used in movies is reproduced to a very large degree. Skin tones, greens, and stronger reds still have appropriate intensity, and during normal viewing it's hard to fault them. Only when you look more broadly at BT.2020 do the limitations of the new WOLED SE panel become apparent. Coverage was around 70%, a bit less than in previous-generation WOLEDs and noticeably less than in QD-OLED panels. In films this isn't a major loss, because most productions rarely use such highly saturated colors. You notice it more often in games, where developers are much more likely to employ more intense colors.

The best factory mode for colour reproduction and fidelity to the director's vision on the Philips PUS8079 was the "Film" mode. However, this setting displayed significant discrepancies between the filmmaker's intent and the actual output. In both SDR and HDR materials (with HDR being less affected), the white balance was off, showing a blue tint similar to store displays, rather than pure whites. When it came to SDR materials, gamma was notably lowered, cutting into the already limited contrast and brightening the overall image. The EOTF curve in HDR content also showed a significant drop below the reference line, making HDR materials appear even darker. The colour accuracy in both SDR and HDR modes was poor, with high deltaE values indicating that the colours were far from their intended representation.

To evaluate color we, of course, selected Filmmaker mode, and in SDR our S85H unit was very well calibrated out of the box. The biggest deviation appears in the white balance, where a bit of blue drops out as brightness increases. In practice this means whites and grays have a slightly warmer tint than they should. It's not a major error and during normal viewing it generally isn't very noticeable. Gamma also stays close to the reference value, so the image is neither overly bright nor unnecessarily dim. The S85H's SDR picture quality is therefore very good straight out of the box. A few more imperfections show up in HDR. Here the white balance shifts more as brightness increases, with blue becoming dominant and the red component noticeably lacking. That also leads to larger errors in some colors. These aren't yet distortions that completely change the character of the image, but compared directly with the reference the difference is easier to spot. Overall, Filmmaker mode is a very good starting point before professional calibration.

Fortunately, Philips incorporates advanced image correction tools across its televisions. SDR content benefited the most from these adjustments, with significant improvements in deltaE errors, white balance, and gamma. While the image still isn’t perfect, it is much more watchable, making it easier on the eyes during movie or series viewing. HDR content, however, was more challenging due to the television’s low luminance. While the EOTF curve and white balance improved, the corrections weren’t as effective as with SDR materials. It’s important to note that each unit may have different errors, some larger and some smaller, but the adjustments made were a step in the right direction.

Calibration yields very good results on the S85H. First, the white balance can be set almost perfectly, which removes the slightly too-warm image cast that was visible earlier in SDR. Color reproduction itself also improves significantly; most errors drop to a very low level, and in everyday viewing it's hard to notice any visible inaccuracies. You can also improve a lot in HDR, although some issues remain due to the TV's inherent characteristics. The S85H doesn't always perfectly follow the brightness curve. The darkest areas are slightly boosted, and as you approach the panel's limits you can see small deviations in the brightest highlights. On top of that there's limited coverage of the wider BT.2020 gamut, which no calibration can of course overcome. Despite this, the end result is very good, and after calibration the S85H can deliver a well-tuned, natural image.

Let us revisit the topic of tonal transitions, this time in the context of overall image quality enhancement. As shown in the photo on the left, the gradation improvement feature delivers excellent results. It provides multiple settings, each offering noticeable benefits without softening the film grain effect. Once again, it must be emphasised that this feature is the standout advantage of the tested television.

On the other hand, the television’s performance in image scaling leaves much to be desired. Fine details often appear heavily jagged, with a noticeable white halo around figures. Additionally, the significant artificial sharpening detracts from the overall image quality.

For the S85H, Samsung used the same proprietary NQ4 Gen2 AI processor as in last year’s S85F, and in terms of digital image processing it performs quite well. Upscaling is one of this model’s strengths. Lower-resolution content is well sharpened, edges look natural, and the image doesn’t feel overly artificial. Just bear in mind a common Samsung quirk: at very low resolutions you can’t completely disable overscan, so the TV may slightly crop the left edge of the image. The "noise reduction" function, which smooths weaker tonal transitions, also works very well. The processor can effectively remove posterization and other imperfections visible in lower-quality material. However, you need to be careful with the strength of this feature, because Samsung can be fairly aggressive here. When it’s enabled, along with unwanted artifacts, fine image details such as the texture of skin or clothing can start to disappear.

This paragraph will be notably brief due to the absence of even basic motion-smoothing functionality, which is unsurprising given the device's budget-oriented nature. The VA panel used here is not known for exceptional sharpness and is instead associated with high contrast and slower response times, as confirmed by the matrix analysis results. Photos captured during fast motion reveal typical motion blur for this type of panel. While not ideal, the television could be conditionally suitable for watching sports, though viewers should expect less-than-optimal motion clarity. Additionally, films may exhibit noticeable stuttering due to the lack of any motion-smoothing features, even basic ones.

The S85H uses an OLED panel, so it performs excellently when it comes to motion blur. Pixels respond virtually instantly, so moving objects don’t leave the characteristic ghosting seen on some LCD TVs. This is especially noticeable with sports or fast-paced games, where the image stays very clean even during rapid motion. The panel runs at 120 Hz. That’s more than enough for movies, TV series, sports, or console gaming. It’s a bit of a shame Samsung didn’t include a higher refresh rate aimed at PC gamers, since more and more TVs now offer 144 or even 165 Hz at 4K. However, that doesn’t affect motion perception in films or sports. There’s also the classic motion smoothing feature with two settings, blur reduction and judder reduction. So you can choose whether films should keep their cinematic 24 frames per second or if you prefer to smooth them a bit. The S85H gives you plenty of flexibility here, and the interpolation works well and, with reasonable settings, doesn’t produce too many artifacts.

The Philips PUS8079 provides only basic gaming features, including ALLM, VRR, and a Game Bar. The key highlight is the inclusion of dynamic frequency adjustment, which ensures a smooth image with minimal screen tearing—an impressive offering for this price range.

A notable benefit for gamers is the presence of the Game Bar, allowing adjustments to be made "on the fly" without needing to exit the game. Importantly, this feature retains options found in higher-end models, such as shadow enhancement for improved visibility in darker areas and a colour filter designed to assist gamers with visual impairments.

The Samsung S85H is very well set up for gaming, whether you connect a console or a PC. The manufacturer didn’t skimp on ports and all four HDMI inputs support full HDMI 2.1. That means you can use 4K at 120 Hz, VRR, and ALLM without worrying which input to plug your console into. With several devices that matters, because you don’t have to choose between a console, a PC, or a soundbar connected via eARC. The feature set itself is very comprehensive. The S85H supports VRR, FreeSync, and automatic switching to game mode, and Samsung offers its comprehensive Game Bar, which lets you quickly view key signal parameters and change settings without leaving the game. The only real omission is Dolby Vision, which will matter mainly to Xbox owners. That’s a typical trait of Samsung TVs. Game Motion Plus performs very well and is one of the features that have set Samsung TVs apart for years. It smooths motion in games running at 30 or 60 fps, but does so without as large an increase in input lag as traditional motion smoothing. In practice, with more relaxed games, racing titles, or action games this can really improve perceived motion, especially if you’re sensitive to low framerates.