Philips PUS8079 vs Philips OLED770

The Philips PUS8079 has a maximum brightness of just 202 nits in content with a wide tonal range, which is very low and makes it unsuitable for streaming movies and series in the highest quality. Additionally, using HDR with dynamic metadata doesn’t improve the situation, as the only HDR format available on this model is HDR10+, which is rare and has limited content support. The TV also uses WLED backlighting, which is not optimal and results in only 80% coverage of the DCI-P3 wide colour gamut. This limits the intensity of colours in HDR content.

The Philips OLED770 does not attempt to compete with the brightest OLEDs on the market, and it would actually be hard to expect that, as it is the lowest model in Philips's series for 2025. In our measurements, it achieved a maximum brightness of about 700 nits, which allows for enjoyment of HDR effects in scenes where light appears point-wise – for example, in the flash of headlights or a starry sky. In such moments, the picture can truly impress. However, it is different when there are more bright elements on the screen. The television, like many cheaper OLEDs, limits brightness in those cases, and the entire picture noticeably dims. This was best seen in a scene from the movie The Meg, where the sun rises behind an oil rig – at that point, the brightness dropped to about 250 nits, nearly three times less. The HDR effect remains visually pleasing, but it is worth being aware that this model performs best in scenes with less intense light. Fortunately, the OLED770 has an ace up its sleeve – the coverage of the DCI-P3 color palette is as high as 99%, so colors in movies and games are saturated and very close to what the creator intended to convey.

The best factory mode for colour reproduction and fidelity to the director's vision on the Philips PUS8079 was the "Film" mode. However, this setting displayed significant discrepancies between the filmmaker's intent and the actual output. In both SDR and HDR materials (with HDR being less affected), the white balance was off, showing a blue tint similar to store displays, rather than pure whites. When it came to SDR materials, gamma was notably lowered, cutting into the already limited contrast and brightening the overall image. The EOTF curve in HDR content also showed a significant drop below the reference line, making HDR materials appear even darker. The colour accuracy in both SDR and HDR modes was poor, with high deltaE values indicating that the colours were far from their intended representation.

The first measurements already show that the factory settings of the Philips OLED770 have a lot to improve even in Filmmaker mode. The white balance chart clearly shows a lack of blue, which gives the image a slightly yellowish tint. In practice, the white is not snow-white, but leans towards warmer hues – which some may even like, but from the accuracy perspective, this is a deviation from the norm. The gamma, on the other hand, tends to be on the darker side – the average value is about 2.6 instead of the reference 2.4. In the mid-tones, the image appears muted and more saturated, which may look too "filmic," but takes away some naturalness. However, the biggest issues can be seen in color reproduction. The average error is relatively high, and some colors – especially shades of gray – clearly deviate from what should be seen. In everyday viewing, this means that sometimes colors may look less natural than we would wish.

Fortunately, Philips incorporates advanced image correction tools across its televisions. SDR content benefited the most from these adjustments, with significant improvements in deltaE errors, white balance, and gamma. While the image still isn’t perfect, it is much more watchable, making it easier on the eyes during movie or series viewing. HDR content, however, was more challenging due to the television’s low luminance. While the EOTF curve and white balance improved, the corrections weren’t as effective as with SDR materials. It’s important to note that each unit may have different errors, some larger and some smaller, but the adjustments made were a step in the right direction.

Philips OLED770 has shown signs from the beginning that it houses significant potential, but it was difficult to fully see this in the factory settings. The image was sometimes too warm, and some colors seemed to have lost their naturalness along the way. However, calibration revealed that it is a television very receptive to adjustments – it reacted to every correction and almost immediately unveiled another layer of its capabilities. The white balance was successfully set both in SDR and HDR, eliminating the yellowish glow and presenting a neutral, clear white. Gamma stabilized closer to perfection, allowing midtones to regain their naturalness, and shadows no longer appeared artificially darkened, possibly even with a slight brightening effect. The effect was obvious... Movies are watched with greater ease; the image has cinematic depth, but without the feeling that something is exaggeratedly darkened. However, the most interesting part was the work on colors. Out of the box, the errors were not dramatic but slightly noticeable – skin tones were sometimes too warm, and gray didn’t always have the shade we expected. After calibration, the error values dropped to around 2, and in many cases even below 1. This is a level significantly lower than the threshold of perception for the human eye. In other words, after correction, the colors finally “clicked” into place. Looking at the screen, we had the impression that the television had begun to speak with a full voice. Like an instrument that has finally been well-tuned.

Let us revisit the topic of tonal transitions, this time in the context of overall image quality enhancement. As shown in the photo on the left, the gradation improvement feature delivers excellent results. It provides multiple settings, each offering noticeable benefits without softening the film grain effect. Once again, it must be emphasised that this feature is the standout advantage of the tested television.

On the other hand, the television’s performance in image scaling leaves much to be desired. Fine details often appear heavily jagged, with a noticeable white halo around figures. Additionally, the significant artificial sharpening detracts from the overall image quality.

The problem of the previously mentioned color connections can largely be mitigated by the "distortion reduction" feature, which is an algorithm for smoothing tonal transitions in Philips TVs. It works best at a low setting—effectively eliminating unwanted color bands while not introducing strange artifacts or losing image detail. It's one of those features that is truly worth keeping switched on.

The issue with upscaling is somewhat less favorable. The image from a lower resolution can be too soft, while at the same time, distinctive "jaggies" appear in certain areas. The impression is that the algorithm is trying to reconcile two contradictory directions—smoothing and sharpening—and ultimately hasn't found the golden mean. As a consolation, it's worth noting that the television has no issues with overscan, meaning it doesn't cut off the edges of the image, which sometimes happens with other competing models.

This paragraph will be notably brief due to the absence of even basic motion-smoothing functionality, which is unsurprising given the device's budget-oriented nature. The VA panel used here is not known for exceptional sharpness and is instead associated with high contrast and slower response times, as confirmed by the matrix analysis results. Photos captured during fast motion reveal typical motion blur for this type of panel. While not ideal, the television could be conditionally suitable for watching sports, though viewers should expect less-than-optimal motion clarity. Additionally, films may exhibit noticeable stuttering due to the lack of any motion-smoothing features, even basic ones.

The issue of the panel in the Philips OLED770 is not entirely straightforward. The manufacturer claims a 120 Hz panel, but our measurements showed that the screen can accept a 4K signal even at 144 Hz. This sounds like great news – because who wouldn't want an extra mode for PC gaming at this price? However, the reality turned out to be more complex. With 120 Hz materials, the television behaves like most OLEDs – the picture is absolutely clear, with no trace of ghosting or blurring, making it ideal for both fast-paced games and sports broadcasts. The problem arises only at 144 Hz. Unlike models with official support for that frequency, here we observe the phenomenon of so-called frame skipping. This means that the television is unable to display all frames – some of them are skipped, causing the motion to lose fluidity, and double outlines appear on the screen. The effect resembles the operation of the BFI function, which Philips does not offer in this model anyway.

The Philips PUS8079 provides only basic gaming features, including ALLM, VRR, and a Game Bar. The key highlight is the inclusion of dynamic frequency adjustment, which ensures a smooth image with minimal screen tearing—an impressive offering for this price range.

A notable benefit for gamers is the presence of the Game Bar, allowing adjustments to be made "on the fly" without needing to exit the game. Importantly, this feature retains options found in higher-end models, such as shadow enhancement for improved visibility in darker areas and a colour filter designed to assist gamers with visual impairments.

If someone is looking for a gaming TV, the Philips OLED770 is a candidate that's hard to ignore. The mere fact that we have an OLED here provides a great starting point – perfect blacks and infinite contrast make evening sessions in atmospheric games look like they’ve been pulled straight from the cinema. On top of that, there’s the Ambilight system, which features LEDs on the back of the TV that extend the image onto the wall behind the screen. The effect is such that even regular gameplay in FIFA can look like a small spectacle, and in horror games, the atmosphere becomes really intense. On the technical side, it’s pretty good as well. The Philips OLED770 supports Variable Refresh Rate (VRR) up to 120 Hz, has an automatic low latency mode for gamers (ALLM), and if someone is using an Xbox Series X, they can also count on Dolby Vision support in games. You just need to know that in this mode, input lag is slightly higher than standard, although still at an acceptable level. As a bonus, we get the “Game Bar” panel, which is a special tool strip for gamers. It's not the most conveniently designed solution, but it allows you to check key parameters without leaving the game. In total, this presents a picture of a TV that on one hand has all the most important gaming features, and on the other can add something unique – Ambilight. And it’s this mix of technology and visual effect that makes the OLED770 one of the better screens for gaming in a home environment.