Philips PUS7000 vs Sony BRAVIA 2 II (S25M2)

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is not enough to correctly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a regular SDR recording. Therefore, it's better to stick with the latter format to avoid issues in displaying bright scenes, which you can read about below. The situation is not improved by the fact that this is a classic LCD model without additional layers to enhance colors, such as QLED or PFS. As a result, colors in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

Sony Bravia 2 II is not a very bright TV and unfortunately that is immediately apparent in HDR. In our measurements brightness stayed around 300 to 330 nits, which is definitely too low for the brightest parts of the picture to look truly impressive. In practice HDR here does not differ that much from ordinary SDR. Bright highlights, the sun, or lamps are of course visible, but they lack the intensity you would expect from HDR material. The Bravia 2 II therefore performs much better with regular SDR content, and it is in that use case that its limited brightness will be least noticeable.

Color gamut coverage

Sony Bravia 2 II also doesn't impress when it comes to colors. The TV doesn't use any additional gamut-expanding filter, such as the quantum dots found in QLED TVs or a PFS phosphor layer. In our measurements DCI-P3 coverage was about 78%, and the very wide BT.2020 around 57%. That's definitely too little to talk about truly saturated colors in HDR content. More intense reds, greens, or turquoise hues will simply be less striking than on TVs with an expanded color gamut. The Bravia 2 II therefore fares much better with standard Rec.709, the gamut used for movies, series, and TV in SDR.

We tested the television in movie mode, which theoretically should provide the best and most natural colors. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant deficiencies in displaying red. Poorly tuned white balance and too low saturation of this color cause the image to appear too cool. As a result, one might get the impression that the displayed content is simply lacking in vibrant colors. The situation is exacerbated by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, the Philips menu offers many functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

Out-of-the-box color reproduction in Cinema mode was really good, at least for ordinary SDR material. The Bravia 2 II had a slight tendency to boost reds, so some colors skewed a bit warmer, at times with a faint pinkish tint. However, it wasn't a major fault, and during normal viewing the picture still looked quite natural. There was a bit more going on with image brightness. Looking at the gamma trace, you can see Sony doesn't stick exactly to the reference value. The darkest parts are slightly lifted, while as brightness increases the gamma gradually rises and a larger portion of the image becomes darker than it should. That said, the difference isn't large enough to seriously interfere with everyday viewing. Overall, SDR straight out of the box performs pretty well.

The situation is much worse in HDR. We already mentioned the limited color gamut, but the Bravia 2 II also manipulates image brightness quite aggressively here. The EOTF curve sits below the reference for a large part of the range, which means the TV renders most midtones and brighter parts of the scene darker than the source material intends. Only toward the very end of the range does the curve flatten out, as the panel reaches the limits of its capabilities. Combined with a peak brightness of around 300 nits, this results in HDR that not only lacks punch but can simply look too dim.

After professional calibration, it is clear that the PUS7000 responds well to image adjustments. In this price range, this is not a given. The effects should be assessed in two scenarios, depending on what content we plan to watch. SDR performs the best. After our corrections, the image looks really good. Most color errors fell below level 3, which is the threshold at which distortions typically become visible to the naked eye in measurements. Movies, series, sports, and regular television present themselves naturally, without unpleasant deviations. If someone primarily watches classic channels or streaming in HD quality, the difference after calibration will be noticeable immediately. However, it must be made clear that the PUS7000 is still not a television suitable for sensible HDR, and calibration does not change much here. The reason lies in the hardware: colors remain too undersaturated. The television lacks solutions that expand the color gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot show the intense colors required by HDR. This is most evident in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it results from the design of the backlighting and the panel itself.

Calibration did a lot for the Bravia 2 II, especially with SDR content. Above all, we were able to even out the white balance and tidy up the gamma, which now sticks much closer to reference values. As a result, the picture no longer has the previous pink tint, and the brightness of individual areas is much better balanced. You can also see this in the color errors, which dropped to a very low level after calibration (with minor issues in the most saturated reds).

We also partially tamed the Bravia 2 II in HDR, particularly in how the TV manages image brightness. However, there is one thing no calibration can fix: the panel's inherent limitations. The narrow color gamut means the TV physically cannot reproduce the most saturated colors present in HDR content. On top of that, the IPS panel's low contrast leaves darker scenes veiled by a grayish glow, causing colors to lose some of their depth. So we can improve how the Bravia 2 II uses its capabilities, but unfortunately we can't overcome the panel's fundamental limits.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at a low setting. However, it has a flaw: if the action is too aggressive, it can introduce undesirable artifacts on the screen. It’s a good idea to experiment with this setting to find the sweet spot between a smooth image and detail clarity.

The upscaling, which is the enhancement of lower quality materials to 4K, is adequate. The image after processing is very "soft," which is typical for almost all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu to achieve a more pronounced effect.

Upscaling in the Bravia 2 II performs quite well, and in that respect the TV maintains the standard Sony has accustomed us to. Lower-resolution content is sensibly scaled to 4K, with the image slightly smoothed and without over-sharpening edges. It’s a different story when it comes to improving content with visible compression. That’s handled by the "Digital Noise Reduction" feature, which on the "High" setting can indeed smooth out some ugly tonal banding. The problem is it does so fairly aggressively, removing a lot of fine detail along with the imperfections, including natural film grain. Moreover, when there’s more motion on screen its effectiveness drops significantly and the improvement becomes minimal. So we generally avoided using this feature in everyday viewing.

In this regard, we don't really have any good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually standard, and it's hard to expect more. However, the worst part is that the TV does not have any motion smoothing features. There are no supporting systems for either movies or sports. We have to accept that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, the motion may appear choppy or unclear. We have no way to enable any smoother that would soften this effect.

The Bravia 2 II uses a 60 Hz panel and, given its capabilities, handles motion quite well. However, keep in mind this is a basic panel, and its limitations are already noticeable, especially with sports. The TV cannot interpolate 50/60 fps content to a higher refresh rate, so it can't further improve the sharpness of fast-moving objects. For movies and series, you get a standard motion smoother that can reduce the characteristic judder of material shot at 24 fps.

Although the PUS7000 is not marketed as a gaming TV, it does not perform as poorly in this category as one might expect. While there is no support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has included several important features that genuinely improve the comfort of playing on a console. The most significant of these are VRR and ALLM technologies. VRR is responsible for synchronizing the screen with the number of frames generated by the console. This prevents the image from "tearing" and keeps it consistent even during sudden frame drops in the game. In turn, ALLM is a solution that automatically switches the TV to the lowest latency mode right after detecting a signal from the console. All of these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick overview of current settings and connection status without interrupting gameplay, which is a very convenient solution.

The Bravia 2 II is not a TV particularly well suited for gaming, and the feature list makes that clear pretty quickly. You basically only get automatic low-latency mode (ALLM) and a simple Game Bar where you can view basic signal information and change a few settings. But that's where the list of advantages ends. The TV doesn't support VRR or 120 Hz (not even at lower resolutions), and on top of that it has problems with a proper implementation of the HDR HGIG format. It can, of course, be used for occasional console gaming, and thanks to low input lag controls stay responsive, but if you're mainly looking for a TV for gaming, the Bravia 2 II will simply be a very limited choice.