Philips PUS7000 vs Samsung QN80H

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is not enough to correctly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a regular SDR recording. Therefore, it's better to stick with the latter format to avoid issues in displaying bright scenes, which you can read about below. The situation is not improved by the fact that this is a classic LCD model without additional layers to enhance colors, such as QLED or PFS. As a result, colors in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

Samsung QN80H is without a doubt a bright TV. In synthetic tests it breaks the 1000-nit barrier, which on paper already promises a solid HDR effect. In practice the screen really shows its claws, though it can't fully spread its wings (or its backlight 🤔) in every situation. The best impression comes from bright, expansive shots. Sunlit exteriors or heavily lit scenes look really good on it. Brightness then stays around 700 nits, which gives a noticeable step up in quality over standard SDR. Problems start in dark scenes with small, pinpoint highlights. The QN80H tends to heavily dim them, doing everything it can to protect black levels. On one hand we gain better contrast, on the other... we lose some of the dynamics and the sparkle of fine HDR details. The TV therefore has considerable potential, but the dimming algorithm can be too restrictive.

Color gamut coverage

Colors are good too. The QN80H uses quantum dot technology, and in our measurements it covered 93% of the DCI-P3 space and about 70% of BT.2020. Today those results won't exactly blow anyone away, but in real-world use they're more than enough to deliver vivid, natural-looking images in most movies and TV series. Colors are properly saturated and, after proper tuning, don't look artificial or overly aggressive.

We tested the television in movie mode, which theoretically should provide the best and most natural colors. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant deficiencies in displaying red. Poorly tuned white balance and too low saturation of this color cause the image to appear too cool. As a result, one might get the impression that the displayed content is simply lacking in vibrant colors. The situation is exacerbated by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, the Philips menu offers many functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

The QN80H's factory settings were really good, especially compared with most TVs that come into our tests. Of course, we performed measurements in Filmmaker Mode, and that's the mode we recommend turning on right after the initial setup. In SDR material our unit was set up surprisingly well. The white balance was very even, colors looked natural, and the errors were so small they were hard to spot without measurement equipment. The only weak point was the gamma. In brighter parts of the image the TV brightened them a bit too much, so the picture sometimes lost a little depth. Even so, we'd like most TVs to look this good straight out of the box.

It was a bit worse in HDR. The white balance itself was still set correctly, so the problem wasn't with the colors but with how the QN80H managed image brightness. You could see that immediately on the EOTF chart. The TV brightened large parts of scenes too much, causing the brightest elements to blow out. Interestingly, at the same time very small points were often dimmed too much. As a result some fine detail simply disappeared. So the factory Filmmaker Mode in HDR isn't bad, but it's definitely not as well calibrated as in SDR.

After professional calibration, it is clear that the PUS7000 responds well to image adjustments. In this price range, this is not a given. The effects should be assessed in two scenarios, depending on what content we plan to watch. SDR performs the best. After our corrections, the image looks really good. Most color errors fell below level 3, which is the threshold at which distortions typically become visible to the naked eye in measurements. Movies, series, sports, and regular television present themselves naturally, without unpleasant deviations. If someone primarily watches classic channels or streaming in HD quality, the difference after calibration will be noticeable immediately. However, it must be made clear that the PUS7000 is still not a television suitable for sensible HDR, and calibration does not change much here. The reason lies in the hardware: colors remain too undersaturated. The television lacks solutions that expand the color gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot show the intense colors required by HDR. This is most evident in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it results from the design of the backlighting and the panel itself.

The biggest difference after calibration was in HDR Filmmaker mode. SDR was already very good out of the box, so we didn't have much work to do there. In HDR, however, we managed to tame the way the QN80H handled brightness, as it had been over-brightening most scenes. After calibration the picture is calmer, more natural, and much closer to how a faithful picture should look.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at a low setting. However, it has a flaw: if the action is too aggressive, it can introduce undesirable artifacts on the screen. It’s a good idea to experiment with this setting to find the sweet spot between a smooth image and detail clarity.

The upscaling, which is the enhancement of lower quality materials to 4K, is adequate. The image after processing is very "soft," which is typical for almost all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu to achieve a more pronounced effect.

Digital image processing in the Samsung QN80H is handled by the second-generation NQ4 AI processor. It's a chip we already know from earlier models and it still performs very well, especially with lower-resolution material. The image is effectively upscaled to 4K, but without excessive sharpening and without the feeling that the TV is forcing improvements on the source material.

The "Noise Reduction" feature also proves useful. It can noticeably reduce posterization and visible banding in poorer-quality material, particularly in low-bitrate streaming. However, it's important to remember that it doesn't work without side effects. It can remove some film grain and slightly smooth the image. So with a good-quality source we'd leave this feature off. If, however, banding and uneven tonal transitions bother you more than losing some grain, "Noise Reduction" can be a really useful addition.

In this regard, we don't really have any good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually standard, and it's hard to expect more. However, the worst part is that the TV does not have any motion smoothing features. There are no supporting systems for either movies or sports. We have to accept that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, the motion may appear choppy or unclear. We have no way to enable any smoother that would soften this effect.

Motion blur and motion handling on the QN80H are really good, mainly thanks to the fast panel. In 4K the screen refreshes at up to 144 Hz, and when switched to Full HD and connected to a PC it can reach as high as 240 Hz. That's new for Samsung TVs and a nice bonus for people who want to use the TV for PC gaming as well. We were more interested, however, in how the QN80H performs at 120 Hz, since consoles use that refresh rate. Here it's really good. The panel doesn't have a big problem with the smearing typical of VA panels, and slight trails behind moving objects are mostly visible on dark backgrounds. This is nothing that would interfere with normal sports viewing or gaming. The TV also includes a motion smoothing system that Samsung calls "Image Clarity." You can adjust judder reduction and blur reduction separately, so it's easy to tailor its operation to movies, sports, or your own preferences.

Although the PUS7000 is not marketed as a gaming TV, it does not perform as poorly in this category as one might expect. While there is no support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has included several important features that genuinely improve the comfort of playing on a console. The most significant of these are VRR and ALLM technologies. VRR is responsible for synchronizing the screen with the number of frames generated by the console. This prevents the image from "tearing" and keeps it consistent even during sudden frame drops in the game. In turn, ALLM is a solution that automatically switches the TV to the lowest latency mode right after detecting a signal from the console. All of these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick overview of current settings and connection status without interrupting gameplay, which is a very convenient solution.

Samsung QN80H is a TV that scores very well on gamer-oriented features. The biggest new addition for 2026 is DLG mode, which allows refresh rates up to 240 Hz when the image is switched to Full HD resolution. This option is aimed mainly at PC users, but it also shows that Samsung is still heavily developing the gaming side of its TVs. That’s not the end of the list of advantages. The QN80H has four full-featured HDMI 2.1 ports, which in this price range still isn’t standard. You can therefore connect multiple consoles, a PC, or a soundbar at the same time without worrying which input supports the full picture capabilities. The TV also supports VRR, ALLM, and HGiG, so it’s hard to fault its basic feature set. One downside remains the lack of Dolby Vision, which may matter especially to Xbox Series X owners. That said, it’s not a flaw that rules out the QN80H as a gaming TV. Samsung includes a feature still missing from most manufacturers: its proprietary motion interpolator, Game Motion Plus. It’s a motion interpolator that also works in game mode, allowing you to improve the smoothness of titles running at 30 or 60 frames per second without a drastic increase in input lag. In practice, Game Motion Plus can make a much bigger difference than Dolby’s processing, especially in more demanding games that don’t offer a 60 FPS mode. The image becomes noticeably smoother while controls remain responsive enough. So despite the lack of Dolby Vision, the QN80H is still one of the best-equipped TVs for gamers in its class.