During testing, the Philips PML9009 performed best in the factory "Filmmaker" mode, which we evaluated across both SDR and HDR content. A key characteristic observed in this mode is the EOTF curve’s behaviour in HDR content and gamma settings in SDR, designed to enhance image accuracy. However, the PML9009 presented noticeable issues, particularly with white balance, as a pronounced red dominance created a yellow tint across the entire image. This affected skin tones and white areas, with faces and whites appearing unnaturally warm. The colour shift was confirmed through the "ColourChecker" palette, where colours leaned towards warmer shades.
In the gamma analysis, responsible for image contrast, we noticed considerable inaccuracies early on. Our measured values spiked above the reference, causing dark scenes to lose detail and merge visually up to about 10% screen brightness. Following this, the values dropped below the target line, further degrading contrast—an area already challenging for this model.
In HDR content, the white balance remained similarly flawed, and the EOTF curve also restricted brightness levels, resulting in a dim, muted image. Colour inaccuracies were even more pronounced here, with lower luminance levels causing large deviations from accurate colours, which were clearly visible on the error graph, often exceeding acceptable limits. While aiming for cinematic quality, this mode ultimately fell short in delivering balanced colour and contrast fidelity.
Xiaomi, like many manufacturers, offers a wide range of picture modes. On the S MiniLED, we can find both IMAX Enhanced and Filmmaker. We conducted our tests in Filmmaker mode, which theoretically is supposed to reference the original image, but the reality turned out to be somewhat different.
Let's start with the test of SDR materials. Here, the television had quite a few problems, especially with white balance. The clearly visible dominance of red made the image appear too warm, and all colors gained a reddish tint. This was particularly noticeable in a comparative scene from the Star Wars movie. The brightness characteristics (gamma) also left much to be desired – instead of a smooth transition, we had a real "rollercoaster," with a visible excessive brightening of the screen.
In 4K materials, the situation looked much better. The white balance, while still not perfect, was much more balanced, with a slight dominance of red and blue, but without excessive influence on the overall perception. The EOTF curve (responsible for brightness in HDR) showed some brightening in the brightest parts of the image, which was noticeable, for example, in the test scene from the Pan movie that we described above. These brightening effects can disrupt image precision, but in 4K, the overall effect was much more acceptable than in SDR.
Although the Xiaomi S MiniLED can positively surprise in 4K materials, its factory settings in SDR require significant adjustments, especially in terms of white balance and brightness. It is definitely a television that would benefit from calibration.