Philips PML9009 / 9019 / 9059 vs TCL C655 / C69B (55"-85")

The Philips PML9009 struggles to deliver the highest HDR performance. Scenes with effects around 550 nits don’t provide particularly impressive lighting, though the effects remain stable, an improvement over SDR materials. A notable exception is in Gemini Man, where a flashlight as the sole light source stands out. This is likely due to the absence of large dark areas and the relatively small size of the light source compared to scenes with larger, brighter elements like the sun. While the brightness results in HDR content aren’t quite strong enough to recommend this TV for productions utilising a wide colour gamut, it’s worth mentioning that the model does achieve decent coverage, reaching 93% of the DCI-P3 spectrum.

Overall, the quality of HDR performance in TCL C655 / C69B looks quite promising. The average value in test patterns is around 450 nits, which already allows one to feel the effects of lighting and better image dynamics. However, as mentioned earlier, this effect may be partially suppressed by slight differences in bright and dark colors, resulting from the lack of local dimming technology. However, the DCI-P3 color gamut coverage of 94% deserves high praise, and this is made possible by the use of a quantum dot (QLED) panel. As a result, colors are vibrant and well-reproduced when watching HDR content.

During testing, the Philips PML9009 performed best in the factory "Filmmaker" mode, which we evaluated across both SDR and HDR content. A key characteristic observed in this mode is the EOTF curve’s behaviour in HDR content and gamma settings in SDR, designed to enhance image accuracy. However, the PML9009 presented noticeable issues, particularly with white balance, as a pronounced red dominance created a yellow tint across the entire image. This affected skin tones and white areas, with faces and whites appearing unnaturally warm. The colour shift was confirmed through the "ColourChecker" palette, where colours leaned towards warmer shades.

In the gamma analysis, responsible for image contrast, we noticed considerable inaccuracies early on. Our measured values spiked above the reference, causing dark scenes to lose detail and merge visually up to about 10% screen brightness. Following this, the values dropped below the target line, further degrading contrast—an area already challenging for this model.

In HDR content, the white balance remained similarly flawed, and the EOTF curve also restricted brightness levels, resulting in a dim, muted image. Colour inaccuracies were even more pronounced here, with lower luminance levels causing large deviations from accurate colours, which were clearly visible on the error graph, often exceeding acceptable limits. While aiming for cinematic quality, this mode ultimately fell short in delivering balanced colour and contrast fidelity.

The TCL C655 / C69B television offers a movie mode that has been tested for color reproduction quality. Although this mode is called movie mode, unfortunately, it has quite a few errors that a director would certainly not want to see while recording their work. Starting with image analysis, it's worth looking at the white balance - both in HD and 4K HDR content, the white balance has significant errors. In both cases, the red color dominates, making the colors too warm, and overall it has a pink or yellow tint. This can be seen in the picture below from the movie "Star Wars." The Colour Checker test confirms these errors - the color samples stray into inappropriate shades, affecting the overall color fidelity. A minor issue is the brightness characteristic. However, it is also not free of flaws. The gamma chart shows a strong spike at the beginning, causing the image to be overly bright, and the EOTF curve responsible for brightness in 4K HDR material shows significant fluctuations as well – it is visible how the television tries to maintain proper brightness, but it does not always succeed effectively.

Philips has long provided sophisticated calibration tools, including 2-point and 20-point grayscale adjustments as well as an advanced CMS (Colour Management System). These allow users to make significant improvements, and even those less attentive to image quality will likely notice a positive difference post-calibration. Both SDR and HDR content benefit from this process, notably eliminating the prominent yellow tint caused by an overemphasis on red in the white balance.

For SDR content, although gamma adjustments don’t entirely resolve the loss of detail in dark areas, the overall improvements bring most content to an impressive standard, with minimal, hardly perceptible errors. Colour accuracy is notably enhanced, achieving nearly reference quality with low deltaE errors.

HDR content, however, remains somewhat limited due to the display’s lower brightness capability. While the white balance has largely been corrected, a slight blue tint can occasionally appear. The EOTF curve aligns very well, providing accurate geometry, though colour errors persist due to the limited luminance. This calibration offers a substantial improvement but may still fall short for viewers who expect high brightness levels in HDR.

After calibrating the movie mode of the TCL C655 / C69B television, the white balance has been equalized, and the colors look as they should – which is confirmed by only slight deviations in the Colour Checker test. The gamma is really accurate, which means the television should not have issues with brightness in low-resolution materials. Unfortunately, a similar EOTF characteristic is still visible, which is a natural phenomenon in televisions that do not have local dimming – they simply struggle to “shine” more brightly in a given part of the screen. Despite this structural limitation that cannot be overcome, we recommend adjustments in the settings, as the overall color representation looks really very good.

Given the impressive handling of tonal transitions by the Philips PML9009, one might expect similar success in the image scaling test. However, the results were less than stellar. When upscaling lower-quality images, like those from certain TV programmes or older films, the Philips algorithm tended to blur fine details noticeably, especially in intricate elements like fine branches or a model's hair.

On the other hand, the tonal transition performance remains noteworthy, with the TV offering several levels of smoothing. Even at the lowest setting, it effectively addresses non-smooth transitions in most materials, and crucially, it preserves the film grain effect, maintaining fidelity to the director's vision. However, it’s worth noting that some fine details may still appear slightly softened.

The TCL C655 / C69B television handles tonal transitions in low-quality materials pretty well. The "Gradual Smoothing" feature at a low setting effectively smooths tonal transitions, but at the same time, it blurs important details, such as the texture of objects. On the positive side, it does not negatively affect film grain, allowing for a natural look of the image. As for digital processing, the television adds artificial sharpness, which may appeal to some users who prefer a sharpened image. However, for those who prefer a softer look, this may be a disadvantage. A downside is also that the image has been quite heavily cropped by so-called overscan, which reduces the field of view and cuts off the edges of the image.

The Philips PML9009 has a 120 Hz native refresh rate, a baseline standard for watching sports and an ideal setting for gaming on consoles or PCs. Philips includes an effective motion-enhancement system for users who want to reduce the stutter of 24 fps content or need fluid motion for fast-paced scenes, like in football matches. The dedicated "Smoothness" slider effectively mitigates stuttering, while "Motion Blur Reduction" enhances the sharpness of dynamic content. Each setting produces a noticeable difference, so users can tailor the motion effects to their preferences. Our recommended setup achieves a moderate smoothing effect, avoiding the exaggerated “soap opera” appearance.

Regarding pixel response time, VA panels like this generally fall short compared to OLED or even IPS panels, which can lead to a slight "black halo" trailing behind fast-moving objects. Although not a frequent issue with this TV, the effect can be seen in certain scenes.

The C655 / C69B TV is equipped with a 4K@60 Hz panel, which means it performs best when watching movies and less dynamic content. It also has a "Flicker Reduction" feature that allows for adjusting the fluidity of the image – users can choose whether they prefer smoother motion or a more cinematic, frame-by-frame effect. The TV can also adapt to lower resolutions, such as Full HD and 2K at 120 Hz, which will definitely please gamers by offering a smoother image at the cost of resolution. It is worth noting that this feature is available in sizes from 55"+. Additionally, the largest variant, 98", is equipped with a 144Hz panel with full motion smoothing.

The Philips PML9009, with HDMI 2.1 ports supporting full bandwidth, is thoroughly equipped with gamer-focused features. Core functions like Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) are included, as well as the additional perks of G-Sync and FreeSync compatibility and low-lag HDR Dolby Vision support. All these gaming features activate seamlessly, proving this model’s suitability for gaming. The TV’s HGIG mode, particularly beneficial for gaming, adjusts HDR effects to the television’s capabilities to avoid image dimming and blooming, an advantage given the still limited number of games supporting Dolby Vision.

For added convenience, the PML9009 has a GameBar menu, allowing in-game setting adjustments without needing to exit. This menu includes features like a crosshair option and black level correction, which can enhance the visibility of shadowed areas—ideal for competitive play.

Overall, the Philips PML9009 offers a comprehensive setup for gamers, supporting VRR, ALLM, G-Sync, FreeSync, and HDR Dolby Vision to deliver immersive, high-quality gaming experiences across a wide range of titles.

The television TCL C655 / C69B offers an almost perfect set of features for gamers, supporting all the most important technologies. It has an ALLM feature that automatically switches the television to low latency mode, significantly improving responsiveness and minimizing signal delays, which is particularly important during dynamic gameplay. The VRR feature allows for synchronizing the screen refresh rate with the number of frames generated by the console, eliminating the tearing effect and ensuring smoother gameplay.

The television also supports Dolby Vision in game mode, providing better color reproduction and contrast in games that support this format, and the Game Bar enables quick access to gameplay-related settings such as response time, delay level, and other parameters. Unfortunately, C655 / C69B does not support 4K resolution at 120 Hz (with the exception of the 98" variant), which may be disappointing for more demanding gamers who expect the highest fluidity in high-resolution games. However, if we are willing to forgo 4K, the television offers support for Full HD and 2K at 120 Hz, providing a smoother image and being a great alternative for those who prefer a higher refresh rate at the expense of resolution.