Philips PML9009 / 9019 / 9059 vs TCL A300W NXTVision

The Philips PML9009 struggles to deliver the highest HDR performance. Scenes with effects around 550 nits don’t provide particularly impressive lighting, though the effects remain stable, an improvement over SDR materials. A notable exception is in Gemini Man, where a flashlight as the sole light source stands out. This is likely due to the absence of large dark areas and the relatively small size of the light source compared to scenes with larger, brighter elements like the sun. While the brightness results in HDR content aren’t quite strong enough to recommend this TV for productions utilising a wide colour gamut, it’s worth mentioning that the model does achieve decent coverage, reaching 93% of the DCI-P3 spectrum.

When it comes to brightness, the TCL A300W is definitely the darkest TV among all frame-style models, such as Samsung The Frame or Hisense CanvasTV – and unfortunately, this is immediately noticeable. In our measurements, the peak luminance reached only about 400 nits, and on test film screens, this value dropped to 350 nits. This is definitely too little to feel the true "magic" of bright HDR effects. As a consolation – the TV is equipped with a PFS LED coating (which is something like QLED), which provides very good coverage of a wide color palette, both DCI-P3 and BT.2020. Additionally, there is full support for all popular HDR formats – HDR10, HDR10+, HLG, and Dolby Vision – which somewhat compensates for the shortcomings in brightness and helps improve the overall perception of materials in this quality.

During testing, the Philips PML9009 performed best in the factory "Filmmaker" mode, which we evaluated across both SDR and HDR content. A key characteristic observed in this mode is the EOTF curve’s behaviour in HDR content and gamma settings in SDR, designed to enhance image accuracy. However, the PML9009 presented noticeable issues, particularly with white balance, as a pronounced red dominance created a yellow tint across the entire image. This affected skin tones and white areas, with faces and whites appearing unnaturally warm. The colour shift was confirmed through the "ColourChecker" palette, where colours leaned towards warmer shades.

In the gamma analysis, responsible for image contrast, we noticed considerable inaccuracies early on. Our measured values spiked above the reference, causing dark scenes to lose detail and merge visually up to about 10% screen brightness. Following this, the values dropped below the target line, further degrading contrast—an area already challenging for this model.

In HDR content, the white balance remained similarly flawed, and the EOTF curve also restricted brightness levels, resulting in a dim, muted image. Colour inaccuracies were even more pronounced here, with lower luminance levels causing large deviations from accurate colours, which were clearly visible on the error graph, often exceeding acceptable limits. While aiming for cinematic quality, this mode ultimately fell short in delivering balanced colour and contrast fidelity.

TCL A300 offers several picture modes, but without a doubt, the movie mode performs the best. Unfortunately, although it is the best choice among the available options, it is not free from errors. Both in HD and HDR content, the image has a noticeably too warm tint – leaning slightly towards pink, which is particularly noticeable in snowy scenes. Instead of pure white, we get a pinkish hue that spoils the natural perception of colors.

The brightness management doesn't perform well either. For older HD materials, the image often seems too dark – as confirmed by the inflated gamma value. Conversely, with HDR content, the effect is reversed – the image is overly brightened, which we observed in scenes from the movie Pan. This lack of consistency also affects color reproduction accuracy – a test with the ColorChecker showed that many samples deviate significantly from the reference values.

Fortunately, TCL allows manual adjustment of the settings, so we decided to check how the television would perform after our professional calibration. The effects of this correction are described below.

Philips has long provided sophisticated calibration tools, including 2-point and 20-point grayscale adjustments as well as an advanced CMS (Colour Management System). These allow users to make significant improvements, and even those less attentive to image quality will likely notice a positive difference post-calibration. Both SDR and HDR content benefit from this process, notably eliminating the prominent yellow tint caused by an overemphasis on red in the white balance.

For SDR content, although gamma adjustments don’t entirely resolve the loss of detail in dark areas, the overall improvements bring most content to an impressive standard, with minimal, hardly perceptible errors. Colour accuracy is notably enhanced, achieving nearly reference quality with low deltaE errors.

HDR content, however, remains somewhat limited due to the display’s lower brightness capability. While the white balance has largely been corrected, a slight blue tint can occasionally appear. The EOTF curve aligns very well, providing accurate geometry, though colour errors persist due to the limited luminance. This calibration offers a substantial improvement but may still fall short for viewers who expect high brightness levels in HDR.

After our professional calibration, the TCL A300 literally got a new lease on life. The image is no longer too warm, and the colors finally look the way they should – which was confirmed by the ColorChecker test, where the color samples finally started hitting their marks, at least to some reasonable degree. It was also possible to partially correct the brightness management – the image is now more balanced and less "wobbly" between different types of content. Of course, certain limitations cannot be overcome – a slightly noticeable blooming effect still occurs, but that's a characteristic of the technology, not something that can be eliminated even after professional settings.

Generally: after calibration, the A300 looks significantly better and gains a completely new quality.

Given the impressive handling of tonal transitions by the Philips PML9009, one might expect similar success in the image scaling test. However, the results were less than stellar. When upscaling lower-quality images, like those from certain TV programmes or older films, the Philips algorithm tended to blur fine details noticeably, especially in intricate elements like fine branches or a model's hair.

On the other hand, the tonal transition performance remains noteworthy, with the TV offering several levels of smoothing. Even at the lowest setting, it effectively addresses non-smooth transitions in most materials, and crucially, it preserves the film grain effect, maintaining fidelity to the director's vision. However, it’s worth noting that some fine details may still appear slightly softened.

TCL A300 handles tonal transitions in high-quality films very well, but the question arises – how does it perform with weaker materials? The television is equipped with a tonal transition smoothing feature, but its effectiveness can be described in one word: "random." In one scene it may work and improve the gradation, and when turned off… the effect remains the same. There is a lack of consistency and predictability.

Image scaling is also not one of the A300's strong suits. In the test pattern, the main character actually looked better than on the raw signal, but with thin lines – like fonts or background details – there was noticeable jaggedness and aliasing. On the plus side, the television does not cut off the image and has no issues with overscan, but the overall quality of scaling is rather average.

The Philips PML9009 has a 120 Hz native refresh rate, a baseline standard for watching sports and an ideal setting for gaming on consoles or PCs. Philips includes an effective motion-enhancement system for users who want to reduce the stutter of 24 fps content or need fluid motion for fast-paced scenes, like in football matches. The dedicated "Smoothness" slider effectively mitigates stuttering, while "Motion Blur Reduction" enhances the sharpness of dynamic content. Each setting produces a noticeable difference, so users can tailor the motion effects to their preferences. Our recommended setup achieves a moderate smoothing effect, avoiding the exaggerated “soap opera” appearance.

Regarding pixel response time, VA panels like this generally fall short compared to OLED or even IPS panels, which can lead to a slight "black halo" trailing behind fast-moving objects. Although not a frequent issue with this TV, the effect can be seen in certain scenes.

The TCL A300 is equipped with a 144 Hz panel, which should immediately satisfy practically everyone – both gamers and sports fans. The motion is smooth, and the picture is clear even in fast scenes. Additionally, the television offers a motion enhancement feature called "Motion," where we can find two sliders on a 10-point scale. These allow for adjusting the effect to personal preferences – from a classic, cinematic look with visible frames to a very smooth (though already unnatural) image reminiscent of a soap opera effect. Thanks to this, everyone can find a setting that suits them.

The Philips PML9009, with HDMI 2.1 ports supporting full bandwidth, is thoroughly equipped with gamer-focused features. Core functions like Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) are included, as well as the additional perks of G-Sync and FreeSync compatibility and low-lag HDR Dolby Vision support. All these gaming features activate seamlessly, proving this model’s suitability for gaming. The TV’s HGIG mode, particularly beneficial for gaming, adjusts HDR effects to the television’s capabilities to avoid image dimming and blooming, an advantage given the still limited number of games supporting Dolby Vision.

For added convenience, the PML9009 has a GameBar menu, allowing in-game setting adjustments without needing to exit. This menu includes features like a crosshair option and black level correction, which can enhance the visibility of shadowed areas—ideal for competitive play.

Overall, the Philips PML9009 offers a comprehensive setup for gamers, supporting VRR, ALLM, G-Sync, FreeSync, and HDR Dolby Vision to deliver immersive, high-quality gaming experiences across a wide range of titles.

TCL A300 is a television designed not only to transport us to a digital art museum but also to a full-fledged gaming world. It offers practically everything you would expect from gear for gamers: two HDMI 2.1 ports with full bandwidth, 144 Hz refresh rate, VRR support, and ALLM.

The correct implementation of the HGIG mode is also a plus – something that competing Hisense sometimes struggles with. The television easily handles lower resolutions (e.g., Full HD) while maintaining high refresh rates, which will be appreciated by owners of older consoles or PCs.

In addition, there’s an attractive and clear GameBar that facilitates quick access to settings for gamers. The A300 is truly well-prepared for gaming at the highest level – it's just a shame that issues with motion blur slightly tarnish its overall image as a gaming device.