Philips PML9009 / 9019 / 9059 vs Samsung R85H / R86H

The Philips PML9009 struggles to deliver the highest HDR performance. Scenes with effects around 550 nits don’t provide particularly impressive lighting, though the effects remain stable, an improvement over SDR materials. A notable exception is in Gemini Man, where a flashlight as the sole light source stands out. This is likely due to the absence of large dark areas and the relatively small size of the light source compared to scenes with larger, brighter elements like the sun. While the brightness results in HDR content aren’t quite strong enough to recommend this TV for productions utilising a wide colour gamut, it’s worth mentioning that the model does achieve decent coverage, reaching 93% of the DCI-P3 spectrum.

If it’s about brightness, the R85H performs really well. In most of our test scenes the TV reaches around 800 to 900 nits, and with larger bright elements it can break 1000 nits. These aren't, of course, levels on par with the most expensive Mini-LEDs, but they're more than enough for watching movies and TV series in HDR, and the effect can be quite noticeable. The problem shows up again in more demanding scenes where there's a small bright element on a very dark background. Here the TV can significantly reduce its brightness so it doesn't illuminate too much of the screen. In our measurements such small highlights dropped to around 200 to 250 nits, so you can see that a limited number of local dimming zones combined with the specific behavior of the algorithm has its consequences. Fortunately, it's not something that bothers you all the time. In typical mixed HDR scenes the R85H looks good and can deliver appropriate image dynamics. You just can't expect the same punch from very small points of light as you get with TVs that have many more zones or with OLEDs.

During testing, the Philips PML9009 performed best in the factory "Filmmaker" mode, which we evaluated across both SDR and HDR content. A key characteristic observed in this mode is the EOTF curve’s behaviour in HDR content and gamma settings in SDR, designed to enhance image accuracy. However, the PML9009 presented noticeable issues, particularly with white balance, as a pronounced red dominance created a yellow tint across the entire image. This affected skin tones and white areas, with faces and whites appearing unnaturally warm. The colour shift was confirmed through the "ColourChecker" palette, where colours leaned towards warmer shades.

In the gamma analysis, responsible for image contrast, we noticed considerable inaccuracies early on. Our measured values spiked above the reference, causing dark scenes to lose detail and merge visually up to about 10% screen brightness. Following this, the values dropped below the target line, further degrading contrast—an area already challenging for this model.

In HDR content, the white balance remained similarly flawed, and the EOTF curve also restricted brightness levels, resulting in a dim, muted image. Colour inaccuracies were even more pronounced here, with lower luminance levels causing large deviations from accurate colours, which were clearly visible on the error graph, often exceeding acceptable limits. While aiming for cinematic quality, this mode ultimately fell short in delivering balanced colour and contrast fidelity.

In Filmmaker mode our R85H sample performed adequately in SDR, but a few things immediately showed up in the measurements. In the white balance, as brightness increased more red crept in while blue decreased. As a result, the brighter parts of the image had a slightly too warm tint. On top of that, gamma only held to the target value at the start. It then gradually fell, making most of the image a bit too bright. The combination of the two also affected colors — errors grew especially in the brighter, more saturated samples. It didn’t look bad, but for Filmmaker mode we expected a bit more accuracy. Interestingly, in HDR our unit handled things noticeably better. White balance was much more even and, for most of the range, the individual RGB components stayed close together. Only in the brightest areas did red begin to fall short, causing the white point to shift slightly. The EOTF curve looked very good, tracking the target luminance values across almost the entire range. That doesn’t mean HDR colors were perfect. The ColorChecker still shows some deviations, particularly in some of the more saturated hues, but the errors are clearly smaller than in SDR.

Philips has long provided sophisticated calibration tools, including 2-point and 20-point grayscale adjustments as well as an advanced CMS (Colour Management System). These allow users to make significant improvements, and even those less attentive to image quality will likely notice a positive difference post-calibration. Both SDR and HDR content benefit from this process, notably eliminating the prominent yellow tint caused by an overemphasis on red in the white balance.

For SDR content, although gamma adjustments don’t entirely resolve the loss of detail in dark areas, the overall improvements bring most content to an impressive standard, with minimal, hardly perceptible errors. Colour accuracy is notably enhanced, achieving nearly reference quality with low deltaE errors.

HDR content, however, remains somewhat limited due to the display’s lower brightness capability. While the white balance has largely been corrected, a slight blue tint can occasionally appear. The EOTF curve aligns very well, providing accurate geometry, though colour errors persist due to the limited luminance. This calibration offers a substantial improvement but may still fall short for viewers who expect high brightness levels in HDR.

After calibration the R85H shows it has impressive color reproduction capabilities. It performed best in SDR, where the white balance was brought almost perfectly into line and the gamma stays very close to the target across most of the range. That also translated into very low errors in the ColorChecker, so there's really little to fault here. HDR also shows a clear improvement, although some issues can't be corrected as well. At peak brightness the character of the backlight itself starts to show and the individual components of the white balance begin to diverge. The same goes for the most saturated colors, which don't always land exactly where they should. Despite these limitations, overall the image is significantly more accurate than on the factory settings, and the biggest difference is clearly in SDR. However, there's one thing calibration can't fix. With highly saturated elements, color can subtly bleed onto adjacent bright parts of the image. It's easiest to notice this on white, which can pick up a slight tint from a neighboring hue. It doesn't occur in every scene, but when the content is demanding the effect can be visible. This is more a characteristic of the way the RGB backlight works than an issue with picture settings.

Given the impressive handling of tonal transitions by the Philips PML9009, one might expect similar success in the image scaling test. However, the results were less than stellar. When upscaling lower-quality images, like those from certain TV programmes or older films, the Philips algorithm tended to blur fine details noticeably, especially in intricate elements like fine branches or a model's hair.

On the other hand, the tonal transition performance remains noteworthy, with the TV offering several levels of smoothing. Even at the lowest setting, it effectively addresses non-smooth transitions in most materials, and crucially, it preserves the film grain effect, maintaining fidelity to the director's vision. However, it’s worth noting that some fine details may still appear slightly softened.

In the R85H, image processing is handled by the Micro RGB AI Processor. The name is new, but in terms of upscaling lower-quality content, the TV’s behavior remains very similar to what Samsung has shown before. And that’s not a bad thing, since the company has handled this aspect quite well for years. Low-resolution material is displayed cleanly, edges don’t become overly soft, and the TV doesn’t try to artificially extract details at any cost. The result is simply balanced, and with regular TV or older recordings the R85H performs as you would expect from a Samsung at this level. The only minor drawback is overscan, which can’t be completely turned off at the lowest resolutions. A separate issue is the additional processing of weaker sources. The R85H can smooth posterization and tidy up heavily compressed footage a bit, but it’s worth stressing that it does so relatively aggressively. At stronger "noise reduction" settings it starts removing not only compression artifacts but also fine details and natural film grain. It’s best to use it only when the material actually needs it.

The Philips PML9009 has a 120 Hz native refresh rate, a baseline standard for watching sports and an ideal setting for gaming on consoles or PCs. Philips includes an effective motion-enhancement system for users who want to reduce the stutter of 24 fps content or need fluid motion for fast-paced scenes, like in football matches. The dedicated "Smoothness" slider effectively mitigates stuttering, while "Motion Blur Reduction" enhances the sharpness of dynamic content. Each setting produces a noticeable difference, so users can tailor the motion effects to their preferences. Our recommended setup achieves a moderate smoothing effect, avoiding the exaggerated “soap opera” appearance.

Regarding pixel response time, VA panels like this generally fall short compared to OLED or even IPS panels, which can lead to a slight "black halo" trailing behind fast-moving objects. Although not a frequent issue with this TV, the effect can be seen in certain scenes.

R85H has a 144 Hz panel, so motion is really smooth here. Just remember that the extra hertz above 120 will mainly be used when connected to a PC, so in this category we don't treat them as a particular advantage. For movies and TV, what's more important is that the panel is fast enough to provide access to an advanced motion-smoothing feature, "Motion Clarity", which lets us set motion from more film-like to very smooth. The panel's response time is a bit weaker. Because this is a VA panel, fast-moving objects can leave a slight trail. On bright backgrounds that's not very noticeable, but the darker the scene, the more visible the smearing becomes. That's a typical characteristic of this type of panel, and it's easiest to spot in dark scenes.

The Philips PML9009, with HDMI 2.1 ports supporting full bandwidth, is thoroughly equipped with gamer-focused features. Core functions like Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) are included, as well as the additional perks of G-Sync and FreeSync compatibility and low-lag HDR Dolby Vision support. All these gaming features activate seamlessly, proving this model’s suitability for gaming. The TV’s HGIG mode, particularly beneficial for gaming, adjusts HDR effects to the television’s capabilities to avoid image dimming and blooming, an advantage given the still limited number of games supporting Dolby Vision.

For added convenience, the PML9009 has a GameBar menu, allowing in-game setting adjustments without needing to exit. This menu includes features like a crosshair option and black level correction, which can enhance the visibility of shadowed areas—ideal for competitive play.

Overall, the Philips PML9009 offers a comprehensive setup for gamers, supporting VRR, ALLM, G-Sync, FreeSync, and HDR Dolby Vision to deliver immersive, high-quality gaming experiences across a wide range of titles.

Samsung has been steadily expanding its gamer-focused features for several years, and the R85H really lacks nothing important in that area. The TV supports 4K at 120 Hz, VRR and ALLM, so you can easily take advantage of the capabilities of the PlayStation 5 or Xbox Series X. HGiG also works correctly, so with the right HDR settings on the console games retain proper brightness and you don't unnecessarily lose detail in the brightest parts of the image. The only major omission is Dolby Vision Gaming, which Samsung doesn't support on any of its TVs.

Game Bar is also very useful, a handy menu you can bring up without leaving the game. You can quickly check the frame rate, VRR operation, or change the most important picture-related settings. Samsung also adds a few less obvious features, such as the ability to change the aspect ratio or Game Motion Plus, which can further smooth games running at 30 or 60 fps. Of course, this comes at the cost of higher input lag (around 55 ms), but for slower-paced titles it may be an interesting option for some players.