Philips PML9009 / 9019 / 9059 vs Samsung QN900F

The Philips PML9009 struggles to deliver the highest HDR performance. Scenes with effects around 550 nits don’t provide particularly impressive lighting, though the effects remain stable, an improvement over SDR materials. A notable exception is in Gemini Man, where a flashlight as the sole light source stands out. This is likely due to the absence of large dark areas and the relatively small size of the light source compared to scenes with larger, brighter elements like the sun. While the brightness results in HDR content aren’t quite strong enough to recommend this TV for productions utilising a wide colour gamut, it’s worth mentioning that the model does achieve decent coverage, reaching 93% of the DCI-P3 spectrum.

QN900F is really a bright TV – it can generate nearly 2000 nits, which is a value that remains unattainable for most models available on the market. But the mere ability to achieve such brightness is not everything – it also matters whether the TV can use it well. And this is not always perfect. Our tests on movie scenes showed that in scenes such as those from Life of Pi or The Meg, the QN900F can truly shine – literally and figuratively. In such moments, its greatest advantage, which is brightness, makes a huge impression. However, in more challenging scenes, the issues begin – similar to assessing contrast. When smaller, bright elements appear on the screen, the TV often struggles with the decision: whether to highlight them at the expense of black levels, or perhaps maintain deep black but tone down the brightness. The result of this is situations where, for example, in the movie Sicario 2, the brightness dropped to just 200 nits, making details barely visible. The dimming algorithms could definitely be better for a TV of this class.

During testing, the Philips PML9009 performed best in the factory "Filmmaker" mode, which we evaluated across both SDR and HDR content. A key characteristic observed in this mode is the EOTF curve’s behaviour in HDR content and gamma settings in SDR, designed to enhance image accuracy. However, the PML9009 presented noticeable issues, particularly with white balance, as a pronounced red dominance created a yellow tint across the entire image. This affected skin tones and white areas, with faces and whites appearing unnaturally warm. The colour shift was confirmed through the "ColourChecker" palette, where colours leaned towards warmer shades.

In the gamma analysis, responsible for image contrast, we noticed considerable inaccuracies early on. Our measured values spiked above the reference, causing dark scenes to lose detail and merge visually up to about 10% screen brightness. Following this, the values dropped below the target line, further degrading contrast—an area already challenging for this model.

In HDR content, the white balance remained similarly flawed, and the EOTF curve also restricted brightness levels, resulting in a dim, muted image. Colour inaccuracies were even more pronounced here, with lower luminance levels causing large deviations from accurate colours, which were clearly visible on the error graph, often exceeding acceptable limits. While aiming for cinematic quality, this mode ultimately fell short in delivering balanced colour and contrast fidelity.

Testing the QN900F in Filmmaker mode, one quickly noticed the characteristic features of the image despite the fact that this mode is designed to reflect the director's vision. The white balance was not perfect – the television had noticeable deficiencies in blue color. This made the entire scene take on a warmer tone, as if someone had applied a subtle filter in shades of yellow and orange. In movies where bright shots dominate – for example, scenes in the snow or in strong daylight – this created a slight warming effect, which does not always convey the director's intent. The second noticeable element was brightness management. The QN900F sometimes managed to brighten the image more than necessary. It looked as if the exposure had been slightly "pulled up," causing the scene to lose its naturalness. Shadows were sometimes too shallow, and contrast was slightly weakened. These are not disqualifying errors, but for a television in this price range, it is evident that Filmmaker mode has not been perfected one hundred percent. This is particularly evident when comparing its image to what was visible after screen calibration.

Philips has long provided sophisticated calibration tools, including 2-point and 20-point grayscale adjustments as well as an advanced CMS (Colour Management System). These allow users to make significant improvements, and even those less attentive to image quality will likely notice a positive difference post-calibration. Both SDR and HDR content benefit from this process, notably eliminating the prominent yellow tint caused by an overemphasis on red in the white balance.

For SDR content, although gamma adjustments don’t entirely resolve the loss of detail in dark areas, the overall improvements bring most content to an impressive standard, with minimal, hardly perceptible errors. Colour accuracy is notably enhanced, achieving nearly reference quality with low deltaE errors.

HDR content, however, remains somewhat limited due to the display’s lower brightness capability. While the white balance has largely been corrected, a slight blue tint can occasionally appear. The EOTF curve aligns very well, providing accurate geometry, though colour errors persist due to the limited luminance. This calibration offers a substantial improvement but may still fall short for viewers who expect high brightness levels in HDR.

After calibration, we were able to eliminate the errors in white balance and adjust them to a level that can be considered acceptable. It's not perfect, but definitely better than the factory settings. Most color errors are now within the deltaE 2–3 range, so in practice they shouldn't be noticeable during everyday viewing. The biggest improvement is seen in how the television manages brightness in SDR content. Shadows and details are no longer flattened, giving the image depth and naturalness. When it comes to 4K HDR materials, colors themselves are no longer an issue, but some imperfections of the Mini-LED technology can still be observed. The QN900F tends to dim the smallest bright elements too much, causing them to sometimes disappear from view. However, it should be added that this is a much better solution than boosting the entire screen, which would spoil the contrast. It's more of a characteristic of this technology than a typical flaw, but it's worth keeping in mind. The effects of calibration are really very good.

Given the impressive handling of tonal transitions by the Philips PML9009, one might expect similar success in the image scaling test. However, the results were less than stellar. When upscaling lower-quality images, like those from certain TV programmes or older films, the Philips algorithm tended to blur fine details noticeably, especially in intricate elements like fine branches or a model's hair.

On the other hand, the tonal transition performance remains noteworthy, with the TV offering several levels of smoothing. Even at the lowest setting, it effectively addresses non-smooth transitions in most materials, and crucially, it preserves the film grain effect, maintaining fidelity to the director's vision. However, it’s worth noting that some fine details may still appear slightly softened.

If we would like to eliminate non-fluid tonal transitions that can be annoying, for example while watching YouTube, we can use a feature called noise reduction. It works really effectively – it removes the issues with color blending when we set it to Standard level. However, as with most Samsung televisions, this comes with compromises. Although we did not notice that this feature significantly affects the structure of objects in the image, it unfortunately reacts rather aggressively to film grain. Most people will appreciate this effect – the noise is simply removed – but if someone is looking for an image as close as possible to reference settings, then we definitely recommend turning off this option.

As for scaling, which means handling very low-quality content, the QN900F performs really well. On the test screen with the model, the image looked clear, with only slight aliasing that should not bother most viewers. However, it is worth mentioning one issue – the television has problems with so-called overscan, which can cause older content to be slightly cropped. This can manifest itself, for example, with subtitles disappearing from the bottom of the screen.

The Philips PML9009 has a 120 Hz native refresh rate, a baseline standard for watching sports and an ideal setting for gaming on consoles or PCs. Philips includes an effective motion-enhancement system for users who want to reduce the stutter of 24 fps content or need fluid motion for fast-paced scenes, like in football matches. The dedicated "Smoothness" slider effectively mitigates stuttering, while "Motion Blur Reduction" enhances the sharpness of dynamic content. Each setting produces a noticeable difference, so users can tailor the motion effects to their preferences. Our recommended setup achieves a moderate smoothing effect, avoiding the exaggerated “soap opera” appearance.

Regarding pixel response time, VA panels like this generally fall short compared to OLED or even IPS panels, which can lead to a slight "black halo" trailing behind fast-moving objects. Although not a frequent issue with this TV, the effect can be seen in certain scenes.

There really isn't anything to complain about here – the QN900F looks very good when it comes to motion. Thanks to the 165 Hz panel in 4K, one can confidently say that this TV is suitable for both watching sports and gaming. The motion smoothness feature plays a key role here. It works remarkably well – not only during sports broadcasts, where it can eliminate blurring and image jitter, but also in games, where the animation becomes clearer and smoother. And of course, if someone likes to experiment with movies – they also have that option. At lower settings, there's a slight graininess and filmic character, while at higher settings, it reaches soap opera effect territory. So everyone can adjust the picture to their preferences, and the TV has the power to handle it.

The Philips PML9009, with HDMI 2.1 ports supporting full bandwidth, is thoroughly equipped with gamer-focused features. Core functions like Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) are included, as well as the additional perks of G-Sync and FreeSync compatibility and low-lag HDR Dolby Vision support. All these gaming features activate seamlessly, proving this model’s suitability for gaming. The TV’s HGIG mode, particularly beneficial for gaming, adjusts HDR effects to the television’s capabilities to avoid image dimming and blooming, an advantage given the still limited number of games supporting Dolby Vision.

For added convenience, the PML9009 has a GameBar menu, allowing in-game setting adjustments without needing to exit. This menu includes features like a crosshair option and black level correction, which can enhance the visibility of shadowed areas—ideal for competitive play.

Overall, the Philips PML9009 offers a comprehensive setup for gamers, supporting VRR, ALLM, G-Sync, FreeSync, and HDR Dolby Vision to deliver immersive, high-quality gaming experiences across a wide range of titles.

[UPDATE] We have updated our 2025 Samsung TV reviews following the release of firmware version 1131, which officially restores the essential HGiG (HDR Gaming Interest Group) support.

It is really nice here. The QN900F offers a full set of features that we would expect from a top-tier gaming television – we have VRR, ALLM, Game Bar, and also cloud gaming applications. However, the biggest highlight is the proprietary motion smoothing, which also works in games and – importantly – does not add noticeable delays. This is something we won't find in its other competitors. Unfortunately, there is also something concerning. This year, Samsung has apparently messed something up with its televisions. During the test of the QN900F before its update, it had the HGIG feature, which allowed for perfect adjustment of HDR settings for the console. However, according to our procedures, we always update the equipment to the latest version – to give the manufacturer a chance to fix any shortcomings. And here… it turned out the opposite. After the update, the HGIG feature disappeared from the menu, making the proper configuration of the console for HDR practically impossible. It was supposed to be complete – 165Hz, four HDMI 2.1 ports, a full gaming package… but unfortunately, it turned out to be a little blunder. Such a shame.