Philips PML9009 / 9019 / 9059 vs Philips OLED910

The Philips PML9009 struggles to deliver the highest HDR performance. Scenes with effects around 550 nits don’t provide particularly impressive lighting, though the effects remain stable, an improvement over SDR materials. A notable exception is in Gemini Man, where a flashlight as the sole light source stands out. This is likely due to the absence of large dark areas and the relatively small size of the light source compared to scenes with larger, brighter elements like the sun. While the brightness results in HDR content aren’t quite strong enough to recommend this TV for productions utilising a wide colour gamut, it’s worth mentioning that the model does achieve decent coverage, reaching 93% of the DCI-P3 spectrum.

OLED910 is simply an absurdly bright television for an OLED. All thanks to the new panel from LG Display, the Tandem RGB OLED, which Philips has dubbed its "META OLED." It is this panel that allows for over 2000 nits of brightness in films, which was previously completely unattainable in OLEDs. The way the television handles full-screen scenes drenched in bright light is also commendable. Usually, in OLEDs, brightness drops significantly, but here it remains at an excellent level - around 1400 nits. These are almost reference values, and combined with the great color gamut reproduction at 99% DCI P3 and 82% BT.2020, it gives us an HDR effect that can confidently be called one of the best in the world.

During testing, the Philips PML9009 performed best in the factory "Filmmaker" mode, which we evaluated across both SDR and HDR content. A key characteristic observed in this mode is the EOTF curve’s behaviour in HDR content and gamma settings in SDR, designed to enhance image accuracy. However, the PML9009 presented noticeable issues, particularly with white balance, as a pronounced red dominance created a yellow tint across the entire image. This affected skin tones and white areas, with faces and whites appearing unnaturally warm. The colour shift was confirmed through the "ColourChecker" palette, where colours leaned towards warmer shades.

In the gamma analysis, responsible for image contrast, we noticed considerable inaccuracies early on. Our measured values spiked above the reference, causing dark scenes to lose detail and merge visually up to about 10% screen brightness. Following this, the values dropped below the target line, further degrading contrast—an area already challenging for this model.

In HDR content, the white balance remained similarly flawed, and the EOTF curve also restricted brightness levels, resulting in a dim, muted image. Colour inaccuracies were even more pronounced here, with lower luminance levels causing large deviations from accurate colours, which were clearly visible on the error graph, often exceeding acceptable limits. While aiming for cinematic quality, this mode ultimately fell short in delivering balanced colour and contrast fidelity.

Unfortunately, when it comes to color reproduction right out of the box, the Filmmaker mode on the OLED910 performs poorly. The television overly emphasizes the color blue, and at times it almost looks like a store mode. It gives the impression that the manufacturer hasn't quite calibrated the device properly. The result is that colors look unnatural, and the overall effect resembles a somewhat exaggerated display from a market showcase. HDR content looks much better, where aside from a slight loss of detail in blacks, it's hard to find fault with anything. The problem is that in everyday viewing, it is the SDR materials that matter the most – and on the OLED910, they simply look bad and are far from what we would expect from a television of this class.

Philips has long provided sophisticated calibration tools, including 2-point and 20-point grayscale adjustments as well as an advanced CMS (Colour Management System). These allow users to make significant improvements, and even those less attentive to image quality will likely notice a positive difference post-calibration. Both SDR and HDR content benefit from this process, notably eliminating the prominent yellow tint caused by an overemphasis on red in the white balance.

For SDR content, although gamma adjustments don’t entirely resolve the loss of detail in dark areas, the overall improvements bring most content to an impressive standard, with minimal, hardly perceptible errors. Colour accuracy is notably enhanced, achieving nearly reference quality with low deltaE errors.

HDR content, however, remains somewhat limited due to the display’s lower brightness capability. While the white balance has largely been corrected, a slight blue tint can occasionally appear. The EOTF curve aligns very well, providing accurate geometry, though colour errors persist due to the limited luminance. This calibration offers a substantial improvement but may still fall short for viewers who expect high brightness levels in HDR.

Fortunately, it quickly turned out that it was not the panel that was responsible for the issues, but rather the way Philips had calibrated the OLED910 from the factory. After calibration, the television displayed its full potential, and only then could we see what the new panels produced by LG Display were truly capable of. We primarily corrected the white balance and brightness characteristics, which allowed us to tame the excessive blue and give the image a natural look. The final effect can be described as excellent. Errors on the Color Checker palette rarely exceeded a value of 3, which in practice means an image close to perfection and colors presented in accordance with the creators' intentions. In SDR content, the effect was remarkable, and in HDR, the improvement was even more noticeable – gradients became cleaner, and colors fuller and more believable. After calibration, the OLED910 transformed from a disappointing television into equipment that can easily be called reference-level in terms of color reproduction.

Given the impressive handling of tonal transitions by the Philips PML9009, one might expect similar success in the image scaling test. However, the results were less than stellar. When upscaling lower-quality images, like those from certain TV programmes or older films, the Philips algorithm tended to blur fine details noticeably, especially in intricate elements like fine branches or a model's hair.

On the other hand, the tonal transition performance remains noteworthy, with the TV offering several levels of smoothing. Even at the lowest setting, it effectively addresses non-smooth transitions in most materials, and crucially, it preserves the film grain effect, maintaining fidelity to the director's vision. However, it’s worth noting that some fine details may still appear slightly softened.

The previously visible color artifacts can largely be eliminated thanks to a feature called "distortion reduction." Similar to the OLED820, it's best to set it to a medium level, as it then produces quite decent results – smoothing out unwanted tonal transitions while not taking away too many details from the image. Although there may be times when the effect is a bit too aggressive, it can generally be considered a useful feature for everyday viewing.

As for image scaling, the OLED910 performs really well. The test material with the model had a characteristic soft look typical of Philips – at times even too soft – but the sharpness slider can be adjusted at any moment to tailor the image to personal preferences. It's also worth noting that the TV has no issues with overscan, which still occurs in some competing models. It's a small detail, but it's pleasing because it means that all content, even the oldest, is displayed as it should be.

The Philips PML9009 has a 120 Hz native refresh rate, a baseline standard for watching sports and an ideal setting for gaming on consoles or PCs. Philips includes an effective motion-enhancement system for users who want to reduce the stutter of 24 fps content or need fluid motion for fast-paced scenes, like in football matches. The dedicated "Smoothness" slider effectively mitigates stuttering, while "Motion Blur Reduction" enhances the sharpness of dynamic content. Each setting produces a noticeable difference, so users can tailor the motion effects to their preferences. Our recommended setup achieves a moderate smoothing effect, avoiding the exaggerated “soap opera” appearance.

Regarding pixel response time, VA panels like this generally fall short compared to OLED or even IPS panels, which can lead to a slight "black halo" trailing behind fast-moving objects. Although not a frequent issue with this TV, the effect can be seen in certain scenes.

The OLED910 is a television with a refresh rate of 144 Hz. It's a bit disappointing that Philips didn't choose 165 Hz, because we know that the panel used in it is capable of that. On the other hand, such a bonus would mainly benefit PC gamers, as in everyday use, the most important refresh rate is 120 Hz, which is fully sufficient. Combined with the advantages of an OLED panel – lightning-fast pixel response time and no motion blur, the image is impeccably sharp and fast, even in dynamic action scenes. Kudos also goes to Philips' traditional motion smoother called "Motion Style." We can easily adjust it to our preferences: the "Smoothness" slider is for movies and allows you to choose between a more "frame-like," cinematic character and a smooth, theatrical image. Meanwhile, the "Blur Reduction" slider is for sports; it is worth setting it to the maximum value here to ensure that the image is clear and distinct during very fast shots.

The Philips PML9009, with HDMI 2.1 ports supporting full bandwidth, is thoroughly equipped with gamer-focused features. Core functions like Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) are included, as well as the additional perks of G-Sync and FreeSync compatibility and low-lag HDR Dolby Vision support. All these gaming features activate seamlessly, proving this model’s suitability for gaming. The TV’s HGIG mode, particularly beneficial for gaming, adjusts HDR effects to the television’s capabilities to avoid image dimming and blooming, an advantage given the still limited number of games supporting Dolby Vision.

For added convenience, the PML9009 has a GameBar menu, allowing in-game setting adjustments without needing to exit. This menu includes features like a crosshair option and black level correction, which can enhance the visibility of shadowed areas—ideal for competitive play.

Overall, the Philips PML9009 offers a comprehensive setup for gamers, supporting VRR, ALLM, G-Sync, FreeSync, and HDR Dolby Vision to deliver immersive, high-quality gaming experiences across a wide range of titles.

The OLED910 is excellent for gaming. It supports 144 Hz, so if someone has a powerful PC, they can easily take advantage of that potential. On consoles, 120 Hz is the most important, and everything works perfectly here. There is VRR, an automatic game mode, and even Dolby Vision in games along with an HGiG mode, so we actually get a full package of gaming features. Philips also added a Game Bar, which is a quick menu that shows basic information and allows you to enable a few useful things. It may not look as modern as the competition, but it works and serves its purpose. The only downside is the number of HDMI 2.1 ports. There are only two, which can be somewhat disappointing for a TV in this class. If someone is connecting two consoles and something additional to eARC - like a soundbar (which doesn't make much sense in this model, but we'll discuss that in the sound section), they'll need to figure things out a bit more. Other than that, the OLED910 has everything we expect from a gaming TV.