Philips PML9009 / 9019 / 9059 vs LG NANO81A / NANO80A

The Philips PML9009 struggles to deliver the highest HDR performance. Scenes with effects around 550 nits don’t provide particularly impressive lighting, though the effects remain stable, an improvement over SDR materials. A notable exception is in Gemini Man, where a flashlight as the sole light source stands out. This is likely due to the absence of large dark areas and the relatively small size of the light source compared to scenes with larger, brighter elements like the sun. While the brightness results in HDR content aren’t quite strong enough to recommend this TV for productions utilising a wide colour gamut, it’s worth mentioning that the model does achieve decent coverage, reaching 93% of the DCI-P3 spectrum.

If you're counting on HDR in the NANO81A to bring tears to your eyes, I have to disappoint you. This TV is simply too dark to show what this format is really about. With a brightness of just 250 nits, HDR here essentially exists only on paper. In practice, during a viewing session, it's very hard to distinguish whether we're watching high dynamic range content or regular SDR – it simply lacks that "punch" of light in bright areas of the image. But, to not have all criticism, we do have a glimmer of light at the end of the tunnel – and it’s quite clear. It's about color gamut coverage. Here, the NanoCell filter shows that it's not just marketing nonsense. Our measurements indicated that the coverage of the DCI-P3 space is around 88%. This is really a solid result that positions this model significantly above typical budget models based on regular white LED lights without any filters. Of course, it's still a bit lacking compared to the level of quantum dot TVs (QLED) or advanced panels with PFS filtering, but for this price range, the colors are surprisingly saturated and vibrant. It's just a shame that this low brightness doesn’t allow them to fully "spread their wings" with the Nano filter.

During testing, the Philips PML9009 performed best in the factory "Filmmaker" mode, which we evaluated across both SDR and HDR content. A key characteristic observed in this mode is the EOTF curve’s behaviour in HDR content and gamma settings in SDR, designed to enhance image accuracy. However, the PML9009 presented noticeable issues, particularly with white balance, as a pronounced red dominance created a yellow tint across the entire image. This affected skin tones and white areas, with faces and whites appearing unnaturally warm. The colour shift was confirmed through the "ColourChecker" palette, where colours leaned towards warmer shades.

In the gamma analysis, responsible for image contrast, we noticed considerable inaccuracies early on. Our measured values spiked above the reference, causing dark scenes to lose detail and merge visually up to about 10% screen brightness. Following this, the values dropped below the target line, further degrading contrast—an area already challenging for this model.

In HDR content, the white balance remained similarly flawed, and the EOTF curve also restricted brightness levels, resulting in a dim, muted image. Colour inaccuracies were even more pronounced here, with lower luminance levels causing large deviations from accurate colours, which were clearly visible on the error graph, often exceeding acceptable limits. While aiming for cinematic quality, this mode ultimately fell short in delivering balanced colour and contrast fidelity.

For every movie fan, the natural choice in LG televisions is the Filmmaker Mode. This mode is designed to display the image as the director intended – without unnecessary "enhancements." Unfortunately, in the case of our test unit NANO81A, the factory settings left something to be desired. The main issue turned out to be white balance. Measurements showed a clear deficiency of blue color, which practically translated to many scenes having a slightly yellowish, almost "too yellow" tint. The white was not perfectly clean, which detracted from the freshness of the image. Additionally, brightness management was not ideal either – the factory-set gamma was too low. The image often appeared oversaturated, as if it had been pulled too much from the shadows, losing its naturalness and depth. Fortunately, LG, even in this relatively low price segment, does not block access to advanced settings. The calibration capabilities of this model are immense, which is a big plus for those who like to "dig around" in the menu. We decided to approach the topic in our own way and see how much we could extract from this panel with professional calibration.

Philips has long provided sophisticated calibration tools, including 2-point and 20-point grayscale adjustments as well as an advanced CMS (Colour Management System). These allow users to make significant improvements, and even those less attentive to image quality will likely notice a positive difference post-calibration. Both SDR and HDR content benefit from this process, notably eliminating the prominent yellow tint caused by an overemphasis on red in the white balance.

For SDR content, although gamma adjustments don’t entirely resolve the loss of detail in dark areas, the overall improvements bring most content to an impressive standard, with minimal, hardly perceptible errors. Colour accuracy is notably enhanced, achieving nearly reference quality with low deltaE errors.

HDR content, however, remains somewhat limited due to the display’s lower brightness capability. While the white balance has largely been corrected, a slight blue tint can occasionally appear. The EOTF curve aligns very well, providing accurate geometry, though colour errors persist due to the limited luminance. This calibration offers a substantial improvement but may still fall short for viewers who expect high brightness levels in HDR.

After calibrating the NANO81A, it's a completely different television. What LG offers in terms of image enhancement tools even in such an inexpensive model deserves a big plus. We were able to completely eliminate that annoying yellowing of whites and make the colors natural, juicy, and simply "true." In SDR content (such as regular TV, YouTube, or older films), the picture now looks infinitely better – it's clear, well-balanced, and no longer strains the eyes with strange hues. It's evident that this panel has considerable potential, which is simply wasted by poor presets out of the box. However, we have one serious reservation that calibration cannot fully overcome – it's about brightness management in HDR mode. The algorithm LG uses in this model is designed very conservatively. The television deliberately dims the image in HDR to avoid overexposing an already weak black from the IPS panel. The developers faced a choice: either provide more light and accept that black will turn light gray, or reduce the brightness to maintain any contrast. They chose the latter. Nevertheless, after our adjustments, watching anything on the NANO81 is significantly better.

Given the impressive handling of tonal transitions by the Philips PML9009, one might expect similar success in the image scaling test. However, the results were less than stellar. When upscaling lower-quality images, like those from certain TV programmes or older films, the Philips algorithm tended to blur fine details noticeably, especially in intricate elements like fine branches or a model's hair.

On the other hand, the tonal transition performance remains noteworthy, with the TV offering several levels of smoothing. Even at the lowest setting, it effectively addresses non-smooth transitions in most materials, and crucially, it preserves the film grain effect, maintaining fidelity to the director's vision. However, it’s worth noting that some fine details may still appear slightly softened.

It often happens that cheap 4K panels mercilessly bring all the "dirt" and imperfections of lower resolution materials to light. However, in the case of the LG NANO81A, the situation is quite different. It’s a really solid performer when it comes to handling content that is far from ideal. The built-in processor does a great job with upscaling. Even older recordings look quite decent on this screen – the image is coherent, cleaned of digital noise, and simply pleasant to the eye. A big plus is the gradation reduction feature that you will find in the settings. It is exceptionally effective in combating color banding, which is a lifesaver when watching low bitrate materials, for example from some streaming services or older files from the internet. However, it is worth maintaining a certain vigilance. Since we are dealing with a less efficient chip than in LG's top models here, too aggressive an adjustment of this option can sometimes result in minor artifacts or a slight blurring of details. Despite this risk, I definitely encourage experimentation with this feature – in many cases, it can save the viewing experience and make low-quality material fully watchable.

The Philips PML9009 has a 120 Hz native refresh rate, a baseline standard for watching sports and an ideal setting for gaming on consoles or PCs. Philips includes an effective motion-enhancement system for users who want to reduce the stutter of 24 fps content or need fluid motion for fast-paced scenes, like in football matches. The dedicated "Smoothness" slider effectively mitigates stuttering, while "Motion Blur Reduction" enhances the sharpness of dynamic content. Each setting produces a noticeable difference, so users can tailor the motion effects to their preferences. Our recommended setup achieves a moderate smoothing effect, avoiding the exaggerated “soap opera” appearance.

Regarding pixel response time, VA panels like this generally fall short compared to OLED or even IPS panels, which can lead to a slight "black halo" trailing behind fast-moving objects. Although not a frequent issue with this TV, the effect can be seen in certain scenes.

In terms of motion fluidity, the NANO81A unfortunately has a few drawbacks. The TV is based on a panel with a refresh rate of 60 Hz. If you're looking for perfect sharpness in dynamic football matches or fast-paced action games, you might feel somewhat unsatisfied. With such a low native refresh rate, fast-moving objects on the screen will always be a bit blurry.

The Philips PML9009, with HDMI 2.1 ports supporting full bandwidth, is thoroughly equipped with gamer-focused features. Core functions like Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM) are included, as well as the additional perks of G-Sync and FreeSync compatibility and low-lag HDR Dolby Vision support. All these gaming features activate seamlessly, proving this model’s suitability for gaming. The TV’s HGIG mode, particularly beneficial for gaming, adjusts HDR effects to the television’s capabilities to avoid image dimming and blooming, an advantage given the still limited number of games supporting Dolby Vision.

For added convenience, the PML9009 has a GameBar menu, allowing in-game setting adjustments without needing to exit. This menu includes features like a crosshair option and black level correction, which can enhance the visibility of shadowed areas—ideal for competitive play.

Overall, the Philips PML9009 offers a comprehensive setup for gamers, supporting VRR, ALLM, G-Sync, FreeSync, and HDR Dolby Vision to deliver immersive, high-quality gaming experiences across a wide range of titles.

NANO81A is unfortunately not a device designed for e-sports. The lack of support for a 120 Hz signal is a fact that users planning to purchase this model must simply come to terms with. Nevertheless, LG engineers have worked hard to squeeze the maximum capabilities out of this 60 Hz panel, offering a set of features that genuinely enhance the gaming experience. Above all, the television supports VRR technology (in the range of 48–60 Hz) and ALLM. As a result, the image remains stable and does not "tear," and the device automatically switches to low-latency mode as soon as it detects a signal from the console. Managing these settings is incredibly simple thanks to a dedicated system overlay that allows for a quick overview of parameters without leaving the game. A significant advantage is the support for the HGiG format. This solution is crucial for owners of modern consoles, as it enables the TV to correctly "understand" the intentions of game developers regarding HDR tone mapping. In practice, this helps avoid the effect of "blown out" bright spots, such as clouds or light sources, which unfortunately is a common issue in budget LCD televisions.