Philips PML8709 vs SONY BRAVIA 3

Looking at the contrast results, we expected that the algorithms responsible for the zones in the Philips PML8709 would be at least decent. However, what we encountered during testing is hard to explain. The maximum brightness we were able to achieve was only 350 nits, which is definitely too low to fully enjoy HDR effects. In practice, the TV barely stands out against an average SDR. The situation becomes even more surprising in the case of test scenes, such as the second one from the movie Life of Pi or Sicario 2. Small light elements reach only 120 nits there, making them practically invisible. Such a level of brightness is completely inadequate to modern HDR standards and significantly diminishes the viewing experience of high-quality content. The only bright spot in this category is the very good coverage of wide color gamuts – 97% DCI-P3 and 83% BT.2020. This ensures that colors are saturated and well reproduced, which can improve the overall viewing experience of HDR materials, even if just a little. However, the lack of appropriate brightness means that even this cannot save the Philips PML8709 in this category.

Bravia 3 does not hide the fact that it belongs to the group of televisions that are rather modest in terms of brightness. Our measurements showed around 370 nits, which is a value balancing on the borderline where one can still speak of any HDR effect. For some, this is an acceptable level; for others, it is rather typical for SDR materials, where spectacular highlights or vivid contrasts are not expected. The impression is that this is not a television for those focused on the highest image quality in demanding film content. However, this does not mean that we won't find any advantages here. Compared to its predecessor, the X75WL, Bravia 3 has gained an additional PFS filter, functioning similarly to solutions known from QLED technology. Thanks to this, the DCI-P3 color gamut has been significantly expanded and reaches over 91 percent, which in practice provides more saturated colors and a more pleasant image texture. As a result, even everyday content looks a bit livelier, and movies and series can surprise with their colorful presentations, despite the limitations in brightness itself.

Although theoretically the Filmmaker mode on the Philips PML8709 should provide natural color reproduction, in reality it resembles a store mode more. In the white balance, both for HD and 4K content, there is a clear dominance of blue. This makes the image appear washed out and cold, which is particularly noticeable in the comparison picture below.

The brightness characteristics also leave much to be desired. Both the gamma and the EOTF curve show excessive screen brightness. As a result, there is a loss of detail in both the brighter and darker parts of the image, which further diminishes its credibility and naturalness. Bright elements appear unnaturally flat and little varied.

These significant problems in white balance and brightness characteristics lead to noticeable color reproduction errors, which can be easily seen in films as well as in the Colour Checker test. The colors are imprecise, affecting the overall image quality and visual experience. The factory settings require substantial improvement to fully enjoy the potential of this television.

We primarily tested the Sony Bravia 3 in movie mode, which immediately proved to be the best choice among the factory settings. The picture is not perfect, but compared to the eco mode that the TV suggests right out of the box, the difference is significant and for the better. In movie mode, one can notice a certain problem—the image seems too warm, which results from a lack of blue in the white balance. Despite this, in SDR content, the final effect can still be considered quite decent and satisfying for everyday viewing. Much more serious errors occur in HDR materials. The Color Checker analysis showed significant deviations, and poor brightness management combined with limited color gamut coverage further exposes the shortcomings of the image in this mode. All of this makes HDR on the Bravia 3 look unconvincing and can spoil the impression left by the quite decent SDR content settings. Fortunately, this is not a situation without a solution. Various errors can be somewhat mitigated, and some can even be completely corrected through professional calibration. Therefore, we decided to check how the TV would perform after such adjustments.

Philips offers advanced image calibration tools in its televisions, which we decided to fully utilize. The effects? While we managed to improve many aspects, it was not without difficulties. White balance was one of the biggest challenges – despite our efforts, it can be called a battle against windmills. We managed to correct it significantly, making the image look much better than in the factory settings, but it is still far from perfect. Particularly in some scenes, a subtle dominance of blue is noticeable, though not as intense as before. We achieved significant improvement in brightness characteristics – gamma now presents itself much more stably. The EOTF curve looks correct at first glance; however, when analyzing film content, it becomes evident that the television has difficulty maintaining the appropriate characteristics. The algorithms "struggle" to adjust brightness, which may result from the limited number of dimming zones that do not always cope with more complex scenes. Overall, the image after calibration looks much more pleasant to the eye – colors are more natural, and errors in color reproduction have been minimized. Although it's still not perfect, the Philips PML8709 now presents itself much better than in the factory settings.

The calibration allowed us to extract significantly more from ChooseTV 3 than we could have expected at the beginning. First and foremost, we managed to address the shortage of blue color, which previously caused a noticeable warming of the image. After a slight adjustment in white balance, most of the errors in Color Checker measurements for SDR content practically disappeared. The shades of white gained a natural quality, and brightness management in gamma stabilized to a level that is nearly perfect, not exceeding the threshold of human eye perception. Therefore, it can be confidently said that in SDR content, after a few tweaks in settings, ChooseTV 3 performs really excellently. HDR content, however, fares much worse, although it is still definitely better than before calibration. The white balance has been corrected, but the limitations of the IPS panel are insurmountable. The lack of local dimming means that even the smallest elements can be overexposed, which immediately stands out. Color-wise, the effect has also improved, although it is far from ideal—many errors still exceed the threshold of four or even five delta E units, meaning they remain visible to the human eye. It was already clear before that ChooseTV 3 is not a television designed to amaze with HDR quality. Nonetheless, it is gratifying that in SDR content, after calibration, the image can look really great, and in this category, the television pleasantly surprised us.

The distortion reduction function in the Philips PML8709 smooths tonal transitions, but its effectiveness leaves much to be desired. We recommend setting this option to "Medium" – at this level, the effect is noticeable but not excessive. Unfortunately, compared to other Philips models, the smoothing effect is less effective, meaning that some tonal transitions may still appear slightly uneven. An additional drawback is that this function also smooths other details, such as material textures like shirts, which can affect image sharpness.

As for image scaling, the television performs very well. The image appears plastic and free of noticeable "jaggies." This effect may appeal to many users, although some may prefer a more pronounced look. Fortunately, the television allows for adjusting the sharpness parameter, enabling us to tailor the image to individual preferences.

Bravia 3 brings something more to the Sony television family than just a common name. It stands out primarily for its ability to improve the quality of weaker materials thanks to the applied processor. Of course, we won't find the advanced XR chip known from more expensive models here, but it must be acknowledged that the image at a lower resolution looked surprisingly good. Scaling worked effectively, and most parts of the screen were free from the typical excessive jagged edges found in budget constructions.

The feature that enhances the fluidity of tonal transitions is also worth noting. In the high setting, it works really well, effectively masking the imperfections of gradation without significant loss of detail. It does happen that the algorithm overly smooths elements that should remain sharp – for example, faces – however, in overall terms, the effect is beneficial. The best results were achieved precisely at the highest setting, and this option could be recommended to those watching lower-quality content.

Philips PML8709 is one of the few models with mini-LED technology on the market that offers a refresh rate of 60 Hz. Although it is not a panel for the most demanding gamers, it should satisfy those who mainly watch movies. The television is equipped with the "Motion Style" feature, which is a motion smoother that allows you to adjust the fluidity of motion according to your preferences – from a more "plastic" appearance to a cinematic aesthetic with clearly visible frames.

The fluidity of motion has never been a strong point of TVs equipped with 60 Hz panels, and the Bravia 3 is no exception. Nevertheless, Sony has added something that might appeal to those who are more sensitive to the way images are displayed. We are talking about the proprietary Motion Flow motion smoother, which offers users a lot of adjustment options. Thanks to it, one can make the image smoother, even theatrical, or stick to a more cinematic style with the characteristic stuttering that many simply associate with the film atmosphere. These features work with content at lower frame rates, such as movies and series recorded at 24 or 30 frames per second, which are the materials we encounter on a daily basis. It is precisely in this area that the motion smoother proves to be one of the most important features in everyday use of the television, and here the Bravia 3 performs really well.

Philips PML8709 is a television aimed more at occasional gamers, mainly due to its 60 Hz panel, which does not meet the expectations of the most demanding users. However, for those who appreciate gameplay at a more measured pace, this model may prove sufficient.

The television offers several gamer-friendly features, such as ALLM (automatic switching to game mode) and VRR (variable refresh rate), which help in displaying images more smoothly without annoying stutters. Moreover, in terms of HDR, we find here the implementation of HGiG, which adjusts the HDR effect to the specifics of games, providing a more natural image in appropriately optimized titles. Unfortunately, there is no support for Dolby Vision mode, which may be felt in games that utilize this format.

A nice addition is the presence of a basic "Game Bar," which allows for quick preview and modification of key settings related to gaming. It's a simple yet helpful feature, especially for those who often change their setup between different types of gameplay. Despite certain limitations, the Philips PML8709 offers a solid set of features for less demanding gamers.

Bravia 3 is not a device for e-sports enthusiasts or fans of late-night marathons with a controller in hand. The lack of 120 Hz refresh rate and HDMI 2.1 ports wraps up the topic before it can even develop. This is a TV for casual gamers who, after work, want to fire up FIFA or racing games, not for someone who measures every frame in a spreadsheet. Nevertheless, Sony has added a few nice extras so it’s not too barren. ALLM works as it should, automatically switching the TV to game mode (low latency). We even find a simple Game Bar here that is clear. However, the biggest curiosity is the PlayStation Portal app. With it, you can launch games from PS5 wirelessly and immediately see them on the TV screen. It sounds great, but it only takes a few minutes to feel significant delays. In our opinion, it’s more of a showcase of capabilities than something usable on a daily basis. If someone really wants to play, it’s better to connect the console with an HDMI cable right away and forget about wireless problems.