Philips PML8709 vs Philips OLED811

Looking at the contrast results, we expected that the algorithms responsible for the zones in the Philips PML8709 would be at least decent. However, what we encountered during testing is hard to explain. The maximum brightness we were able to achieve was only 350 nits, which is definitely too low to fully enjoy HDR effects. In practice, the TV barely stands out against an average SDR. The situation becomes even more surprising in the case of test scenes, such as the second one from the movie Life of Pi or Sicario 2. Small light elements reach only 120 nits there, making them practically invisible. Such a level of brightness is completely inadequate to modern HDR standards and significantly diminishes the viewing experience of high-quality content. The only bright spot in this category is the very good coverage of wide color gamuts – 97% DCI-P3 and 83% BT.2020. This ensures that colors are saturated and well reproduced, which can improve the overall viewing experience of HDR materials, even if just a little. However, the lack of appropriate brightness means that even this cannot save the Philips PML8709 in this category.

Philips OLED811 uses the new generation WOLED EX panels, also found in models like the LG C6 and Samsung S90H. After calibration we measured around 1500 nits, which is a very good result for an OLED TV. You can see it clearly in movies and series. All kinds of light flashes have the right intensity, especially when they appear on a dark background. In such scenes the OLED811 can deliver truly impressive HDR. Of course, that doesn't mean you'll see that peak brightness in every shot. When the screen is filled with a large area of white or a big explosion, brightness falls to around 600 nits. That's still a good result, but those scenes no longer have the same punch as small, bright elements on a dark background. This is a known limitation of OLEDs, and the OLED811 is no exception.

Colors

Aside from HDR brightness, colors also matter, and Philips performs very well here too. It covers almost the entire DCI-P3 gamut, which contains most of the colors used in HDR movies and series. So you get rich reds and lush greens, and while watching it's hard to find major faults in this area. It looks a bit worse with the much wider BT.2020 gamut — its most saturated shades are already beyond the reach of this panel. Added to that is the issue of the white subpixel the WOLED panel uses to help boost brightness. With very bright colors you can see some "whitening": the color is bright but loses some of its saturation. In exactly these situations QD-OLED panels from Samsung Display have the advantage. In most movies and series, however, this won't be something that immediately stands out.

Although theoretically the Filmmaker mode on the Philips PML8709 should provide natural color reproduction, in reality it resembles a store mode more. In the white balance, both for HD and 4K content, there is a clear dominance of blue. This makes the image appear washed out and cold, which is particularly noticeable in the comparison picture below.

The brightness characteristics also leave much to be desired. Both the gamma and the EOTF curve show excessive screen brightness. As a result, there is a loss of detail in both the brighter and darker parts of the image, which further diminishes its credibility and naturalness. Bright elements appear unnaturally flat and little varied.

These significant problems in white balance and brightness characteristics lead to noticeable color reproduction errors, which can be easily seen in films as well as in the Colour Checker test. The colors are imprecise, affecting the overall image quality and visual experience. The factory settings require substantial improvement to fully enjoy the potential of this television.

The movie mode on the Philips OLED811 is sensibly configured right out of the box. Most color errors are minor, both in SDR and HDR, so you can sit down and watch without first adjusting the settings. There are no major inaccuracies that would immediately pull attention away from the film.

It's not perfect, though. The white balance shows a slight deficiency of red compared with green, so whites and grays can have a faint greenish tint. It's not a strong cast, but measurements clearly show it. There are also small brightness deviations in SDR: some areas of the picture are slightly lifted, and the deepest blacks aren't always rendered evenly. In HDR the TV tracks the reference much more closely, although in places it slightly pulls details out of the shadows. These are generally things to refine. The factory movie mode provides a good starting point, and calibration will show how much more you can get out of it.

Philips offers advanced image calibration tools in its televisions, which we decided to fully utilize. The effects? While we managed to improve many aspects, it was not without difficulties. White balance was one of the biggest challenges – despite our efforts, it can be called a battle against windmills. We managed to correct it significantly, making the image look much better than in the factory settings, but it is still far from perfect. Particularly in some scenes, a subtle dominance of blue is noticeable, though not as intense as before. We achieved significant improvement in brightness characteristics – gamma now presents itself much more stably. The EOTF curve looks correct at first glance; however, when analyzing film content, it becomes evident that the television has difficulty maintaining the appropriate characteristics. The algorithms "struggle" to adjust brightness, which may result from the limited number of dimming zones that do not always cope with more complex scenes. Overall, the image after calibration looks much more pleasant to the eye – colors are more natural, and errors in color reproduction have been minimized. Although it's still not perfect, the Philips PML8709 now presents itself much better than in the factory settings.

After calibration the Philips OLED811 produces an image very close to the reference. We managed to even out the white balance and remove the subtle color cast visible in the factory settings. Errors in Color Checker measurements for SDR and HDR dropped to around 1 to 2, and many samples even fall below 1. That's a level at which it's hard to spot differences from the reference image with the naked eye. We also improved the gamma, and only in the brightest whites a slight brightening remains. In HDR the EOTF curve also stays close to the reference, although the TV still tends to slightly boost the brightness of small elements like stars or subtitles. That gives the image a bit of extra glow that shouldn't be there, but otherwise there's little to complain about. It was already good out of the box, and after calibration we managed to refine most of the remaining shortcomings.

The distortion reduction function in the Philips PML8709 smooths tonal transitions, but its effectiveness leaves much to be desired. We recommend setting this option to "Medium" – at this level, the effect is noticeable but not excessive. Unfortunately, compared to other Philips models, the smoothing effect is less effective, meaning that some tonal transitions may still appear slightly uneven. An additional drawback is that this function also smooths other details, such as material textures like shirts, which can affect image sharpness.

As for image scaling, the television performs very well. The image appears plastic and free of noticeable "jaggies." This effect may appeal to many users, although some may prefer a more pronounced look. Fortunately, the television allows for adjusting the sharpness parameter, enabling us to tailor the image to individual preferences.

The OLED811 handles lower-quality content reasonably well, though it's far from perfect. The "Artifact Reduction" feature helps smooth tonal transitions and on the low setting delivers a pretty good result. It doesn't remove banding between shades as effectively as similar solutions from some competitors, but at least it doesn't introduce new artifacts. That's a sensible setting for everyday viewing. Still, there's some disappointment, because the MediaTek Pentonic 800 chip used here can, in other manufacturers' implementations, deal more effectively with heavy compression even at similarly low settings. A lot therefore depends on how each manufacturer uses its capabilities. We have a few more reservations about the 4K upscaling itself. There is plenty of detail, but the overall image looks fairly soft. Edges are heavily smoothed, which robs the picture of some sharpness and clarity. You can partly correct that with the sharpness slider in the menu, though that will just emphasize outlines rather than recover detail. On the plus side, there is no overscan, so even with an SD signal the TV does not crop the edges of the picture.

Philips PML8709 is one of the few models with mini-LED technology on the market that offers a refresh rate of 60 Hz. Although it is not a panel for the most demanding gamers, it should satisfy those who mainly watch movies. The television is equipped with the "Motion Style" feature, which is a motion smoother that allows you to adjust the fluidity of motion according to your preferences – from a more "plastic" appearance to a cinematic aesthetic with clearly visible frames.

In terms of motion handling, the OLED811 performs excellently. At 120 Hz, which is useful for console gaming and watching sports, the image stays clear and moving objects don’t leave noticeable trails. The fast response of OLED pixels helps here; you can see it clearly in the UFO test, even on dark backgrounds. There are also motion-smoothing controls. For movies you can adjust the strength of smoothing to your taste, ranging from preserving a cinematic feel to much smoother motion. A separate motion blur reduction control is useful for fast-paced content like live sports broadcasts.

Philips PML8709 is a television aimed more at occasional gamers, mainly due to its 60 Hz panel, which does not meet the expectations of the most demanding users. However, for those who appreciate gameplay at a more measured pace, this model may prove sufficient.

The television offers several gamer-friendly features, such as ALLM (automatic switching to game mode) and VRR (variable refresh rate), which help in displaying images more smoothly without annoying stutters. Moreover, in terms of HDR, we find here the implementation of HGiG, which adjusts the HDR effect to the specifics of games, providing a more natural image in appropriately optimized titles. Unfortunately, there is no support for Dolby Vision mode, which may be felt in games that utilize this format.

A nice addition is the presence of a basic "Game Bar," which allows for quick preview and modification of key settings related to gaming. It's a simple yet helpful feature, especially for those who often change their setup between different types of gameplay. Despite certain limitations, the Philips PML8709 offers a solid set of features for less demanding gamers.

OLED811 has almost everything you could expect from a gaming TV. It supports 120 Hz at Full HD, 1440p and 4K resolutions, and when connected to a PC can reach 165 Hz. It also has VRR, which helps avoid screen tearing with variable frame rates, and ALLM, which automatically switches to game mode. So you don't have to dig into the settings every time you power up your console.

HGiG also works correctly, so once you enable HDR on the console the TV doesn't apply its own brightness adjustments. There's also a Game Bar that lets you check signal parameters and quickly change settings useful while gaming. The list even includes Dolby Vision for games, but there's a significant catch, which you'll read about below.