Philips PML8709 vs Hisense UR8S

Looking at the contrast results, we expected that the algorithms responsible for the zones in the Philips PML8709 would be at least decent. However, what we encountered during testing is hard to explain. The maximum brightness we were able to achieve was only 350 nits, which is definitely too low to fully enjoy HDR effects. In practice, the TV barely stands out against an average SDR. The situation becomes even more surprising in the case of test scenes, such as the second one from the movie Life of Pi or Sicario 2. Small light elements reach only 120 nits there, making them practically invisible. Such a level of brightness is completely inadequate to modern HDR standards and significantly diminishes the viewing experience of high-quality content. The only bright spot in this category is the very good coverage of wide color gamuts – 97% DCI-P3 and 83% BT.2020. This ensures that colors are saturated and well reproduced, which can improve the overall viewing experience of HDR materials, even if just a little. However, the lack of appropriate brightness means that even this cannot save the Philips PML8709 in this category.

UR8S is a slightly higher-end Mini-LED, so you could expect a lot in terms of brightness. And indeed, on a synthetic test pattern the peak brightness reached around 2200 nits. That's a very good result, but as always what matters more is what the TV does in normal film scenes. Here the results are a bit more uneven. In bright scenes with a lot of light on screen, the UR8S can deliver really strong HDR. Brightness then reaches about 1500 nits, so the image is very intense and has a lot of punch. It's worse with small bright elements on a dark background. The TV noticeably dims them to maintain good blacks and avoid excessive blooming. As a result, things like single stars or tiny specular highlights can be only around 200 nits. And here HDR is no longer as impressive. So the local dimming algorithm works effectively, but it comes at a cost, sometimes it simply sacrifices the brightness of small details too much in favor of contrast.

Colors

With RGB Mini-LED TVs, colors should be evaluated a bit differently than usual. If we look solely at the panel's capabilities, the UR8S performs great. We measured about 94% coverage of BT.2020 and practically full DCI-P3. These are among the highest values currently found in LCD TVs, and this is where the potential of RGB backlighting is most apparent. The problem is that this potential isn't always used in real scenes. When we ran the same measurements on patterns with an overlaid film background, the saturation of some colors dropped noticeably. Individual zones can't always control the three RGB components as precisely when the scene becomes more complex. This is most noticeable with blue and magenta. In simple test patterns they can look very strong, but in tougher scenes samples of those colors clearly shrink. So the UR8S has enormous potential, but the TV can't always make full use of it.

Although theoretically the Filmmaker mode on the Philips PML8709 should provide natural color reproduction, in reality it resembles a store mode more. In the white balance, both for HD and 4K content, there is a clear dominance of blue. This makes the image appear washed out and cold, which is particularly noticeable in the comparison picture below.

The brightness characteristics also leave much to be desired. Both the gamma and the EOTF curve show excessive screen brightness. As a result, there is a loss of detail in both the brighter and darker parts of the image, which further diminishes its credibility and naturalness. Bright elements appear unnaturally flat and little varied.

These significant problems in white balance and brightness characteristics lead to noticeable color reproduction errors, which can be easily seen in films as well as in the Colour Checker test. The colors are imprecise, affecting the overall image quality and visual experience. The factory settings require substantial improvement to fully enjoy the potential of this television.

For evaluating out-of-the-box colors we used Filmmaker mode, which is supposed to show the image as close as possible to how the material was intended. Looking at white balance alone, the UR8S does quite well. There is no strong color cast that immediately jumps out, although as brightness increases a bit too much blue and red appear while green becomes deficient. Color errors therefore show up in measurements, but the image itself does not look bad.

We have far bigger reservations about how the UR8S manages image brightness. In SDR the gamma stays around 1.9 to 2.0 for most of the range instead of the target 2.4. In practice this simply means the image is too bright, especially in the midtones. Shadows are lifted too much, so the image loses some depth. A similar trend is visible in HDR. The EOTF curve sits above the reference value for a large portion of the range, so the UR8S again brightens the image more than it should. This is not a matter of the TV lacking brightness; it has plenty of it. The issue is how it manages that brightness. As a result, HDR material can look very striking, but not always exactly as it should.

Philips offers advanced image calibration tools in its televisions, which we decided to fully utilize. The effects? While we managed to improve many aspects, it was not without difficulties. White balance was one of the biggest challenges – despite our efforts, it can be called a battle against windmills. We managed to correct it significantly, making the image look much better than in the factory settings, but it is still far from perfect. Particularly in some scenes, a subtle dominance of blue is noticeable, though not as intense as before. We achieved significant improvement in brightness characteristics – gamma now presents itself much more stably. The EOTF curve looks correct at first glance; however, when analyzing film content, it becomes evident that the television has difficulty maintaining the appropriate characteristics. The algorithms "struggle" to adjust brightness, which may result from the limited number of dimming zones that do not always cope with more complex scenes. Overall, the image after calibration looks much more pleasant to the eye – colors are more natural, and errors in color reproduction have been minimized. Although it's still not perfect, the Philips PML8709 now presents itself much better than in the factory settings.

Hisense offers quite a few calibration options, and in SDR you can achieve a really good result with them. After calibration, the white balance is practically uniform across the entire range, and color errors drop to very low values. The UR8S can be adjusted very precisely here. HDR looks a bit different. The white balance itself can also be noticeably improved, although at the highest brightness levels larger deviations start to appear. What's most interesting, however, is the behavior of the EOTF curve. Even after it is properly set on test patterns, the UR8S can still interpret brightness its own way during movie playback. Depending on the scene, parts of the image are slightly brightened while others are darkened compared to how they should look. This shows that the algorithms responsible for backlight control have a fairly large impact on the final image. So calibration can greatly improve colors, but we can't completely "turn off" the way the UR8S manages brightness in HDR.

The distortion reduction function in the Philips PML8709 smooths tonal transitions, but its effectiveness leaves much to be desired. We recommend setting this option to "Medium" – at this level, the effect is noticeable but not excessive. Unfortunately, compared to other Philips models, the smoothing effect is less effective, meaning that some tonal transitions may still appear slightly uneven. An additional drawback is that this function also smooths other details, such as material textures like shirts, which can affect image sharpness.

As for image scaling, the television performs very well. The image appears plastic and free of noticeable "jaggies." This effect may appeal to many users, although some may prefer a more pronounced look. Fortunately, the television allows for adjusting the sharpness parameter, enabling us to tailor the image to individual preferences.

A major advantage of the UR8S is its MediaTek Pentonic 800 processor, and digital image processing is one of this model’s strengths. The TV handles smoothing tonal transitions very well, especially with lower-quality sources. The feature responsible for this effect works effectively without overly interfering with the picture. Even at the medium setting it can noticeably reduce visible banding and unevenness without heavily blurring details. Upscaling also performs very well. Lower-resolution content is displayed cleanly, edges look natural, and the image isn’t overly sharpened. The UR8S simply copes very well with weaker signals, and in that respect it’s one of its clear strengths.

Philips PML8709 is one of the few models with mini-LED technology on the market that offers a refresh rate of 60 Hz. Although it is not a panel for the most demanding gamers, it should satisfy those who mainly watch movies. The television is equipped with the "Motion Style" feature, which is a motion smoother that allows you to adjust the fluidity of motion according to your preferences – from a more "plastic" appearance to a cinematic aesthetic with clearly visible frames.

The UR8S is equipped with a panel that has a native 180 Hz refresh rate, so it already offers great potential for smooth motion. The panel itself performs really well, though some limitations typical of VA panels are still visible. Smearing is relatively low for this type of screen, but with faster motion (especially on darker backgrounds) it can still be noticed, particularly when compared with the same image on OLED TVs.

Philips PML8709 is a television aimed more at occasional gamers, mainly due to its 60 Hz panel, which does not meet the expectations of the most demanding users. However, for those who appreciate gameplay at a more measured pace, this model may prove sufficient.

The television offers several gamer-friendly features, such as ALLM (automatic switching to game mode) and VRR (variable refresh rate), which help in displaying images more smoothly without annoying stutters. Moreover, in terms of HDR, we find here the implementation of HGiG, which adjusts the HDR effect to the specifics of games, providing a more natural image in appropriately optimized titles. Unfortunately, there is no support for Dolby Vision mode, which may be felt in games that utilize this format.

A nice addition is the presence of a basic "Game Bar," which allows for quick preview and modification of key settings related to gaming. It's a simple yet helpful feature, especially for those who often change their setup between different types of gameplay. Despite certain limitations, the Philips PML8709 offers a solid set of features for less demanding gamers.

In terms of gamer features the UR8S performs really well. The TV supports practically everything you’d expect from a modern console or PC display. It offers ALLM, VRR, and 4K at 120 Hz. It also supports Dolby Vision in game mode, so when using an Xbox Series X you don’t have to give up that HDR format. PC gamers get even more options. The panel can run at 4K/180 Hz, and dropping to Full HD can raise the refresh rate up to 330 Hz. There’s also a Game Bar that lets you quickly view key information and change gaming-related settings. The only clear shortcoming is a proper implementation of HGiG. With it enabled the TV still interferes with HDR brightness mapping, so we don’t get the effect intended by that standard. Aside from that, the UR8S is very well prepared for both consoles and a powerful PC.