Philips OLED910 vs LG OLED G6 (G64LW, G66LS)

OLED910 is simply an absurdly bright television for an OLED. All thanks to the new panel from LG Display, the Tandem RGB OLED, which Philips has dubbed its "META OLED." It is this panel that allows for over 2000 nits of brightness in films, which was previously completely unattainable in OLEDs. The way the television handles full-screen scenes drenched in bright light is also commendable. Usually, in OLEDs, brightness drops significantly, but here it remains at an excellent level - around 1400 nits. These are almost reference values, and combined with the great color gamut reproduction at 99% DCI P3 and 82% BT.2020, it gives us an HDR effect that can confidently be called one of the best in the world.

The LG G6 is currently one of the brightest OLEDs on the market. Its peak brightness reaches nearly 2500 nits, and best of all – this has a direct impact on real film scenes. The television flawlessly pulls out details in the bright parts of the image. And this is regardless of whether we are talking about very small points like stars in the sky or slightly larger elements on the screen. Naturally, with full-screen, uniformly white scenes, the brightness of the G6 decreases due to the panel's protection system (ABL). However, in real, varied film shots, this value still hovers around 2000 nits, which can be considered an outstanding result. The coverage of the color palette also deserves praise. The new 2nd generation Tandem OLED panel brought only a cosmetic change, but still an improvement. The DCI-P3 color gamut coverage reaches nearly 99.5%, while the ultra-wide BT.2020 is around 84%. These are very good results, although one must remember one thing: at extremely high brightness levels, the volume of colors will be lower than in QD-OLED panels from Samsung Display due to the use of a white sub-pixel (WOLED). However, in everyday content and most films, detecting this difference will be very difficult.

Update 01/2026

After a series of calibrations of the OLED910 model with our customers, we noticed that the measurement results differ from those we obtained during the initial tests. The factory tuning of the movie mode turns out to be significantly better than our first tests indicated. The white balance is set very precisely, with only a minimal red dominance. The factory color reproduction holds close to reference standards – the average Delta E errors hover around 3-4, which is an excellent result for factory settings. However, there is some concern about how the TV manages brightness. Analysis of the Gamma (SDR) and EOTF (HDR) graphs shows a tendency to excessively "pull" details from shadows. In practice, this means that the image can appear overly bright, resulting in a loss of black depth in favor of the visibility of details that should remain hidden. Of course, this effect can be effectively corrected during professional calibration.

Unfortunately, when it comes to color reproduction straight out of the box, in Filmmaker mode, the OLED910 performs really poorly. The TV overexposes the color blue, and at times it looks almost like a store mode. It gives the impression that the manufacturer has not quite tuned the device correctly. The effect is that the colors look unnatural, and the overall impression is somewhat reminiscent of an exaggerated display from a market showcase. HDR content presents itself much better, where aside from a slight loss of details in blacks, it's hard to find anything to complain about. The problem is that for everyday viewing, SDR materials are actually of the greatest importance – and on the OLED910, they simply look bad and fall significantly short of what we would expect from a TV of this class.

We tested the LG G6 in the best factory mode for color fidelity, which is FILMMAKER MODE. For our test unit, this mode was fairly well-tuned right out of the box. In SDR content, the only thing we could nitpick was the white balance, which leaned towards warmer tones. As a result, the image could sometimes appear slightly yellowed; however, overall, it wasn't a bothersome issue. The G6 performed a bit worse with HDR content. There, we noticed too much blue component in the white balance. This caused the image to take on cooler shades, resulting in quite noticeable errors. As can be seen in our ColorChecker chart, colors were indeed shifting towards these cooler registers. Nevertheless, for factory settings, the television displayed a completely decent level. However, we know that OLED screens – especially those from LG – respond wonderfully to professional calibration, which is why we immediately proceeded with it.

Fortunately, it quickly turned out that it was not the panel that was responsible for the issues, but rather the way Philips had calibrated the OLED910 from the factory. After calibration, the television displayed its full potential, and only then could we see what the new panels produced by LG Display were truly capable of. We primarily corrected the white balance and brightness characteristics, which allowed us to tame the excessive blue and give the image a natural look. The final effect can be described as excellent. Errors on the Color Checker palette rarely exceeded a value of 3, which in practice means an image close to perfection and colors presented in accordance with the creators' intentions. In SDR content, the effect was remarkable, and in HDR, the improvement was even more noticeable – gradients became cleaner, and colors fuller and more believable. After calibration, the OLED910 transformed from a disappointing television into equipment that can easily be called reference-level in terms of color reproduction.

After conducting a professional calibration, we gained complete control over the panel, and we were able to adjust all parameters to nearly zero. We managed to perfectly tune the white balance, which made the factory-cool and warm tints disappear from the screen. The effects are clearly evident in the ColorChecker test – the average color reproduction errors dropped below the critical value of 1-2. And what does that mean? PERFECT colors, with no distortion whatsoever! However, from a reviewer's obligation, we must comment on how the LG G6 autonomously manipulates brightness, for which the EOTF curve is responsible. When we look at the standard synthetic graph, it may seem that the line is quite straight. The situation changes, however, when we turn on the measurement filter, which shows how the television interprets brightness in real, moving film scenes (EOTF in MOVIES). At that point, it becomes clear that some of the smallest fragments on the screen are slightly over-brightened by the algorithm. Of course, for the average viewer, such a deviation will be practically unnoticeable, but in the test of such an expensive screen, it is worth noting – especially since we are talking about a model that has huge aspirations to be the best television of the year.

The previously visible color artifacts can largely be eliminated thanks to a feature called "distortion reduction." Similar to the OLED820, it's best to set it to a medium level, as it then produces quite decent results – smoothing out unwanted tonal transitions while not taking away too many details from the image. Although there may be times when the effect is a bit too aggressive, it can generally be considered a useful feature for everyday viewing.

As for image scaling, the OLED910 performs really well. The test material with the model had a characteristic soft look typical of Philips – at times even too soft – but the sharpness slider can be adjusted at any moment to tailor the image to personal preferences. It's also worth noting that the TV has no issues with overscan, which still occurs in some competing models. It's a small detail, but it's pleasing because it means that all content, even the oldest, is displayed as it should be.

No matter what one may say about the G6's problems with near-black signal, it must be fairly acknowledged that it handles highly compressed material and lower resolution content brilliantly. All unwanted, ugly tonal transitions are effectively reduced here by the “Smooth Gradation” feature. On the “Low” setting, the algorithm operates flawlessly – effectively masking the artifacts resulting from strong compression, without destroying the sharpness and details in the frame. Higher levels of this feature indeed smooth the image even more, but they start to blur the real texture elements of objects, which is why we recommend keeping this slider at a low level. As for the upscaling to 4K, the processor does an excellent job – edge sharpness and detail reconstruction are at the highest level, and in this respect, the G6 does not lag behind the world's best.

The OLED910 is a television with a refresh rate of 144 Hz. It's a bit disappointing that Philips didn't choose 165 Hz, because we know that the panel used in it is capable of that. On the other hand, such a bonus would mainly benefit PC gamers, as in everyday use, the most important refresh rate is 120 Hz, which is fully sufficient. Combined with the advantages of an OLED panel – lightning-fast pixel response time and no motion blur, the image is impeccably sharp and fast, even in dynamic action scenes. Kudos also goes to Philips' traditional motion smoother called "Motion Style." We can easily adjust it to our preferences: the "Smoothness" slider is for movies and allows you to choose between a more "frame-like," cinematic character and a smooth, theatrical image. Meanwhile, the "Blur Reduction" slider is for sports; it is worth setting it to the maximum value here to ensure that the image is clear and distinct during very fast shots.

The LG G6 is an OLED television, so in the category of motion fluidity, it traditionally deserves the highest ratings. The television supports a very high refresh rate of up to 165 Hz in 4K resolution, but most importantly – you will not see any signs of blurring on the screen. The response time of the panel is incredibly fast, ensuring that dynamic images remain perfectly sharp.

The OLED910 is excellent for gaming. It supports 144 Hz, so if someone has a powerful PC, they can easily take advantage of that potential. On consoles, 120 Hz is the most important, and everything works perfectly here. There is VRR, an automatic game mode, and even Dolby Vision in games along with an HGiG mode, so we actually get a full package of gaming features. Philips also added a Game Bar, which is a quick menu that shows basic information and allows you to enable a few useful things. It may not look as modern as the competition, but it works and serves its purpose. The only downside is the number of HDMI 2.1 ports. There are only two, which can be somewhat disappointing for a TV in this class. If someone is connecting two consoles and something additional to eARC - like a soundbar (which doesn't make much sense in this model, but we'll discuss that in the sound section), they'll need to figure things out a bit more. Other than that, the OLED910 has everything we expect from a gaming TV.

LG G6 is a true monster for gamers and one of the best-equipped TVs in this regard on the market. The manufacturer did not seek compromises and equipped this model with as many as four full HDMI 2.1 ports with a maximum bandwidth of 48 Gbps. This means that no matter which port you plug your PlayStation 5, Xbox Series X, or powerful PC into, you will extract the absolute maximum from them.

The TV supports a full suite of gaming technologies: from VRR (Variable Refresh Rate), through AMD FreeSync Premium Pro, to Nvidia G-Sync Compatible. Let's add to this the remarkably low, almost imperceptible input lag and a brilliantly functioning gamer panel (Game Optimizer), which allows you to continuously monitor the signal parameters. Gaming on this screen, with the perfect black of OLED and powerful refresh rates, is pure pleasure.