Philips OLED809/819 vs Haier Q80FUX

The Philips OLED 809 delivers a highly satisfactory HDR effect. The television can reach luminance levels exceeding 900 nits in most scenes, and in some cases, even surpassing 1000 nits. This brightness ensures a rich and immersive experience for HDR content with a wide tonal range. The only exception occurs in a scene from the movie The Meg, where a large amount of bright white occupies most of the screen, preventing the TV from reaching higher brightness levels. However, this is not a significant issue, as the performance is still a considerable improvement over its predecessor.

Overall, these brightness levels, especially for an OLED panel not equipped with MLA technology, impress. Coupled with excellent coverage of the DCI-P3 colour spectrum, the Philips OLED 809 offers a truly spectacular HDR viewing experience.

Alright, let's move on to the topic that generates so much discussion, namely the capabilities of the TV in HDR mode. Let's make it clear right away: the Haier Q80FUX is certainly not a brightness demon. The panel of this receiver can generate about 350 nits at peak, which in today’s reality is an absolute minimum to even talk about the presence of extended HDR tonal dynamic range. On the plus side, this power is at least stable – regardless of the test pattern or movie scene we used, the measurements invariably oscillated around 300-350 nits. These are therefore at best adequate results, definitely far from the stunning showcase of capabilities that we know from more expensive models. Fortunately, there is one aspect in which the Q80FUX makes up for these shortcomings and does so abundantly. After all, we are talking about a QLED TV (or more precisely, PFS LED), which means that thanks to the quantum dot filter applied to the matrix, it can generate really juicy, vibrant colors. These are not empty promises – a DCI-P3 color gamut coverage reaching nearly 95% is an impressive result that directly translates into very pleasant, saturated colors for the eye.

The best factory mode in which we performed all our tests was "Filmmaker," which is quite standard in televisions from this manufacturer. However, let’s first examine its characteristics before the calibration process. The first aspect we will focus on is white balance, as it is critical to ensuring the image remains free from any colour cast. The chart clearly shows that in both SDR and HDR materials, two colours dominated significantly: red and green, resulting in a strong yellow tint that affected the entire image. This was particularly noticeable on the "ColourChecker" palette, where all colours shifted towards their warmer counterparts.

The second aspect we will assess is what we consider to be the two most important charts for evaluating picture quality: gamma and the Electro-Optical Transfer Function (EOTF) curve. Both aim to maintain appropriate brightness and contrast. The first chart, which describes the brightness levels in SDR materials, shows that the brightness was significantly lower than the reference value marked by the orange line. This resulted in a sharp increase in brightness and a notable decrease in contrast, which was inconsistent with typical OLED television behaviour. The EOTF curve, on the other hand, showed greater "moderation," subtly brightening the overall image only up to 50% of the maximum brightness.

Factory settings for film mode are rarely perfect, but in the case of the Q80FUX, we encountered a noticeable imbalance. In SDR content, the image was definitely too warm, which resulted from an excessive amount of red in the white balance, giving it a slightly sepia tone. Contrarily, in HDR materials, the television fell into the other extreme—the excess of blue created an unnatural, cold effect. However, it wasn’t the whimsical white balance that was the biggest problem with this TV. The real culprit, responsible for the previously described issues, was hidden deeper. It turned out that the Q80FUX had completely misaligned gamma values and, crucially for HDR, a poorly managed EOTF curve. It was these erroneous factory settings that caused notorious clipping of the brightest parts of the image, applying that characteristic milky filter over them. Thus, we found the source of the problem. This state of affairs led to overall, significant color errors that were easy to catch even for an untrained eye. Like every television we tested, we decided to calibrate this model as well, and you can find the results of those adjustments in the next paragraph.

Philips, like most leading manufacturers, has been providing advanced calibration tools for years. The inclusion of 2- and 20-point grayscale adjustments, along with an advanced CMS (Color Management System), has yielded extremely beneficial results and fundamentally improved the perceived image. Nearly every element previously mentioned has undergone a transformation and has been restored to its natural state. This is particularly noticeable in the "ColourChecker" palette, where the measured colour samples align harmoniously. Notably, the white balance has been excellently calibrated, ensuring a pure image free from unwanted tint in both SDR and HDR content. The previously problematic gamma has been well addressed, with only minor errors that do not impact the overall performance. Similarly, the EOTF curve has been refined, removing the subtle brightening effect, and now offers a truly reference-quality presentation.

The results of our calibration efforts must, unfortunately, be considered twofold. Overall, the image is indisputably better than before the corrections, but the biggest winner of this process turned out to be SDR content. It is here, after clarifying the gamma and white balance graphs, that we obtained results that can confidently be called very good. After the setup, the Q80FUX truly shines in standard dynamics, showing only slight errors in the most challenging skin tone reproductions. Unfortunately, the weakest link still remains HDR content. And here lies the paradox: even though we managed to calibrate the white balance almost to perfection, the overall color errors still remain at a fairly high level. The reason is that the television still interprets the static HDR10 metadata "in its own way," stubbornly enforcing that unfortunate washed-out image effect, which inevitably leads to significant distortions. Although we successfully eliminated the factory excess of blue color, due to this electronic interference, the screen can still tend to fall into somewhat too cold tones. This television just has it this way.

Philips OLED 809 struggled significantly in the smooth tonal transitions test. Focusing on the TV's algorithms, particularly the feature responsible for removing posterisation, the results were disappointing. This function, which offers several adjustable settings, proved ineffective in practice. The highest setting, while it does mitigate inconsistencies, it simultaneously blurs the entire image, rendering it virtually useless.

When dealing with lower-quality content, the performance of image upscaling algorithms becomes crucial. In this regard, the algorithms implemented in the OLED 809 perform admirably. They enhance image quality effectively, with minimal visible artefacts. Although slight edge fraying can occasionally be observed, it is unlikely to be noticeable during typical viewing sessions.

If there is one area where Haier clearly shows that it has quite a bit to catch up on compared to the market leaders, it is digital image processing. The upscaling, well... is just okay. And that's about all that can be said about it. It does what it is supposed to do: it ensures that lower resolution signals don't scare you with harsh pixelation on the screen and don't look like an overly enlarged postage stamp. However, it is far from the finesse and "intelligent" sharpening that more experienced players in this market have developed over the years. The biggest drawback of the Q80FUX software, however, is the almost complete lack of additional "cleaning" and smoothing functions for the image. The receiver does not offer any noise reduction or gradient enhancement mechanisms. This means that with older or more heavily compressed materials, we simply have to accept that any imperfections in tonal transitions or color blending, which we mentioned earlier, will constantly accompany us during the viewing.

The maximum refresh rate achievable on the Philips OLED 809 is 144 Hz, a feature that can be fully utilised when connected to a high-performance PC. However, when connected to consoles or used for standard television viewing, the refresh rate remains at typical values. For users seeking enhanced motion fluidity or wishing to eliminate the characteristic choppiness of films shot at 24 fps, Philips provides a sophisticated motion-smoothing system.

In the settings menu, there is a "Smoothness" slider designed to reduce choppiness, along with a "Motion Blur Reduction" option to enhance the sharpness of fast-moving elements. These features perform impressively and allow for granular adjustments, ensuring that each setting has a tangible impact on motion perception. Notably, the system operates effectively at a refresh rate of 120 Hz, taking advantage of multiples of video frame rates. With this comprehensive range of options, users can easily fine-tune the settings to suit their preferences. For example, slight smoothing without inducing the soap opera effect offers a balanced viewing experience.

Motion clarity on the OLED 809 is further bolstered by the exceptional response time of the OLED panel, measured at approximately 0.1 ms. This surpasses the performance of IPS/ADS or VA panels, making OLED technology unrivalled in this area.

The issue of motion fluidity and blurring is largely predetermined by the use of a 60Hz panel, which naturally makes it difficult to recommend this receiver to enthusiasts of very dynamic content. Fortunately, in the Q80FUX, we find a few options (though, as we will see shortly, actually only one) designed to improve the experience with older film productions. There is a "De-Judder" slider available, which indeed affects the smoothness of the image and allows us to adjust it to our preferences: from raw, cinematic frame rates to a more theatrical, smoothed presentation. However, a genuine surprise awaits us right next to it in the menu. There is also a second slider, supposedly dedicated to eliminating blur – this is a feature we usually encounter in 120Hz panels, aimed at combating motion blur in sports. However, as expected, recalling memories from testing the K85F model, here too this slider is merely a facade. Moving it does absolutely nothing to the image and it simply looks like an oversight by the product engineers who left a non-functional option in the software for this type of panel.

The Philips OLED 809 fully supports all technologies included in the HDMI 2.1 standard, and during testing, each activated without issue. This makes the TV an excellent choice for gamers, whether on console or PC. Notably, it features HGIG mode as a strong alternative to Dolby Vision, which is less ideal for gaming on this model due to its high input lag.

The TV also includes a dedicated GameBar for monitoring gameplay parameters and adjusting settings quickly. Features like a crosshair overlay for sniper shots, shadow enhancement for better visibility, and a colour filter for gamers with visual impairments further enhance its gaming appeal.

In summary, the OLED 809 is a fantastic choice for gaming, equipped with VRR, ALLM, G-Sync, FreeSync, and HDR Dolby Vision gaming for a deeply immersive experience. The only drawback is the artificial sharpness in game mode, which cannot be fully softened, regardless of settings.

Stepping into the gaming territory, the Haier Q80FUX proves to be quite a decent companion for the "casual gamer." On board, we find today’s highly desired features like VRR (variable refresh rate) and ALLM (automatic low latency mode). However, the biggest surprise is something else. Although we are not dealing with a 4K@120Hz panel, the TV can accept and display a 120Hz signal at a lower resolution (Full HD). This is a very useful feature, allowing the conscious switch of the console to a lower resolution mode in exchange for significantly higher fluidity, which is a perfectly acceptable compromise in the gaming world.

We won’t particularly complain about the lack of extras like the "Game Bar," as it’s just a nice addition. The most concerning issues arise when we enter the world of HDR in games. Due to the fact that the TV constantly adapts the signal "in its own way," setting the brightness on the console according to the HGIG standard is nearly impossible to accomplish as per the instructions. Worse still, in the Dolby Vision mode for games, the input lag rises to about 50 ms, which is a high enough value that essentially makes this mode unusable. However, generally, we wouldn’t recommend gaming on this TV in HDR mode, so these aren’t such serious shortcomings. The most pleasing aspect is the presence of 120Hz in Full HD, which makes the Q80FUX quite a nice TV for the occasional gamer.