Philips OLED770 vs Samsung Q6F (IPS)

The Philips OLED770 does not attempt to compete with the brightest OLEDs on the market, and it would actually be hard to expect that, as it is the lowest model in Philips's series for 2025. In our measurements, it achieved a maximum brightness of about 700 nits, which allows for enjoyment of HDR effects in scenes where light appears point-wise – for example, in the flash of headlights or a starry sky. In such moments, the picture can truly impress. However, it is different when there are more bright elements on the screen. The television, like many cheaper OLEDs, limits brightness in those cases, and the entire picture noticeably dims. This was best seen in a scene from the movie The Meg, where the sun rises behind an oil rig – at that point, the brightness dropped to about 250 nits, nearly three times less. The HDR effect remains visually pleasing, but it is worth being aware that this model performs best in scenes with less intense light. Fortunately, the OLED770 has an ace up its sleeve – the coverage of the DCI-P3 color palette is as high as 99%, so colors in movies and games are saturated and very close to what the creator intended to convey.

Unfortunately, the Samsung Q6F is a very dark model. Its peak brightness in HDR does not exceed 250 nits, which is definitely too low to even speak of any "high dynamic range" effect, or HDR. In practice, it's better to stick to content in SDR format, which simply looks more predictable on this TV. Another problem is the global dimming technique – in scenes with a lot of black, the TV drastically dims the entire panel to artificially improve the black levels. This causes the image to become even darker, and brightness can drop below 100 nits. The only consolation is the QLED technology, but even here it's average. The applied quantum dot layer is not top-notch, as the coverage of the DCI-P3 color gamut does not exceed 90%. As a result, colors in HDR content may just seem under-saturated.

The first measurements already show that the factory settings of the Philips OLED770 have a lot to improve even in Filmmaker mode. The white balance chart clearly shows a lack of blue, which gives the image a slightly yellowish tint. In practice, the white is not snow-white, but leans towards warmer hues – which some may even like, but from the accuracy perspective, this is a deviation from the norm. The gamma, on the other hand, tends to be on the darker side – the average value is about 2.6 instead of the reference 2.4. In the mid-tones, the image appears muted and more saturated, which may look too "filmic," but takes away some naturalness. However, the biggest issues can be seen in color reproduction. The average error is relatively high, and some colors – especially shades of gray – clearly deviate from what should be seen. In everyday viewing, this means that sometimes colors may look less natural than we would wish.

We tested the television in Filmmaker mode, which showed us two completely different faces of this model. Looking at SDR content, we were honestly shocked at how good this TV looks straight out of the box. It was really hard to nitpick anything here. Despite a slight “haze” in the white balance or somewhat brightened details in the blacks (which directly results from the IPS panel's design), color errors hovered around the “2” level. This is surprisingly good, even outstanding, considering the price of this device.

On the other hand, what the Q6F displayed in terms of colors after switching to HDR mode was a very unpleasant surprise. The errors in color reproduction and palette were so huge that our charts literally ran out of scale. Of course, since Samsung even in such an inexpensive model offers very advanced calibration possibilities, we decided to approach the subject professionally and check what could be done about it during calibration.

Philips OLED770 has shown signs from the beginning that it houses significant potential, but it was difficult to fully see this in the factory settings. The image was sometimes too warm, and some colors seemed to have lost their naturalness along the way. However, calibration revealed that it is a television very receptive to adjustments – it reacted to every correction and almost immediately unveiled another layer of its capabilities. The white balance was successfully set both in SDR and HDR, eliminating the yellowish glow and presenting a neutral, clear white. Gamma stabilized closer to perfection, allowing midtones to regain their naturalness, and shadows no longer appeared artificially darkened, possibly even with a slight brightening effect. The effect was obvious... Movies are watched with greater ease; the image has cinematic depth, but without the feeling that something is exaggeratedly darkened. However, the most interesting part was the work on colors. Out of the box, the errors were not dramatic but slightly noticeable – skin tones were sometimes too warm, and gray didn’t always have the shade we expected. After calibration, the error values dropped to around 2, and in many cases even below 1. This is a level significantly lower than the threshold of perception for the human eye. In other words, after correction, the colors finally “clicked” into place. Looking at the screen, we had the impression that the television had begun to speak with a full voice. Like an instrument that has finally been well-tuned.

After our calibration, the colors in SDR mode looked even better – the result is quite surprising, as color errors at level "1" are something usually seen in devices costing several thousand dollars. In this regard, the Q6F is really a great screen for everyday television, less demanding series, or movies. Unfortunately, our interference in HDR mode did not bring about a noticeable improvement. The television, due to its poor black levels and low coverage of a wide color gamut, still has significant problems with proper color saturation, especially red. This is an example of a device where HDR mainly exists as a label on the box – for everyday use, we definitely recommend watching content in SDR format.

The problem of the previously mentioned color connections can largely be mitigated by the "distortion reduction" feature, which is an algorithm for smoothing tonal transitions in Philips TVs. It works best at a low setting—effectively eliminating unwanted color bands while not introducing strange artifacts or losing image detail. It's one of those features that is truly worth keeping switched on.

The issue with upscaling is somewhat less favorable. The image from a lower resolution can be too soft, while at the same time, distinctive "jaggies" appear in certain areas. The impression is that the algorithm is trying to reconcile two contradictory directions—smoothing and sharpening—and ultimately hasn't found the golden mean. As a consolation, it's worth noting that the television has no issues with overscan, meaning it doesn't cut off the edges of the image, which sometimes happens with other competing models.

The Q6F handles upscaling lower resolution content to native 4K very well. The scaling is surprisingly good here, even for such a budget TV from the QLED series. The only downside is when we watch very low-resolution material, like 576p (typical for old DVD players) – then the image may be slightly cropped. This is because the TV does not allow for the Overscan feature to be turned off, which is a common issue with Samsung devices.

The situation is completely different when it comes to digital processing, which is the attempt to smooth the image from unwanted artifacts. Here, the TV completely fails. Although we find a function in the menu called "Noise Reduction", it yields no visible results regardless of the slider setting. The only thing it seems to do is introduce unwanted errors into the image. Despite its presence in the system, we definitely do not recommend using it.

The issue of the panel in the Philips OLED770 is not entirely straightforward. The manufacturer claims a 120 Hz panel, but our measurements showed that the screen can accept a 4K signal even at 144 Hz. This sounds like great news – because who wouldn't want an extra mode for PC gaming at this price? However, the reality turned out to be more complex. With 120 Hz materials, the television behaves like most OLEDs – the picture is absolutely clear, with no trace of ghosting or blurring, making it ideal for both fast-paced games and sports broadcasts. The problem arises only at 144 Hz. Unlike models with official support for that frequency, here we observe the phenomenon of so-called frame skipping. This means that the television is unable to display all frames – some of them are skipped, causing the motion to lose fluidity, and double outlines appear on the screen. The effect resembles the operation of the BFI function, which Philips does not offer in this model anyway.

The 60 Hz panel in the Samsung Q6F is the standard in this price range, which makes it a rather average model for dynamic sports or gaming. However, in the case of movies, the TV performs quite well thanks to the smoothing feature. The "Motion Smoothing" option allows you to adjust the fluidity of motion to your own preferences – from maintaining a cinematic feel to full fluidity.

If someone is looking for a gaming TV, the Philips OLED770 is a candidate that's hard to ignore. The mere fact that we have an OLED here provides a great starting point – perfect blacks and infinite contrast make evening sessions in atmospheric games look like they’ve been pulled straight from the cinema. On top of that, there’s the Ambilight system, which features LEDs on the back of the TV that extend the image onto the wall behind the screen. The effect is such that even regular gameplay in FIFA can look like a small spectacle, and in horror games, the atmosphere becomes really intense. On the technical side, it’s pretty good as well. The Philips OLED770 supports Variable Refresh Rate (VRR) up to 120 Hz, has an automatic low latency mode for gamers (ALLM), and if someone is using an Xbox Series X, they can also count on Dolby Vision support in games. You just need to know that in this mode, input lag is slightly higher than standard, although still at an acceptable level. As a bonus, we get the “Game Bar” panel, which is a special tool strip for gamers. It's not the most conveniently designed solution, but it allows you to check key parameters without leaving the game. In total, this presents a picture of a TV that on one hand has all the most important gaming features, and on the other can add something unique – Ambilight. And it’s this mix of technology and visual effect that makes the OLED770 one of the better screens for gaming in a home environment.

We won’t beat around the bush – the Q6F is not a television designed with gamers in mind. While it does have features like ALLM (Auto Low Latency Mode) and VRR frame synchronization for consoles, the list of benefits pretty much ends there. Besides these basics, the TV offers nothing more that might satisfy those who spend a lot of time in front of a console. It’s a real shame that such a useful tool as Game Bar is missing here, which in Samsung’s higher models allows for quick control of game parameters. In terms of gaming, this is an absolutely basic model and is only suitable for "casual" gamers.