Panasonic Z95B vs Philips PUS7000

The quality of HDR in the Panasonic Z95B belongs to the absolute elite. Thanks to the latest generation panel, named by the manufacturer Primary RGB Tandem OLED, the television can achieve over 2000 nits of brightness in movie scenes. The effect is impressive and can amaze with the intensity of light, giving a sense of contact with the screen that goes beyond previous experiences. Similar sensations accompanied us only during tests of the LG G5, Samsung S95F, or Philips OLED910. Of course, there are moments when the device's algorithms decide to limit luminance – this especially applies to full-screen bright sequences, such as the closing credits in the movie The Meg. Even then, the Z95B maintains a level of around 1500 nits, which is still a result that makes a huge impression. One can say that HDR in this model has been brought to a masterful form. A significant step forward is also visible in the reproduction of the color palette. The new tandem OLED panel does not yet match the best QD-OLED screens in terms of full gamut coverage, but the gap between these solutions has significantly narrowed. When watching movies, the differences are subtle enough that it's hard to notice them under normal conditions, and the colors remain vivid and saturated.

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is not enough to correctly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a regular SDR recording. Therefore, it's better to stick with the latter format to avoid issues in displaying bright scenes, which you can read about below. The situation is not improved by the fact that this is a classic LCD model without additional layers to enhance colors, such as QLED or PFS. As a result, colors in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

The factory color reproduction in Filmmaker mode, my friends, is a true phenomenon in the case of the Panasonic Z95B. I'm talking about our test unit, but the result was so good that it's hard to believe. The only detail to nitpick is a slight lack of blue in the white balance, but other than that, the television, right out of the box, displayed an image like we've never seen in factory mode. Color palette tests, Color Checker – everything pointed to values below Delta 2. This is a much lower result than the threshold of human eye perception, which means, quite frankly, that the viewer stands no chance of noticing serious deviations. It looks as if Panasonic really calibrated this model at the factory stage. Of course, we cannot rule out that we got an exceptionally well-set unit, but the result is still impressive. We are very strict in our assessments of factory calibration, and here our jaws simply dropped.

We tested the television in movie mode, which theoretically should provide the best and most natural colors. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant deficiencies in displaying red. Poorly tuned white balance and too low saturation of this color cause the image to appear too cool. As a result, one might get the impression that the displayed content is simply lacking in vibrant colors. The situation is exacerbated by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, the Philips menu offers many functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

The color reproduction after calibration in the Z95B is a topic that is difficult to elaborate on for long because there simply wasn't much to be done here. A slight adjustment of the white balance was enough to eliminate the lack of blue, and at that moment the picture jumped to an almost reference level. I must admit that we haven't had such a small scope of work in a long time. If any of you are particularly observant, you might notice minimal deviations in the EOTF curve, but this is more related to the operation of the dynamic tone mapping function that we mentioned earlier. Really, this is not a flaw, but rather a feature of this solution, which intentionally changes the brightness characteristic depending on the scene. In summary, we are extremely impressed. The Panasonic Z95B is a television that already looks great right out of the box, and after calibration, it reaches a level where it is really hard for us to find anything to improve.

After professional calibration, it is clear that the PUS7000 responds well to image adjustments. In this price range, this is not a given. The effects should be assessed in two scenarios, depending on what content we plan to watch. SDR performs the best. After our corrections, the image looks really good. Most color errors fell below level 3, which is the threshold at which distortions typically become visible to the naked eye in measurements. Movies, series, sports, and regular television present themselves naturally, without unpleasant deviations. If someone primarily watches classic channels or streaming in HD quality, the difference after calibration will be noticeable immediately. However, it must be made clear that the PUS7000 is still not a television suitable for sensible HDR, and calibration does not change much here. The reason lies in the hardware: colors remain too undersaturated. The television lacks solutions that expand the color gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot show the intense colors required by HDR. This is most evident in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it results from the design of the backlighting and the panel itself.

Let's start with what works well. The upscaling in the Z95B is at a very high level – the picture in lower resolutions is clear and sharp, with only minor drawbacks being slight aliasing in some areas of the image. It's also important that the television does not crop the material in any way and maintains its aspect ratio, which is not always an obvious fact even in 2025.

The situation is worse when it comes to digital processing. Features such as "gradation smoothing" or "block noise reduction" practically do not work – the tested material looked identical regardless of the settings. We might as well point out that this function simply doesn't exist. This is somewhat disappointing, especially since Panasonic strongly promotes its HCX Pro AI II processor, boasting of the presence of artificial intelligence that improves picture quality. Meanwhile, in such a basic matter, the television does not deliver a real effect and looks worse than one might expect from top-of-the-line equipment.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at a low setting. However, it has a flaw: if the action is too aggressive, it can introduce undesirable artifacts on the screen. It’s a good idea to experiment with this setting to find the sweet spot between a smooth image and detail clarity.

The upscaling, which is the enhancement of lower quality materials to 4K, is adequate. The image after processing is very "soft," which is typical for almost all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu to achieve a more pronounced effect.

The OLED matrix with a very high refresh rate already provides an extremely sharp image even in dynamic sports scenes, such as soccer or basketball matches, and the Z95B is no exception. It's also very important that the television is equipped with the proprietary image smoothing system "Intelligent Frame Creation." Among the available sliders, the most important one turns out to be the one named "film smoothness," because it allows adjusting the motion to personal preferences when watching 24-frame material, that is, movies – from a more "frame-like" appearance to a smooth, almost theatrical effect. It's a bit of a shame that Panasonic did not choose to push the latest OLED matrix to 165 Hz, as Samsung did with the S95F or LG with the G5, because we know the panel is technically capable of it. On the other hand, this is mainly an advantage for PC gamers, so for everyday viewing this is not a significant drawback as we are limited to 120Hz.

In this regard, we don't really have any good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually standard, and it's hard to expect more. However, the worst part is that the TV does not have any motion smoothing features. There are no supporting systems for either movies or sports. We have to accept that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, the motion may appear choppy or unclear. We have no way to enable any smoother that would soften this effect.

The Panasonic Z95B is completely equipped for gaming. Two HDMI 2.1 ports with full bandwidth of 48 Gb/s guarantee support for everything you can expect from a modern screen. There is VRR frame synchronization, an automatic game mode (ALLM), and full compatibility with HDR formats used in games. The TV supports both Dolby Vision for Xbox and the popular HGiG, which has been implemented correctly in this case, so it actually works as it should.

Although the brand is mainly associated with home cinema and equipment for filmmakers, there is also a place here for conveniences for gamers. It comes with Game Bar (or rather Game Circles) – visually it looks a bit unusual, but it does its job and allows you to quickly check the most important image parameters. What it really lacks for complete happiness is actually just four HDMI 2.1 ports instead of two. It's a minor issue, but one would expect a full set in a TV of this class.

Although the PUS7000 is not marketed as a gaming TV, it does not perform as poorly in this category as one might expect. While there is no support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has included several important features that genuinely improve the comfort of playing on a console. The most significant of these are VRR and ALLM technologies. VRR is responsible for synchronizing the screen with the number of frames generated by the console. This prevents the image from "tearing" and keeps it consistent even during sudden frame drops in the game. In turn, ALLM is a solution that automatically switches the TV to the lowest latency mode right after detecting a signal from the console. All of these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick overview of current settings and connection status without interrupting gameplay, which is a very convenient solution.