Panasonic Z95B vs Dreame S100

The quality of HDR in the Panasonic Z95B belongs to the absolute elite. Thanks to the latest generation panel, named by the manufacturer Primary RGB Tandem OLED, the television can achieve over 2000 nits of brightness in movie scenes. The effect is impressive and can amaze with the intensity of light, giving a sense of contact with the screen that goes beyond previous experiences. Similar sensations accompanied us only during tests of the LG G5, Samsung S95F, or Philips OLED910. Of course, there are moments when the device's algorithms decide to limit luminance – this especially applies to full-screen bright sequences, such as the closing credits in the movie The Meg. Even then, the Z95B maintains a level of around 1500 nits, which is still a result that makes a huge impression. One can say that HDR in this model has been brought to a masterful form. A significant step forward is also visible in the reproduction of the color palette. The new tandem OLED panel does not yet match the best QD-OLED screens in terms of full gamut coverage, but the gap between these solutions has significantly narrowed. When watching movies, the differences are subtle enough that it's hard to notice them under normal conditions, and the colors remain vivid and saturated.

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached about 600 nits. This is a really good result, although not the highest, considering the capabilities of the competition in this price range. In fullscreen scenes, it is evident that the television can generate an image that strikes with brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model tried above all to maintain the deepest blacks. However, this came at the expense of HDR effect – and in a drastic way. In such scenes, the brightness of bright elements dropped below 100 nits, which is a truly tragic result, far from any HDR effect. This aspect can be improved, though not without any "buts." It is enough to change the local dimming setting in the television's menu, but then the blacks in such scenes simply turn gray. It’s a pity that Dreame could not refine the local dimming algorithms better, and the S100 is another example that the mere number of local dimming zones does not always translate into better image quality. As a consolation, it is worth adding that the Dreame S100 is advertised as a "QLED" television, although in reality it utilizes a PFS LED filter. As a result, the colors are appropriately saturated, and the color gamut coverage we measured exceeded 94% of the DCI-P3 palette.

The factory color reproduction in Filmmaker mode, my friends, is a true phenomenon in the case of the Panasonic Z95B. I'm talking about our test unit, but the result was so good that it's hard to believe. The only detail to nitpick is a slight lack of blue in the white balance, but other than that, the television, right out of the box, displayed an image like we've never seen in factory mode. Color palette tests, Color Checker – everything pointed to values below Delta 2. This is a much lower result than the threshold of human eye perception, which means, quite frankly, that the viewer stands no chance of noticing serious deviations. It looks as if Panasonic really calibrated this model at the factory stage. Of course, we cannot rule out that we got an exceptionally well-set unit, but the result is still impressive. We are very strict in our assessments of factory calibration, and here our jaws simply dropped.

We tested the Dreame S100 in "movie" mode and definitely recommend using this setting for watching all kinds of content. Interestingly, in the deeper settings of the TV, we also find a dedicated "Filmmaker" mode, which is available today from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all image-related settings and does not allow any configuration in the menu - not even motion smoothing. So how do the factory colors perform on the S100? Not too bad, but also not great. The TV itself was quite heavily tinted with blue components, which is clearly visible in our white balance measurements. This caused the image to be artificially brightened, and the colors had a slight bluish tint. This is confirmed by the Color Checker palette, which showed how color samples leaned towards blue, generating quite significant color errors. The image in HDR mode looked definitely better, where color errors were not as prominently visible, though they still fell far from ideal. Here, the white balance was also too heavily skewed towards the blue color, which caused quite significant errors in color reproduction.

The color reproduction after calibration in the Z95B is a topic that is difficult to elaborate on for long because there simply wasn't much to be done here. A slight adjustment of the white balance was enough to eliminate the lack of blue, and at that moment the picture jumped to an almost reference level. I must admit that we haven't had such a small scope of work in a long time. If any of you are particularly observant, you might notice minimal deviations in the EOTF curve, but this is more related to the operation of the dynamic tone mapping function that we mentioned earlier. Really, this is not a flaw, but rather a feature of this solution, which intentionally changes the brightness characteristic depending on the scene. In summary, we are extremely impressed. The Panasonic Z95B is a television that already looks great right out of the box, and after calibration, it reaches a level where it is really hard for us to find anything to improve.

The Dreame S100 turned out to be a device very susceptible to professional calibration. In its menu, we found a whole array of advanced options that allowed us to effectively correct factory errors. Thanks to advanced white balance correction – both in SDR and HDR content – we completely eliminated excess blue components. The image immediately became much more natural and pleasant to view. After fully tuning the colors, errors in the Color Checker test dropped below Delta E values of 2-3. For the average viewer, this means that any color distortions have become nearly impossible to notice with the naked eye. This is a really nice surprise, as often new brands in the television market have significant problems with proper implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we need to criticize is the way the television manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, we observed anomalies in the EOTF curve we measured. In the areas where high highlights should appear, there is a slight uplift of the curve above the reference line. In practice, this results in unnatural brightening of some of the brightest elements in movies or games. Despite this minor flaw, professional calibration brings a huge, very positive change to this model.

Let's start with what works well. The upscaling in the Z95B is at a very high level – the picture in lower resolutions is clear and sharp, with only minor drawbacks being slight aliasing in some areas of the image. It's also important that the television does not crop the material in any way and maintains its aspect ratio, which is not always an obvious fact even in 2025.

The situation is worse when it comes to digital processing. Features such as "gradation smoothing" or "block noise reduction" practically do not work – the tested material looked identical regardless of the settings. We might as well point out that this function simply doesn't exist. This is somewhat disappointing, especially since Panasonic strongly promotes its HCX Pro AI II processor, boasting of the presence of artificial intelligence that improves picture quality. Meanwhile, in such a basic matter, the television does not deliver a real effect and looks worse than one might expect from top-of-the-line equipment.

The scaling and digital processing in the Dreame S100 is handled by a technology that the manufacturer proudly calls Dreamind™ Pro AI. However, it is essential to clarify that this is not a proprietary processor but merely a marketing name for a chip from MediaTek – specifically, the model MT5889. Unfortunately, we are talking about quite an outdated unit, from the time when MediaTek lagged significantly behind the competition in terms of performance. This, unfortunately, has a direct impact on the image, as this chip is responsible for that as well. The upscaling in the S100 is rather mediocre, and the processor tends to strongly and artificially sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find a "Contour Smoothing" function, which theoretically is supposed to improve tonal transitions. In practice, it brings almost no improvement – setting it to any level rarely eliminates visible color banding but can unnecessarily blur elements of the image that should remain sharp.

A separate problem is the phenomenon of overscan (clipping the edges of the frame), which is almost always visible here. Although there is an option to set the screen to display the full frame in low-resolution materials, it requires activating the aforementioned Filmmaker mode. And as you already know, this mode completely blocks any other adjustments in the image menu. In our test tables, we noted that the television offers the option to disable overscan, as technically such a feature exists in the system – however, in everyday use, with reasonable image settings, you will not be able to take advantage of it.

The OLED matrix with a very high refresh rate already provides an extremely sharp image even in dynamic sports scenes, such as soccer or basketball matches, and the Z95B is no exception. It's also very important that the television is equipped with the proprietary image smoothing system "Intelligent Frame Creation." Among the available sliders, the most important one turns out to be the one named "film smoothness," because it allows adjusting the motion to personal preferences when watching 24-frame material, that is, movies – from a more "frame-like" appearance to a smooth, almost theatrical effect. It's a bit of a shame that Panasonic did not choose to push the latest OLED matrix to 165 Hz, as Samsung did with the S95F or LG with the G5, because we know the panel is technically capable of it. On the other hand, this is mainly an advantage for PC gamers, so for everyday viewing this is not a significant drawback as we are limited to 120Hz.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a panel with a 144 Hz refresh rate, although in reality, the vast majority of users using it in a traditional way will still be limited to 120 Hz (because today's equipment, apart from PCs, only allows for such values). Thanks to the high refresh rate, the image in motion remains really sharp, largely due to the well-functioning MEMC fluidity enhancer. In the menu, we find predefined modes that allow the TV to efficiently add artificial frames, which effectively improves the fluidity of dynamic sports shots, but also helps get rid of image stuttering in film and series materials recorded at 24 frames.

The Panasonic Z95B is completely equipped for gaming. Two HDMI 2.1 ports with full bandwidth of 48 Gb/s guarantee support for everything you can expect from a modern screen. There is VRR frame synchronization, an automatic game mode (ALLM), and full compatibility with HDR formats used in games. The TV supports both Dolby Vision for Xbox and the popular HGiG, which has been implemented correctly in this case, so it actually works as it should.

Although the brand is mainly associated with home cinema and equipment for filmmakers, there is also a place here for conveniences for gamers. It comes with Game Bar (or rather Game Circles) – visually it looks a bit unusual, but it does its job and allows you to quickly check the most important image parameters. What it really lacks for complete happiness is actually just four HDMI 2.1 ports instead of two. It's a minor issue, but one would expect a full set in a TV of this class.

The Dreame S100 seems almost like the perfect screen for gamers. The TV is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, which means that features such as Auto Low Latency Mode (ALLM) and Variable Refresh Rate (VRR) synchronization in the range of 48-144 Hz work seamlessly on consoles. It also has a well-designed game panel (Game Bar) that allows you to continuously check the most important parameters – from active picture modes to the number of frames rendered by the console, and even the ability to add a crosshair in the center of the screen. All of this looks great on paper, but the biggest issue with the S100 is the implementation of HDR mode in games. The TV does not have a properly implemented HGiG format. As a result, an unsuspecting user may incorrectly configure the console during the initial setup of the display. A wrong configuration can lead to a picture that is too dark or too bright (as a guideline: we suggest setting the brightness in the Xbox console menu to about 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format is also problematic; it often just would not activate at all when using the XBOX – Dreame S100 line. And when it was managed to be activated, gaming was impossible due to a very high input lag that often exceeded 100ms. If the manufacturer can improve the HDR issue in games through an update, the S100 will be truly excellent equipment for gamers. For now, however, one must reckon with compromises.