LG QNED80A6A (IPS) vs LG OLED C6 (WOLED)

When it comes to image dynamics and brightness, the QNED80A has its feet firmly on the ground. It is not a "light beast" – during our measurements, peak brightness oscillated around 350-400 nits. To put it plainly: these are values that will not allow HDR formats to fully spread their wings. So don’t expect the glare of the sun or car headlights in movies to blind you. However, this TV has a powerful ace up its sleeve that saves the overall view of the image – it is the colors. LG engineers have implemented an advanced filtration system here (technically likely based on a PFS phosphor, marketed as QNED/NanoCell), which does a fantastic job. Thanks to it, despite the average brightness, the screen can generate exceptionally saturated and pure colors. Our instruments showed coverage of the wide DCI-P3 cinema palette at the level of 93-94%. This result outclasses most standard LCD TVs. In practice, this means that when watching 4K HDR content, the image – while not particularly bright – is very plastic, vibrant, and pleases the eye with the depth of colors.

The HDR effect on the LG C6 is really very good. LG Display's new WOLED panel primarily brought a significant increase in brightness. In our unit we measured around 1,500 nits and, importantly, the TV can show similar values in many normal movie scenes. That gives HDR the proper impact. Bright highlights, lamps, or sunlight can be really strong, and most HDR movies simply look very impressive. Of course it's still an OLED, so brightness drops in scenes with a lot of white. The fifth scene of The Meg illustrates this well, where the C6 reached about 600-700 nits. That's still a very good result, but it also shows the new panel hasn't removed all the limitations typical of OLEDs.

Colors

When it comes to color, there is also little to complain about. The C6 covers about 99% of the DCI-P3 gamut and roughly 75% of BT.2020. In practice the colors are very saturated and, importantly, stable regardless of the scene. That's worth emphasizing, because not every TV behaves the same in this respect. In some RGB Mini LED models color saturation can depend more strongly on image brightness. Today a wider color gamut is mainly offered by QD-OLED TVs and new SQD models with a new generation of quantum dots. However, the C6 still performs very strongly here and is able to generate appropriately saturated colors in most movie scenes.

Here, regardless of whether you encounter the VA or IPS version, the situation looks identical. LG engineers once again served us their vision of a "gaming look," which unfortunately has little to do with accuracy. After switching to console, the white balance automatically drifts into very cold areas. The image is dominated by the color blue, making it seem artificially sharpened, and the white is so aggressive that it is almost burned out. This creates an effect that we associate with bright retail modes – everything is supposed to shine and scream "I am digital." While some may like this, we must say it straight: this is not an accurate image. If you care about naturalness, we suggest checking the settings right away and changing the color temperature to a warmer one.

Right out of the box the LG C6 is pretty well set up, especially if you choose Filmmaker mode. In SDR material the white balance is decent, although as brightness increases it starts to lack a bit of red. The picture becomes a little cooler as a result, but it’s not such a big difference that it stands out during normal viewing. More happens in the brightness response itself. Gamma is a bit low and instead of holding at 2.4 it sits closer to 2.1–2.2 over much of the range. In practice the C6 slightly brightens midtones. Shadows are therefore more readable, but the image loses some depth compared with how it should look in a dark room. In HDR the situation is a bit more interesting. The start of the grayscale looks very good, but from about 20–30% brightness the white balance starts to drift more and more. As brightness rises there’s more red and a noticeable lack of blue. In the brightest highlights the difference is already significant and also affects reproduction of some colors. The EOTF curve itself is handled fairly well over most of the range. The C6 only has a tendency to slightly brighten the image, which we also saw during our film comparisons. The largest deviation appears around the brightest highlights, where the TV begins to adapt the signal to the panel’s capabilities. So the out-of-the-box Filmmaker mode in HDR isn’t perfect, but overall it performs well. The biggest room for improvement is the white balance, especially at high brightness.

After professional calibration, the QNED80A in the IPS version has changed beyond recognition, especially in "regular" content (SDR). We managed to eliminate the greenish tint and calm down the overly bright gamma. In classic television or older games, color errors (DeltaE) fell below the threshold of perceptibility (value < 2). The image is now consistent, natural, and truly pleasing to the eye. The situation is somewhat more complicated in HDR mode. Although the colors are already in place, the television has trouble perfectly controlling the brightness (EOTF curve). Due to the limitations of edge lighting and the rather poor adjustment options provided by LG in this area, the television's software sometimes "does what it wants" just to mask the imperfections of black and contrast. However, this is not a cause for concern – despite these technical limitations, the image after calibration is a class better than what you saw out of the box.

LG TVs have been very receptive to calibration for years, and the C6 is no exception. After adjustment the white balance was set almost perfectly, and most color errors dropped to values below 3, often even around 2. In practice this means very accurate color reproduction in both SDR and HDR. An interesting detail appeared only with the HDR brightness characteristic. On a classic EOTF chart everything looks nearly ideal, and at first glance it would be hard to find fault. Only when we measured the TV’s behavior using filters based on actual movie scenes did it become clear that the C6 has a slight tendency to artificially boost image brightness.

It’s not a huge difference and many people may even see it as a positive, because HDR looks a bit more impressive this way. From the standpoint of fidelity to the source material this isn’t ideal — some scenes are simply a touch brighter than the filmmaker intended. Interestingly, this is somewhat unusual for LG. In previous generations, the brand’s TVs typically stuck very closely to the reference tone curve after calibration. With the C6 we’re still very close to the standard, but that subtle boost in brightness is indeed noticeable in films and series.

It often happens that cheap 4K TVs mercilessly expose the flaws of low-resolution materials. Here, it's different. The QNED80A is great equipment for watching content that isn't perfect. The processor does a great job of upscaling the image, making even older recordings look quite decent on a 4K screen – they are consistent and free of digital noise. An interesting feature is the gradation reduction available in the settings. It is quite effective in combating so-called banding (color banding) in low-bitrate materials. Of course, one should approach it with some caution. Due to the lower computing power of the chip (compared to the premium series), enabling this option can sometimes result in unwanted artifacts or blurriness. Despite this risk, we encourage experimentation, as in many cases this feature can save a poor-quality viewing experience.

The LG C6 has taken a really big step forward here. The TV uses the same processor found in the flagship G6, and in terms of image processing the two models are very similar. That’s a big plus, because in this area LG’s processor this year performs excellently. The "Smooth Gradation" feature works especially well. With heavily compressed material it can effectively hide ugly tonal transitions and artifacts that often appear, for example, in lower-quality streaming. It’s best to leave it set to "Low." Then the improvement is clear, and the TV doesn’t yet start blurring fine details. Higher levels smooth the image more, but can already remove some of the natural texture of objects on the screen. The upscaling itself also performs very well. Lower-resolution content is sharpened properly, edges look clean, and the processor quite effectively rebuilds fine details. In this regard the C6 is already very close to LG’s best TVs, and the differences compared with the G6 are small.

In terms of motion reproduction, the QNED80A unfortunately has a tough time. The television is based on a 60Hz refresh rate panel, which in 2025 in the QNED series is quite a disappointment. If you are looking for perfect sharpness in dynamic soccer matches, you might feel a bit unsatisfied. A solution in this situation is the TruMotion system. It allows for artificially adding frames, which smooths out the image in movies and series. In the menu, you will find the De-Judder slider – we recommend setting it to a value of 2, 3, or 4. This is the "golden mean" that improves fluidity without turning the film into a soap opera.

The LG C6 features a panel with a maximum refresh rate of 165 Hz, which is great news especially for gamers using a powerful PC. For movies, sports, or consoles we'll of course use up to 120 Hz, but even then it's hard to fault the motion clarity. As you'd expect from an OLED, the panel's response time is almost instantaneous. Moving objects therefore don't leave the characteristic smears you still see on LCD TVs. This is particularly noticeable in sports and fast-paced games, where the picture remains very clean even during dynamic motion.

For movies and TV, LG also provides the TruMotion motion-smoothing system. In the user settings you'll find two separate sliders. De-Judder is mainly for low-frame-rate content, that is primarily 24 fps films and series. It can slightly reduce the characteristic judder, or be set higher if you want a much smoother image. De-Blur is useful for higher-frame-rate material, mainly sports broadcasts and 50/60 fps television.

In the gaming section, we won't sugarcoat it for you – the QNED80A is not e-sports equipment. The lack of support for 120Hz signal is a fact that must be accepted. However, LG engineers have done everything to squeeze the maximum potential out of this 60 Hz panel, providing gamers with a set of desired features. First and foremost, the television supports VRR (in the range of 48-60Hz) and ALLM. This means that the image is smooth, does not stutter, and the television automatically switches to low latency mode as soon as we pick up the controller. Accessing these options is incredibly simple thanks to the dedicated system overlay – Game Dashboard. It is also worth appreciating the support for the HGiG format. This is a nod to owners of modern consoles. Although the screen does not support gaming Dolby Vision, HGiG ensures that the television "understands" how to display games in HDR. This helps us avoid the issue of blown-out clouds, which is unfortunately a plague on cheaper LCD televisions.

LG has focused heavily on gamers for years, and the C6 really lacks nothing important. The TV supports 4K at 120 Hz from consoles, and when connected to a PC it can run up to 165 Hz. It also offers VRR from 40 to 165 Hz, ALLM, and properly working HGiG. A big plus is Dolby Vision support for games, so the Xbox Series X can use that format without sacrificing game mode. The package is rounded out by a Game Bar that lets you quickly check key signal parameters and change settings without leaving the game. In terms of features, the C6 is one of those TVs that’s really hard to find fault with. Whether you play on PlayStation, Xbox, or PC, practically everything you could expect from a modern gaming TV is available here.