LG OLED G4 vs Samsung QN80H

The LG G4 excels in delivering an incredibly vivid HDR experience, positioning it as one of the best models in its class. Equipped with second-generation Micro Lens Array (MLA) technology, it achieves a remarkable peak brightness of 1474 nits in real-world scenes. While it may not match Mini LED-backlit LCD TVs in full-screen white scenes, the overall performance is outstanding. The fine details in HDR content shine brightly, a distinct advantage of OLED technology over non-OLED displays. With this impressive brightness and wide DCI-P3 colour gamut coverage, HDR content is brought to life with unmatched engagement and immersion.

Samsung QN80H is without a doubt a bright TV. In synthetic tests it breaks the 1000-nit barrier, which on paper already promises a solid HDR effect. In practice the screen really shows its claws, though it can't fully spread its wings (or its backlight 🤔) in every situation. The best impression comes from bright, expansive shots. Sunlit exteriors or heavily lit scenes look really good on it. Brightness then stays around 700 nits, which gives a noticeable step up in quality over standard SDR. Problems start in dark scenes with small, pinpoint highlights. The QN80H tends to heavily dim them, doing everything it can to protect black levels. On one hand we gain better contrast, on the other... we lose some of the dynamics and the sparkle of fine HDR details. The TV therefore has considerable potential, but the dimming algorithm can be too restrictive.

Color gamut coverage

Colors are good too. The QN80H uses quantum dot technology, and in our measurements it covered 93% of the DCI-P3 space and about 70% of BT.2020. Today those results won't exactly blow anyone away, but in real-world use they're more than enough to deliver vivid, natural-looking images in most movies and TV series. Colors are properly saturated and, after proper tuning, don't look artificial or overly aggressive.

Before calibration, the "Filmmaker" mode on the TV had a noticeable red and green colour dominance, resulting in a warm-yellow hue across both SDR and HDR content. This warm tone, typical of modes like "Cinema" and "Filmmaker," led to a yellowish cast that was evident when switching from the "Standard" mode.

Looking at the brightness characteristics, the Gamma chart showed decent performance for mid-tones and bright whites, but it struggled with the darkest details, which tended to merge into a black blob. HDR content, as represented by the EOTF curve chart, displayed a drop in contrast due to excessive brightness, which overshadowed fine details and negatively affected the overall image quality. Additionally, the "ColourChecker" chart revealed that colours were under-saturated, contributing to a less accurate and vibrant visual experience.

This provided a good foundation to build on, but calibration was needed to bring out the full potential of the "Filmmaker" mode and address these issues.

The QN80H's factory settings were really good, especially compared with most TVs that come into our tests. Of course, we performed measurements in Filmmaker Mode, and that's the mode we recommend turning on right after the initial setup. In SDR material our unit was set up surprisingly well. The white balance was very even, colors looked natural, and the errors were so small they were hard to spot without measurement equipment. The only weak point was the gamma. In brighter parts of the image the TV brightened them a bit too much, so the picture sometimes lost a little depth. Even so, we'd like most TVs to look this good straight out of the box.

It was a bit worse in HDR. The white balance itself was still set correctly, so the problem wasn't with the colors but with how the QN80H managed image brightness. You could see that immediately on the EOTF chart. The TV brightened large parts of scenes too much, causing the brightest elements to blow out. Interestingly, at the same time very small points were often dimmed too much. As a result some fine detail simply disappeared. So the factory Filmmaker Mode in HDR isn't bad, but it's definitely not as well calibrated as in SDR.

The manufacturer has been offering extensive support for the calibration process in its LG televisions for many years. Therefore, we used 2- and 20-point grayscale adjustments along with an advanced CMS (Colour Management System) to optimise the display. As shown, the calibration procedure greatly improved each parameter. The results included studio-quality colour reproduction, enhanced detail in dark areas, corrected brightness characteristics, and accurate colour saturation. This led to a near-perfect match with the reference image—the one the film director saw on the preview monitor. It’s also worth mentioning that LG G4 televisions are unique in offering even deeper image adjustments through 3D LUT matrices, a feature primarily suited for post-production or graphics studios.

The biggest difference after calibration was in HDR Filmmaker mode. SDR was already very good out of the box, so we didn't have much work to do there. In HDR, however, we managed to tame the way the QN80H handled brightness, as it had been over-brightening most scenes. After calibration the picture is calmer, more natural, and much closer to how a faithful picture should look.

The LG G4 does not perform well with materials rich in tonal transitions, leading to a pronounced posterization effect. However, the manufacturer has included a smoothing system called "Gentle Gradation," with three levels: Low, Medium, and High. These settings are effective at smoothing bright colours, though less so for darker tones. It is recommended to use the Low setting, as the higher levels can distort the director's intentions by removing film grain.

When it comes to upscaling lower-quality material, the television's performance is quite good, delivering a sharp and clear image. However, attention should be paid to the jagged edges of fine details and the occasional halo effect around figures. This occurs due to the sharpening imposed by the LG G4, even when the lowest setting is selected (0). This is a noticeable change from the LG G3, which did not apply such strong sharpening, even at setting 0.

Digital image processing in the Samsung QN80H is handled by the second-generation NQ4 AI processor. It's a chip we already know from earlier models and it still performs very well, especially with lower-resolution material. The image is effectively upscaled to 4K, but without excessive sharpening and without the feeling that the TV is forcing improvements on the source material.

The "Noise Reduction" feature also proves useful. It can noticeably reduce posterization and visible banding in poorer-quality material, particularly in low-bitrate streaming. However, it's important to remember that it doesn't work without side effects. It can remove some film grain and slightly smooth the image. So with a good-quality source we'd leave this feature off. If, however, banding and uneven tonal transitions bother you more than losing some grain, "Noise Reduction" can be a really useful addition.

The LG G4 offers a maximum refresh rate of 144 Hz, achievable when connected to a powerful PC. For most users, however, the TV operates at a maximum of 120 Hz, ideal for watching sports or other content with fast motion. To improve image fluidity, the television includes the "TrueMotion" motion smoothing system, which features two separate sliders: De-Blur (for the sharpness of moving images) and De-Judder (for judder reduction). These sliders allow users to adjust the level of smoothing between 0 and 10, ensuring everyone can find the ideal setting.

With a response time of 0.78 ms, the LG G4 delivers exceptionally clear images, outperforming LCD televisions, which can have much slower response times. This results in no trailing blur behind moving objects, as shown in the "UFO Test." The TV also provides precise control over motion smoothing, which is especially beneficial during fast-paced video game sequences. Thanks to OLED technology, the G4 eliminates ghosting, ensuring a crisp and clear image even during the most dynamic sports or action scenes.

Motion blur and motion handling on the QN80H are really good, mainly thanks to the fast panel. In 4K the screen refreshes at up to 144 Hz, and when switched to Full HD and connected to a PC it can reach as high as 240 Hz. That's new for Samsung TVs and a nice bonus for people who want to use the TV for PC gaming as well. We were more interested, however, in how the QN80H performs at 120 Hz, since consoles use that refresh rate. Here it's really good. The panel doesn't have a big problem with the smearing typical of VA panels, and slight trails behind moving objects are mostly visible on dark backgrounds. This is nothing that would interfere with normal sports viewing or gaming. The TV also includes a motion smoothing system that Samsung calls "Image Clarity." You can adjust judder reduction and blur reduction separately, so it's easy to tailor its operation to movies, sports, or your own preferences.

The LG G4 TV supports all the features encompassed by the HDMI 2.1 standard, making it a gaming powerhouse. During testing, every feature activated seamlessly, ensuring a smooth experience for both console gamers and PC users. Notably, the HGIG mode (HDR Gaming Interest Group) is implemented correctly, allowing games mastered to brightness levels higher than the TV’s maximum luminance to map tones accurately, preserving the game’s original visual integrity.

A notable highlight is the dedicated GameBar, which can be accessed at any time to quickly check or adjust game settings. More importantly, enabling VRR (Variable Refresh Rate) does not compromise contrast—a common issue in TVs with local dimming or Mini LED backlighting. This is thanks to the OLED panel’s self-emissive pixels, which maintain consistent contrast. However, a slight grey flicker may appear when VRR is enabled, though this is standard across OLEDs.

In summary, the LG G4, like most OLED TVs, is ideal for gaming and online competitions. Its HDMI 2.1 ports offer a full 48 Gbps bandwidth, supporting features such as VRR, ALLM (Auto Low Latency Mode), G-Sync, FreeSync, and HDR Dolby Vision gameplay, ensuring an exceptional gaming experience.

Samsung QN80H is a TV that scores very well on gamer-oriented features. The biggest new addition for 2026 is DLG mode, which allows refresh rates up to 240 Hz when the image is switched to Full HD resolution. This option is aimed mainly at PC users, but it also shows that Samsung is still heavily developing the gaming side of its TVs. That’s not the end of the list of advantages. The QN80H has four full-featured HDMI 2.1 ports, which in this price range still isn’t standard. You can therefore connect multiple consoles, a PC, or a soundbar at the same time without worrying which input supports the full picture capabilities. The TV also supports VRR, ALLM, and HGiG, so it’s hard to fault its basic feature set. One downside remains the lack of Dolby Vision, which may matter especially to Xbox Series X owners. That said, it’s not a flaw that rules out the QN80H as a gaming TV. Samsung includes a feature still missing from most manufacturers: its proprietary motion interpolator, Game Motion Plus. It’s a motion interpolator that also works in game mode, allowing you to improve the smoothness of titles running at 30 or 60 frames per second without a drastic increase in input lag. In practice, Game Motion Plus can make a much bigger difference than Dolby’s processing, especially in more demanding games that don’t offer a 60 FPS mode. The image becomes noticeably smoother while controls remain responsive enough. So despite the lack of Dolby Vision, the QN80H is still one of the best-equipped TVs for gamers in its class.