LG OLED C6 (WOLED) vs SONY BRAVIA 3 II (XR35M2)

The HDR effect on the LG C6 is really very good. LG Display's new WOLED panel primarily brought a significant increase in brightness. In our unit we measured around 1,500 nits and, importantly, the TV can show similar values in many normal movie scenes. That gives HDR the proper impact. Bright highlights, lamps, or sunlight can be really strong, and most HDR movies simply look very impressive. Of course it's still an OLED, so brightness drops in scenes with a lot of white. The fifth scene of The Meg illustrates this well, where the C6 reached about 600-700 nits. That's still a very good result, but it also shows the new panel hasn't removed all the limitations typical of OLEDs.

Colors

When it comes to color, there is also little to complain about. The C6 covers about 99% of the DCI-P3 gamut and roughly 75% of BT.2020. In practice the colors are very saturated and, importantly, stable regardless of the scene. That's worth emphasizing, because not every TV behaves the same in this respect. In some RGB Mini LED models color saturation can depend more strongly on image brightness. Today a wider color gamut is mainly offered by QD-OLED TVs and new SQD models with a new generation of quantum dots. However, the C6 still performs very strongly here and is able to generate appropriately saturated colors in most movie scenes.

Bravia 3 II is certainly not a TV that tries to impress with brightness. In our measurements it reached about 450 nits, so it's far from the strongest designs on the market. That said, HDR here is not just a paper feature. Compared with regular SDR material, the brightest parts of the image can already punch through, and reflections, highlights, or stronger exposures have a bit more energy and stand out better from the rest of the scene. You can see this best in simpler shots where many bright elements appear on screen. Then the Bravia 3 II can give a hint of a higher-dynamic-range picture. The problem only starts with more demanding content, where much greater brightness headroom is needed. There the TV quickly shows its limits and instead of strong, striking HDR we get only a correctly rendered picture.

Colors

Bravia 3 II uses a QLED-type panel, although technically it does not use a traditional quantum-dot layer. Instead Sony applied a PFS phosphor-based solution that serves a very similar role: it allows for more saturated reds and greens and thus lets the TV display a much wider color gamut. Measurements showed about 94% coverage of the DCI-P3 gamut and about 74.4% of the very wide BT.2020. Those are good results for this class of hardware, meaning the Bravia 3 II has no problem showing adequately saturated colors in HDR content. Colors don't look washed out, and the more intense shades can look really attractive.

Right out of the box the LG C6 is pretty well set up, especially if you choose Filmmaker mode. In SDR material the white balance is decent, although as brightness increases it starts to lack a bit of red. The picture becomes a little cooler as a result, but it’s not such a big difference that it stands out during normal viewing. More happens in the brightness response itself. Gamma is a bit low and instead of holding at 2.4 it sits closer to 2.1–2.2 over much of the range. In practice the C6 slightly brightens midtones. Shadows are therefore more readable, but the image loses some depth compared with how it should look in a dark room. In HDR the situation is a bit more interesting. The start of the grayscale looks very good, but from about 20–30% brightness the white balance starts to drift more and more. As brightness rises there’s more red and a noticeable lack of blue. In the brightest highlights the difference is already significant and also affects reproduction of some colors. The EOTF curve itself is handled fairly well over most of the range. The C6 only has a tendency to slightly brighten the image, which we also saw during our film comparisons. The largest deviation appears around the brightest highlights, where the TV begins to adapt the signal to the panel’s capabilities. So the out-of-the-box Filmmaker mode in HDR isn’t perfect, but overall it performs well. The biggest room for improvement is the white balance, especially at high brightness.

In Professional mode the Bravia 3 II, straight out of the box, delivers a fairly good level of color reproduction. In SDR the most noticeable issue is a slightly low gamma, which makes the midtone areas a bit brighter. White balance is not perfect either; as brightness increases there is a slight lack of blue and red, so whites can sometimes take on a slightly warmer, mildly greenish tint. However, these are not errors that immediately stand out while watching a movie. Average error values hover around 3, so the factory preset can be considered quite good. The situation is similar in HDR. Here again there is a slight deficiency in the blue component, so the image is a touch warmer than the reference, but the difference is not large enough to be significantly distracting during normal viewing.

LG TVs have been very receptive to calibration for years, and the C6 is no exception. After adjustment the white balance was set almost perfectly, and most color errors dropped to values below 3, often even around 2. In practice this means very accurate color reproduction in both SDR and HDR. An interesting detail appeared only with the HDR brightness characteristic. On a classic EOTF chart everything looks nearly ideal, and at first glance it would be hard to find fault. Only when we measured the TV’s behavior using filters based on actual movie scenes did it become clear that the C6 has a slight tendency to artificially boost image brightness.

It’s not a huge difference and many people may even see it as a positive, because HDR looks a bit more impressive this way. From the standpoint of fidelity to the source material this isn’t ideal — some scenes are simply a touch brighter than the filmmaker intended. Interestingly, this is somewhat unusual for LG. In previous generations, the brand’s TVs typically stuck very closely to the reference tone curve after calibration. With the C6 we’re still very close to the standard, but that subtle boost in brightness is indeed noticeable in films and series.

After calibration you can get a lot out of SDR content. The white balance was set almost perfectly, gamma practically matches the reference value, and average color errors fell from around 3 to about 1. That's a level at which differences from the reference image are, in practice, very hard to detect. The Bravia 3 II therefore shows that despite its position in Sony's lineup it has quite a lot of potential for precise picture tuning. Improvements are also visible in HDR, although here you can no longer work around all of the TV's limitations. After equalizing the colors it's easier to notice that the EOTF curve in film material runs slightly below the reference value in places, meaning the Bravia 3 II slightly darkens part of the image. That's not ideal from a reference standpoint, but in this particular TV it also has an advantage. With no local dimming and average black levels, this behavior slightly reduces the visibility of the backlight in darker scenes and helps maintain a greater sense of contrast. So you could say Sony partially masks the limits of the panel that way, rather than trying at all costs to stick to the reference luminance.

The LG C6 has taken a really big step forward here. The TV uses the same processor found in the flagship G6, and in terms of image processing the two models are very similar. That’s a big plus, because in this area LG’s processor this year performs excellently. The "Smooth Gradation" feature works especially well. With heavily compressed material it can effectively hide ugly tonal transitions and artifacts that often appear, for example, in lower-quality streaming. It’s best to leave it set to "Low." Then the improvement is clear, and the TV doesn’t yet start blurring fine details. Higher levels smooth the image more, but can already remove some of the natural texture of objects on the screen. The upscaling itself also performs very well. Lower-resolution content is sharpened properly, edges look clean, and the processor quite effectively rebuilds fine details. In this regard the C6 is already very close to LG’s best TVs, and the differences compared with the G6 are small.

The Bravia 3 II is Sony’s first TV to use the new MediaTek Pentonic 800 chipset, and you can see a few changes in image processing. Starting with the basics: upscaling is solid. The TV can sensibly upscale lower-resolution material and doesn’t have a strong tendency to overemphasize jagged edges or other source imperfections. With regular broadcast TV or lower-quality streaming the picture remains quite pleasing. We have more reservations about the digital image processing. In this model Sony replaced the well-known "Smooth Gradation" feature with a new setting called "Digital Noise Reduction." Its role is essentially the same: to smooth unpleasant tonal transitions and artifacts caused by heavy compression. Unfortunately, this feature performs noticeably worse than before. At the "Large" setting — the only one that noticeably affected the picture — the TV can smooth away too many image elements at once, causing film grain to disappear and surface textures or even character skin to start looking unnatural. Worse, the effect is not very consistent. When a scene contains more motion the function’s effect weakens significantly and at times it looks as if the TV stops intervening in the image altogether. For everyday viewing we therefore don’t recommend using it at a high level. It can help on a static shot, but the price is often too much loss of detail.

The LG C6 features a panel with a maximum refresh rate of 165 Hz, which is great news especially for gamers using a powerful PC. For movies, sports, or consoles we'll of course use up to 120 Hz, but even then it's hard to fault the motion clarity. As you'd expect from an OLED, the panel's response time is almost instantaneous. Moving objects therefore don't leave the characteristic smears you still see on LCD TVs. This is particularly noticeable in sports and fast-paced games, where the picture remains very clean even during dynamic motion.

For movies and TV, LG also provides the TruMotion motion-smoothing system. In the user settings you'll find two separate sliders. De-Judder is mainly for low-frame-rate content, that is primarily 24 fps films and series. It can slightly reduce the characteristic judder, or be set higher if you want a much smoother image. De-Blur is useful for higher-frame-rate material, mainly sports broadcasts and 50/60 fps television.

Motion handling is definitely one of the Bravia 3 II's strongest points. The TV uses a 120 Hz VA panel, a solution that by nature, despite the high refresh rate, doesn't always cope well with motion blur. Here Sony has managed to get that problem very well under control. Fast-moving objects remain sharp, and the characteristic trails and blurring are reduced to a very low level, if not to zero. It's one of the least smearing LCD TVs we've had the chance to test. Interestingly, in this respect the Bravia 3 II can even outperform the much more expensive flagship True RGB series: the Bravia 9 II.

LG has focused heavily on gamers for years, and the C6 really lacks nothing important. The TV supports 4K at 120 Hz from consoles, and when connected to a PC it can run up to 165 Hz. It also offers VRR from 40 to 165 Hz, ALLM, and properly working HGiG. A big plus is Dolby Vision support for games, so the Xbox Series X can use that format without sacrificing game mode. The package is rounded out by a Game Bar that lets you quickly check key signal parameters and change settings without leaving the game. In terms of features, the C6 is one of those TVs that’s really hard to find fault with. Whether you play on PlayStation, Xbox, or PC, practically everything you could expect from a modern gaming TV is available here.

Sony Bravia 3 II is a very good TV for gamers, although not everything has been handled the way we'd like. The biggest change concerns the connections. For the first time in a Sony TV we get four full HDMI 2.1 ports with 48 Gb/s bandwidth, thanks to the new MediaTek Pentonic 800 chipset. That removes one of the long-standing issues that has plagued the manufacturer's TVs. You can connect several devices at once and use each input's full capabilities, including VRR and ALLM. There's also a simple Game Bar that lets you check key signal parameters and change a few useful settings, such as black level, when you want to improve visibility in darker parts of a game.

There are, however, two limitations worth knowing. The first is the lack of support for 1440p at 120 Hz. This won't be a problem for everyone, but people using that resolution on a console or PC, for example to get higher frame rates in certain games, will have to choose 1080p. We have more reservations about HGiG support. Sony does not allow disabling tone mapping on the Bravia 3 II, so the TV continuously processes HDR content even when you would prefer to leave that task to the console. You can most easily notice this during HDR setup. The checkerboard pattern does not disappear at the point corresponding to the TV's actual capabilities. That doesn't mean HDR in games will look bad. You just need to approach the setup a bit differently and, instead of relying on the pattern, manually set the peak brightness to about 450 nits. The issue can be worked around, but you should know about it before you start configuring your console.