LG OLED C6 (WOLED) vs Philips OLED811

The HDR effect on the LG C6 is really very good. LG Display's new WOLED panel primarily brought a significant increase in brightness. In our unit we measured around 1,500 nits and, importantly, the TV can show similar values in many normal movie scenes. That gives HDR the proper impact. Bright highlights, lamps, or sunlight can be really strong, and most HDR movies simply look very impressive. Of course it's still an OLED, so brightness drops in scenes with a lot of white. The fifth scene of The Meg illustrates this well, where the C6 reached about 600-700 nits. That's still a very good result, but it also shows the new panel hasn't removed all the limitations typical of OLEDs.

Colors

When it comes to color, there is also little to complain about. The C6 covers about 99% of the DCI-P3 gamut and roughly 75% of BT.2020. In practice the colors are very saturated and, importantly, stable regardless of the scene. That's worth emphasizing, because not every TV behaves the same in this respect. In some RGB Mini LED models color saturation can depend more strongly on image brightness. Today a wider color gamut is mainly offered by QD-OLED TVs and new SQD models with a new generation of quantum dots. However, the C6 still performs very strongly here and is able to generate appropriately saturated colors in most movie scenes.

Philips OLED811 uses the new generation WOLED EX panels, also found in models like the LG C6 and Samsung S90H. After calibration we measured around 1500 nits, which is a very good result for an OLED TV. You can see it clearly in movies and series. All kinds of light flashes have the right intensity, especially when they appear on a dark background. In such scenes the OLED811 can deliver truly impressive HDR. Of course, that doesn't mean you'll see that peak brightness in every shot. When the screen is filled with a large area of white or a big explosion, brightness falls to around 600 nits. That's still a good result, but those scenes no longer have the same punch as small, bright elements on a dark background. This is a known limitation of OLEDs, and the OLED811 is no exception.

Colors

Aside from HDR brightness, colors also matter, and Philips performs very well here too. It covers almost the entire DCI-P3 gamut, which contains most of the colors used in HDR movies and series. So you get rich reds and lush greens, and while watching it's hard to find major faults in this area. It looks a bit worse with the much wider BT.2020 gamut — its most saturated shades are already beyond the reach of this panel. Added to that is the issue of the white subpixel the WOLED panel uses to help boost brightness. With very bright colors you can see some "whitening": the color is bright but loses some of its saturation. In exactly these situations QD-OLED panels from Samsung Display have the advantage. In most movies and series, however, this won't be something that immediately stands out.

Right out of the box the LG C6 is pretty well set up, especially if you choose Filmmaker mode. In SDR material the white balance is decent, although as brightness increases it starts to lack a bit of red. The picture becomes a little cooler as a result, but it’s not such a big difference that it stands out during normal viewing. More happens in the brightness response itself. Gamma is a bit low and instead of holding at 2.4 it sits closer to 2.1–2.2 over much of the range. In practice the C6 slightly brightens midtones. Shadows are therefore more readable, but the image loses some depth compared with how it should look in a dark room. In HDR the situation is a bit more interesting. The start of the grayscale looks very good, but from about 20–30% brightness the white balance starts to drift more and more. As brightness rises there’s more red and a noticeable lack of blue. In the brightest highlights the difference is already significant and also affects reproduction of some colors. The EOTF curve itself is handled fairly well over most of the range. The C6 only has a tendency to slightly brighten the image, which we also saw during our film comparisons. The largest deviation appears around the brightest highlights, where the TV begins to adapt the signal to the panel’s capabilities. So the out-of-the-box Filmmaker mode in HDR isn’t perfect, but overall it performs well. The biggest room for improvement is the white balance, especially at high brightness.

The movie mode on the Philips OLED811 is sensibly configured right out of the box. Most color errors are minor, both in SDR and HDR, so you can sit down and watch without first adjusting the settings. There are no major inaccuracies that would immediately pull attention away from the film.

It's not perfect, though. The white balance shows a slight deficiency of red compared with green, so whites and grays can have a faint greenish tint. It's not a strong cast, but measurements clearly show it. There are also small brightness deviations in SDR: some areas of the picture are slightly lifted, and the deepest blacks aren't always rendered evenly. In HDR the TV tracks the reference much more closely, although in places it slightly pulls details out of the shadows. These are generally things to refine. The factory movie mode provides a good starting point, and calibration will show how much more you can get out of it.

LG TVs have been very receptive to calibration for years, and the C6 is no exception. After adjustment the white balance was set almost perfectly, and most color errors dropped to values below 3, often even around 2. In practice this means very accurate color reproduction in both SDR and HDR. An interesting detail appeared only with the HDR brightness characteristic. On a classic EOTF chart everything looks nearly ideal, and at first glance it would be hard to find fault. Only when we measured the TV’s behavior using filters based on actual movie scenes did it become clear that the C6 has a slight tendency to artificially boost image brightness.

It’s not a huge difference and many people may even see it as a positive, because HDR looks a bit more impressive this way. From the standpoint of fidelity to the source material this isn’t ideal — some scenes are simply a touch brighter than the filmmaker intended. Interestingly, this is somewhat unusual for LG. In previous generations, the brand’s TVs typically stuck very closely to the reference tone curve after calibration. With the C6 we’re still very close to the standard, but that subtle boost in brightness is indeed noticeable in films and series.

After calibration the Philips OLED811 produces an image very close to the reference. We managed to even out the white balance and remove the subtle color cast visible in the factory settings. Errors in Color Checker measurements for SDR and HDR dropped to around 1 to 2, and many samples even fall below 1. That's a level at which it's hard to spot differences from the reference image with the naked eye. We also improved the gamma, and only in the brightest whites a slight brightening remains. In HDR the EOTF curve also stays close to the reference, although the TV still tends to slightly boost the brightness of small elements like stars or subtitles. That gives the image a bit of extra glow that shouldn't be there, but otherwise there's little to complain about. It was already good out of the box, and after calibration we managed to refine most of the remaining shortcomings.

The LG C6 has taken a really big step forward here. The TV uses the same processor found in the flagship G6, and in terms of image processing the two models are very similar. That’s a big plus, because in this area LG’s processor this year performs excellently. The "Smooth Gradation" feature works especially well. With heavily compressed material it can effectively hide ugly tonal transitions and artifacts that often appear, for example, in lower-quality streaming. It’s best to leave it set to "Low." Then the improvement is clear, and the TV doesn’t yet start blurring fine details. Higher levels smooth the image more, but can already remove some of the natural texture of objects on the screen. The upscaling itself also performs very well. Lower-resolution content is sharpened properly, edges look clean, and the processor quite effectively rebuilds fine details. In this regard the C6 is already very close to LG’s best TVs, and the differences compared with the G6 are small.

The OLED811 handles lower-quality content reasonably well, though it's far from perfect. The "Artifact Reduction" feature helps smooth tonal transitions and on the low setting delivers a pretty good result. It doesn't remove banding between shades as effectively as similar solutions from some competitors, but at least it doesn't introduce new artifacts. That's a sensible setting for everyday viewing. Still, there's some disappointment, because the MediaTek Pentonic 800 chip used here can, in other manufacturers' implementations, deal more effectively with heavy compression even at similarly low settings. A lot therefore depends on how each manufacturer uses its capabilities. We have a few more reservations about the 4K upscaling itself. There is plenty of detail, but the overall image looks fairly soft. Edges are heavily smoothed, which robs the picture of some sharpness and clarity. You can partly correct that with the sharpness slider in the menu, though that will just emphasize outlines rather than recover detail. On the plus side, there is no overscan, so even with an SD signal the TV does not crop the edges of the picture.

The LG C6 features a panel with a maximum refresh rate of 165 Hz, which is great news especially for gamers using a powerful PC. For movies, sports, or consoles we'll of course use up to 120 Hz, but even then it's hard to fault the motion clarity. As you'd expect from an OLED, the panel's response time is almost instantaneous. Moving objects therefore don't leave the characteristic smears you still see on LCD TVs. This is particularly noticeable in sports and fast-paced games, where the picture remains very clean even during dynamic motion.

For movies and TV, LG also provides the TruMotion motion-smoothing system. In the user settings you'll find two separate sliders. De-Judder is mainly for low-frame-rate content, that is primarily 24 fps films and series. It can slightly reduce the characteristic judder, or be set higher if you want a much smoother image. De-Blur is useful for higher-frame-rate material, mainly sports broadcasts and 50/60 fps television.

In terms of motion handling, the OLED811 performs excellently. At 120 Hz, which is useful for console gaming and watching sports, the image stays clear and moving objects don’t leave noticeable trails. The fast response of OLED pixels helps here; you can see it clearly in the UFO test, even on dark backgrounds. There are also motion-smoothing controls. For movies you can adjust the strength of smoothing to your taste, ranging from preserving a cinematic feel to much smoother motion. A separate motion blur reduction control is useful for fast-paced content like live sports broadcasts.

LG has focused heavily on gamers for years, and the C6 really lacks nothing important. The TV supports 4K at 120 Hz from consoles, and when connected to a PC it can run up to 165 Hz. It also offers VRR from 40 to 165 Hz, ALLM, and properly working HGiG. A big plus is Dolby Vision support for games, so the Xbox Series X can use that format without sacrificing game mode. The package is rounded out by a Game Bar that lets you quickly check key signal parameters and change settings without leaving the game. In terms of features, the C6 is one of those TVs that’s really hard to find fault with. Whether you play on PlayStation, Xbox, or PC, practically everything you could expect from a modern gaming TV is available here.

OLED811 has almost everything you could expect from a gaming TV. It supports 120 Hz at Full HD, 1440p and 4K resolutions, and when connected to a PC can reach 165 Hz. It also has VRR, which helps avoid screen tearing with variable frame rates, and ALLM, which automatically switches to game mode. So you don't have to dig into the settings every time you power up your console.

HGiG also works correctly, so once you enable HDR on the console the TV doesn't apply its own brightness adjustments. There's also a Game Bar that lets you check signal parameters and quickly change settings useful while gaming. The list even includes Dolby Vision for games, but there's a significant catch, which you'll read about below.