LG NANO81A / NANO80A vs Hisense UR8S

If you're counting on HDR in the NANO81A to bring tears to your eyes, I have to disappoint you. This TV is simply too dark to show what this format is really about. With a brightness of just 250 nits, HDR here essentially exists only on paper. In practice, during a viewing session, it's very hard to distinguish whether we're watching high dynamic range content or regular SDR – it simply lacks that "punch" of light in bright areas of the image. But, to not have all criticism, we do have a glimmer of light at the end of the tunnel – and it’s quite clear. It's about color gamut coverage. Here, the NanoCell filter shows that it's not just marketing nonsense. Our measurements indicated that the coverage of the DCI-P3 space is around 88%. This is really a solid result that positions this model significantly above typical budget models based on regular white LED lights without any filters. Of course, it's still a bit lacking compared to the level of quantum dot TVs (QLED) or advanced panels with PFS filtering, but for this price range, the colors are surprisingly saturated and vibrant. It's just a shame that this low brightness doesn’t allow them to fully "spread their wings" with the Nano filter.

UR8S is a slightly higher-end Mini-LED, so you could expect a lot in terms of brightness. And indeed, on a synthetic test pattern the peak brightness reached around 2200 nits. That's a very good result, but as always what matters more is what the TV does in normal film scenes. Here the results are a bit more uneven. In bright scenes with a lot of light on screen, the UR8S can deliver really strong HDR. Brightness then reaches about 1500 nits, so the image is very intense and has a lot of punch. It's worse with small bright elements on a dark background. The TV noticeably dims them to maintain good blacks and avoid excessive blooming. As a result, things like single stars or tiny specular highlights can be only around 200 nits. And here HDR is no longer as impressive. So the local dimming algorithm works effectively, but it comes at a cost, sometimes it simply sacrifices the brightness of small details too much in favor of contrast.

Colors

With RGB Mini-LED TVs, colors should be evaluated a bit differently than usual. If we look solely at the panel's capabilities, the UR8S performs great. We measured about 94% coverage of BT.2020 and practically full DCI-P3. These are among the highest values currently found in LCD TVs, and this is where the potential of RGB backlighting is most apparent. The problem is that this potential isn't always used in real scenes. When we ran the same measurements on patterns with an overlaid film background, the saturation of some colors dropped noticeably. Individual zones can't always control the three RGB components as precisely when the scene becomes more complex. This is most noticeable with blue and magenta. In simple test patterns they can look very strong, but in tougher scenes samples of those colors clearly shrink. So the UR8S has enormous potential, but the TV can't always make full use of it.

For every movie fan, the natural choice in LG televisions is the Filmmaker Mode. This mode is designed to display the image as the director intended – without unnecessary "enhancements." Unfortunately, in the case of our test unit NANO81A, the factory settings left something to be desired. The main issue turned out to be white balance. Measurements showed a clear deficiency of blue color, which practically translated to many scenes having a slightly yellowish, almost "too yellow" tint. The white was not perfectly clean, which detracted from the freshness of the image. Additionally, brightness management was not ideal either – the factory-set gamma was too low. The image often appeared oversaturated, as if it had been pulled too much from the shadows, losing its naturalness and depth. Fortunately, LG, even in this relatively low price segment, does not block access to advanced settings. The calibration capabilities of this model are immense, which is a big plus for those who like to "dig around" in the menu. We decided to approach the topic in our own way and see how much we could extract from this panel with professional calibration.

For evaluating out-of-the-box colors we used Filmmaker mode, which is supposed to show the image as close as possible to how the material was intended. Looking at white balance alone, the UR8S does quite well. There is no strong color cast that immediately jumps out, although as brightness increases a bit too much blue and red appear while green becomes deficient. Color errors therefore show up in measurements, but the image itself does not look bad.

We have far bigger reservations about how the UR8S manages image brightness. In SDR the gamma stays around 1.9 to 2.0 for most of the range instead of the target 2.4. In practice this simply means the image is too bright, especially in the midtones. Shadows are lifted too much, so the image loses some depth. A similar trend is visible in HDR. The EOTF curve sits above the reference value for a large portion of the range, so the UR8S again brightens the image more than it should. This is not a matter of the TV lacking brightness; it has plenty of it. The issue is how it manages that brightness. As a result, HDR material can look very striking, but not always exactly as it should.

After calibrating the NANO81A, it's a completely different television. What LG offers in terms of image enhancement tools even in such an inexpensive model deserves a big plus. We were able to completely eliminate that annoying yellowing of whites and make the colors natural, juicy, and simply "true." In SDR content (such as regular TV, YouTube, or older films), the picture now looks infinitely better – it's clear, well-balanced, and no longer strains the eyes with strange hues. It's evident that this panel has considerable potential, which is simply wasted by poor presets out of the box. However, we have one serious reservation that calibration cannot fully overcome – it's about brightness management in HDR mode. The algorithm LG uses in this model is designed very conservatively. The television deliberately dims the image in HDR to avoid overexposing an already weak black from the IPS panel. The developers faced a choice: either provide more light and accept that black will turn light gray, or reduce the brightness to maintain any contrast. They chose the latter. Nevertheless, after our adjustments, watching anything on the NANO81 is significantly better.

Hisense offers quite a few calibration options, and in SDR you can achieve a really good result with them. After calibration, the white balance is practically uniform across the entire range, and color errors drop to very low values. The UR8S can be adjusted very precisely here. HDR looks a bit different. The white balance itself can also be noticeably improved, although at the highest brightness levels larger deviations start to appear. What's most interesting, however, is the behavior of the EOTF curve. Even after it is properly set on test patterns, the UR8S can still interpret brightness its own way during movie playback. Depending on the scene, parts of the image are slightly brightened while others are darkened compared to how they should look. This shows that the algorithms responsible for backlight control have a fairly large impact on the final image. So calibration can greatly improve colors, but we can't completely "turn off" the way the UR8S manages brightness in HDR.

It often happens that cheap 4K panels mercilessly bring all the "dirt" and imperfections of lower resolution materials to light. However, in the case of the LG NANO81A, the situation is quite different. It’s a really solid performer when it comes to handling content that is far from ideal. The built-in processor does a great job with upscaling. Even older recordings look quite decent on this screen – the image is coherent, cleaned of digital noise, and simply pleasant to the eye. A big plus is the gradation reduction feature that you will find in the settings. It is exceptionally effective in combating color banding, which is a lifesaver when watching low bitrate materials, for example from some streaming services or older files from the internet. However, it is worth maintaining a certain vigilance. Since we are dealing with a less efficient chip than in LG's top models here, too aggressive an adjustment of this option can sometimes result in minor artifacts or a slight blurring of details. Despite this risk, I definitely encourage experimentation with this feature – in many cases, it can save the viewing experience and make low-quality material fully watchable.

A major advantage of the UR8S is its MediaTek Pentonic 800 processor, and digital image processing is one of this model’s strengths. The TV handles smoothing tonal transitions very well, especially with lower-quality sources. The feature responsible for this effect works effectively without overly interfering with the picture. Even at the medium setting it can noticeably reduce visible banding and unevenness without heavily blurring details. Upscaling also performs very well. Lower-resolution content is displayed cleanly, edges look natural, and the image isn’t overly sharpened. The UR8S simply copes very well with weaker signals, and in that respect it’s one of its clear strengths.

In terms of motion fluidity, the NANO81A unfortunately has a few drawbacks. The TV is based on a panel with a refresh rate of 60 Hz. If you're looking for perfect sharpness in dynamic football matches or fast-paced action games, you might feel somewhat unsatisfied. With such a low native refresh rate, fast-moving objects on the screen will always be a bit blurry.

The UR8S is equipped with a panel that has a native 180 Hz refresh rate, so it already offers great potential for smooth motion. The panel itself performs really well, though some limitations typical of VA panels are still visible. Smearing is relatively low for this type of screen, but with faster motion (especially on darker backgrounds) it can still be noticed, particularly when compared with the same image on OLED TVs.

NANO81A is unfortunately not a device designed for e-sports. The lack of support for a 120 Hz signal is a fact that users planning to purchase this model must simply come to terms with. Nevertheless, LG engineers have worked hard to squeeze the maximum capabilities out of this 60 Hz panel, offering a set of features that genuinely enhance the gaming experience. Above all, the television supports VRR technology (in the range of 48–60 Hz) and ALLM. As a result, the image remains stable and does not "tear," and the device automatically switches to low-latency mode as soon as it detects a signal from the console. Managing these settings is incredibly simple thanks to a dedicated system overlay that allows for a quick overview of parameters without leaving the game. A significant advantage is the support for the HGiG format. This solution is crucial for owners of modern consoles, as it enables the TV to correctly "understand" the intentions of game developers regarding HDR tone mapping. In practice, this helps avoid the effect of "blown out" bright spots, such as clouds or light sources, which unfortunately is a common issue in budget LCD televisions.

In terms of gamer features the UR8S performs really well. The TV supports practically everything you’d expect from a modern console or PC display. It offers ALLM, VRR, and 4K at 120 Hz. It also supports Dolby Vision in game mode, so when using an Xbox Series X you don’t have to give up that HDR format. PC gamers get even more options. The panel can run at 4K/180 Hz, and dropping to Full HD can raise the refresh rate up to 330 Hz. There’s also a Game Bar that lets you quickly view key information and change gaming-related settings. The only clear shortcoming is a proper implementation of HGiG. With it enabled the TV still interferes with HDR brightness mapping, so we don’t get the effect intended by that standard. Aside from that, the UR8S is very well prepared for both consoles and a powerful PC.