Hisense UR9S vs Philips PQS9011 / PQS9001 (The One 2026)

The Hisense UR9S is without a doubt a show of strength from the Chinese manufacturer when it comes to luminance. On a synthetic test pattern the panel reached as much as 2600 nits, which is an impressive result. But you have to clearly separate lab results from film realities. In real material the UR9S behaves much more restrained. Peak brightness in balanced scenes hovers around 1500 nits. In demanding, dark shots—where the algorithms must at the same time preserve deep blacks and precisely light small details—brightness can drop drastically, even down to around 400 nits. The gap between the chart and reality is therefore huge. This is a direct consequence of conservative local-dimming behavior. When a bright object occupies a large portion of the frame, the system can easily maintain a high luminance. But in night scenes the priority becomes protecting black levels and fighting the halo effect (unsightly glows around bright edges). To avoid degrading contrast, the TV drastically limits its light output. Even so, the UR9S can still produce a very powerful, engaging HDR effect that impresses in bright, spectacular sequences.

Color gamut coverage

On test patterns the Hisense UR9S performs excellently in terms of color. DCI-P3 coverage is nearly 100%, and BT.2020 coverage reaches 93%. Those are figures even the best QD-OLED TVs don't achieve. But again, synthetic measurements are one thing and movies and series are another. In real-world scenes the numbers fell to 93% for DCI-P3 and 81% for BT.2020. That's still great, but the advantage of RGB Mini LED is no longer as dramatic as manufacturers promise in marketing materials. You could even say their capability is now close to TVs equipped with quantum dots, the so-called QLEDs. Why does this happen? Largely, color reproduction depends on how the local dimming zones operate. When a highly saturated color appears next to white or another, more complex element, a single zone must handle both parts of the image at once. Under those conditions the backlight cannot maintain extreme saturation of a given color on the screen, because the emitted light takes on a character closer to white. Hisense refined this quite well in the UR9S, but still not enough for the TV to sustain such high color saturation in every situation.

Philips PQS9000 is a moderately bright TV; in our HDR scenes it reached roughly 450 to just over 500 nits. That's enough to notice a difference versus SDR. Sun reflections, lamps, and highlights have a bit more sparkle than on basic TVs, whose brightness often tops out around 300 nits. However, it’s not at a level where bright elements make a particularly strong impression. The biggest limitation remains contrast. Without local dimming, the TV raises the black level around a bright object when it brightens that object. That means there’s no clear separation between strong highlights and a dark background, and that contrast is what really shows off HDR. The PQS9000 offers more than the cheapest models, but despite decent brightness the effect stays fairly basic.

Colors

Philips deserves praise for the colors. Although the manufacturer labels this model QLED, a PFS phosphor is used here instead of quantum dots. That solution does not prevent good results, however. On test patterns and in measurements of film scenes we recorded about 94% DCI-P3 coverage and 75% BT.2020. For this class of TV that’s really good. In practice, it means the vast majority of colors used in HDR movies and series will have proper saturation. Lush greens and intense reds are not a major problem and add appeal to the picture. Limitations are easier to spot in some games and rarer content that uses the most saturated shades of the wide BT.2020 gamut. In those situations, displays with wider color coverage, such as SQD or RGB LED, can show more. In its price segment the PQS9000 has nothing to be ashamed of.

We tested the Hisense UR9S in Filmmaker Mode, which, by default, provides the most accurate image reproduction. In HDR content the TV performed quite well in that regard. White balance did not show large errors, and the luminance curve, though typical for Hisense, was at a reasonable level. So the image was neither overly bright nor noticeably color-shifted. The same mode fared much worse with SDR content, meaning the content we watch most often, such as broadcast TV or YouTube. White balance was strongly shifted toward red and blue, giving the image a slightly pink tint. This also affected the gamma curve. Instead of approaching the reference value of 2.4, it was closer to 2.0, which made the image look too bright, especially in midtones and darker areas. Filmmaker Mode therefore remains the best out-of-the-box choice, but it's not without flaws.

Unfortunately, the PQS9000’s factory picture settings for Film mode need some fine-tuning. In SDR the biggest issue is an excess of red in the white balance, which makes whites, grays, and skin tones too warm, sometimes even slightly pink. On top of that, the gamma runs below the target across most of its range. The TV therefore brightens midtones and highlights, making the overall image look flatter than it should.

In HDR the white balance itself is much better. Aside from minor deviations, the components stay close to each other, so there isn’t the pronounced tint seen in SDR. However, the EOTF curve shows a slight brightening of parts of the image, and the biggest issue appears in measurements of the wide color gamut. Many hues deviate significantly from the reference, with errors reaching 8–9. So the good gamut coverage we praised earlier doesn’t mean the TV hits specific colors accurately. It can display a wide color range, but out of the box it doesn’t use it very precisely.

After calibration we saw the biggest improvement in SDR mode, though we also refined the HDR picture. Hisense offers a lot of calibration settings in the TV's menu, so we could precisely correct the white balance and other image errors. The most important change was removing the pink cast that had previously been clearly visible in SDR content. After calibration the picture looks much more natural, especially in everyday content such as TV or YouTube.

Color reproduction errors on the ColorChecker chart are very small after calibration. The vast majority of colors fall below a Delta E of 2–3, meaning at a level very hard for the human eye to detect. The only thing we couldn't completely eliminate is the characteristic HDR tone mapping typical of Hisense TVs. It affects how brightness is distributed in movies and can subtly "beautify" the image, rather than strictly following the creators' intent. For a less experienced viewer this can produce a stronger "wow" effect, but it won't always fully match how the content should look.

Calibration brought a big improvement, especially in SDR material. We managed to even out the white balance and remove the previous color cast, and the Color Checker measurements now look really very good. Colors are much closer to what should be on the screen, so with regular TV or SDR movies we can be satisfied with the result. Unfortunately HDR somewhat spoils that outcome. On one hand it's limited by the panel's capabilities, since calibration won't improve contrast or replace local dimming. On the other hand there are color errors we couldn't correct because the CMS settings, that is color management, were grayed out and inactive. For that Philips loses points with us. White balance can be fine-tuned, but without access to wide color gamut controls you can't correct colors in HDR as effectively. It's a shame, because the SDR results show the potential is there, it's just not allowed to be fully used everywhere.

Digital image processing has been one of Hisense's strengths for two years, and the UR9S is no exception. The manufacturer uses the Hi-View AI Engine RGB processor, which is essentially based on the well-known MediaTek Pentonic 800 platform, previously used, among others, in the U8Q. The TV handles upscaling lower-resolution material to 4K and low-bitrate content very well, where various compression-related artifacts are common. Thanks to a feature called "Smooth and Gradient Picture", the image remains detailed without appearing overly sharpened or artificially smoothed. When watching regular TV or older, lower-quality material, the UR9S can pull a surprising amount out of them. In terms of digital image processing, this is one of the most refined LCD TVs we've had the chance to test.

The digital image processing in the Philips PQS9000 performs well, though we have a few reservations. The "Distortion Reduction" function helps smooth tonal transitions in lower-quality material, but it works quite unevenly. It can improve a section of the picture, only to, moments later and still within the same scene, seem to lose effectiveness and reintroduce banding between shades. A plus is that it doesn't remove film grain or fine noise, so the image retains its texture. We found the "Medium" setting worked best, and that's the one we recommend. The 4K upscaling itself is acceptable, though the picture is very soft. Edges are heavily smoothed, which may make the image feel less crisp to some viewers. In that case, it's worth slightly increasing the sharpness in the TV's menu, as this will make edges stand out more. Don't overdo the sharpness slider, however, or you may introduce artificial halos instead of improving the picture.

The Hisense UR9S is one of the first TVs on the market with a 4K panel and a 170 Hz refresh rate. In the larger sizes, 75 and 85 inches, that goes up to 180 Hz. Such a high refresh rate will mainly be useful to owners of very powerful PCs. We still watch movies and series mostly at 24 fps, and sports broadcasts at 50 fps, so in everyday use panel response time and the performance of motion smoothing are more important. In that respect the UR9S performs very well. Motion blur is minimal, as our UFO test also confirmed. Moving objects do not leave a pronounced trail, so the picture remains clear even in fast scenes.

In terms of motion handling, the Philips PQS9000 performs outstandingly for an LCD TV. It's not just the 144 Hz refresh rate, but above all how quickly the panel itself responds. At 120 Hz you can hardly see the typical trailing smears behind moving objects. What's especially pleasing is that this also applies to darker backgrounds, where many VA panels clearly struggle. Here motion remains clear, and Philips pleasantly surprised us in that regard. To adjust how motion is displayed there is the "Motion Style" function. It includes two sliders: "Smoothness" and "Blur Reduction," which let you tailor the effect to the content you're watching and your personal preferences. Our suggested settings are shown in the photo. Treat them as a starting point and try different levels of smoothing to see which you prefer.

The Hisense UR9S is very well prepared for gaming. All three HDMI ports are HDMI 2.1 and offer the full 48 Gb/s bandwidth. The TV supports 4K at 170 Hz, and on larger screen sizes even 180 Hz. On top of that there are VRR, ALLM, NVIDIA G-Sync and AMD FreeSync, so in terms of core features there’s little to complain about. PC gamers can also enable DLG mode. After switching the resolution to Full HD the refresh rate can increase to as much as 330 Hz. That’s probably an option for a narrow group of users, but it shows how much headroom the panel has. Hisense also added a Game Bar that lets you quickly change key settings, check the refresh rate, or enable a reticle and minimap zoom. The biggest downside remains the lack of a properly working HGiG. The TV keeps using its own tone mapping, which makes setting HDR on a console a bit more difficult. In our case values between 1500 and 2000 nits worked best, but it’s worth checking which setting still preserves all the details in the brightest parts of the image.

Gaming features

When it comes to gaming features, the Philips PQS9000 really has a lot to offer. Four HDMI 2.1 ports let you connect multiple devices without having to decide which one gets the full-capability port. Consoles can use 120 Hz in Full HD, 1440p and 4K, and a PC can also take advantage of 144 Hz at 4K or 240 Hz if you drop down to Full HD. There's also VRR, which matches the refresh rate to the frame rate and prevents screen tearing. Its range goes from 48–240 Hz, with the upper limit applying to Full HD mode.

ALLM is included, so the TV automatically switches into game mode, and HGiG works correctly, which is useful when setting up HDR on a console. There's also a Game Bar for quick access to settings and signal information. The list even includes Dolby Vision gaming, but that option is hard to enjoy because of very high latency. Apart from that caveat, the feature set is really solid.