Hisense UR8S vs Samsung The Frame 2026 (LS03H)

UR8S is a slightly higher-end Mini-LED, so you could expect a lot in terms of brightness. And indeed, on a synthetic test pattern the peak brightness reached around 2200 nits. That's a very good result, but as always what matters more is what the TV does in normal film scenes. Here the results are a bit more uneven. In bright scenes with a lot of light on screen, the UR8S can deliver really strong HDR. Brightness then reaches about 1500 nits, so the image is very intense and has a lot of punch. It's worse with small bright elements on a dark background. The TV noticeably dims them to maintain good blacks and avoid excessive blooming. As a result, things like single stars or tiny specular highlights can be only around 200 nits. And here HDR is no longer as impressive. So the local dimming algorithm works effectively, but it comes at a cost, sometimes it simply sacrifices the brightness of small details too much in favor of contrast.

Colors

With RGB Mini-LED TVs, colors should be evaluated a bit differently than usual. If we look solely at the panel's capabilities, the UR8S performs great. We measured about 94% coverage of BT.2020 and practically full DCI-P3. These are among the highest values currently found in LCD TVs, and this is where the potential of RGB backlighting is most apparent. The problem is that this potential isn't always used in real scenes. When we ran the same measurements on patterns with an overlaid film background, the saturation of some colors dropped noticeably. Individual zones can't always control the three RGB components as precisely when the scene becomes more complex. This is most noticeable with blue and magenta. In simple test patterns they can look very strong, but in tougher scenes samples of those colors clearly shrink. So the UR8S has enormous potential, but the TV can't always make full use of it.

The Frame 2026 is genuinely a bright TV. Its peak brightness reaches about 650 nits and, importantly, similar values are maintained regardless of the type of scene being displayed. So it doesn’t matter much whether we’re watching a very bright full-screen shot or just a small bright element occupying part of the screen. The backlight always has a lot of power, so bright portions of the image are strongly illuminated. That gives The Frame a solid foundation for HDR. Bright highlights can stand out, and the picture doesn’t look flat or too dark. Unfortunately, this is not a solution without compromises. Because it lacks local dimming, the TV cannot darken the blacks next to very bright elements.

This is clearly visible, among other things, in scenes 2 and 4 from our test procedure. Bright areas look intense, but at the same time the blacks around them become noticeably lifted. The picture loses depth as a result, especially when watching in the evening. For that reason The Frame performs best with HDR in bright and moderately bright scenes. There the high backlight brightness works in its favor. In darker shots the situation is the opposite.

Colors

The Frame also performs well in terms of color. It’s a QLED TV, so it can display a wide color gamut and show richly saturated colors. DCI-P3 coverage is around 94%, and BT.2020 about 72%. Those are good numbers and you can see them while watching. Colors are vivid and do not look washed out. It looks best in bright, colorful scenes. Animations or cartoons with lots of saturated hues can look really good on The Frame. In such material the TV shows one of its stronger points.

For evaluating out-of-the-box colors we used Filmmaker mode, which is supposed to show the image as close as possible to how the material was intended. Looking at white balance alone, the UR8S does quite well. There is no strong color cast that immediately jumps out, although as brightness increases a bit too much blue and red appear while green becomes deficient. Color errors therefore show up in measurements, but the image itself does not look bad.

We have far bigger reservations about how the UR8S manages image brightness. In SDR the gamma stays around 1.9 to 2.0 for most of the range instead of the target 2.4. In practice this simply means the image is too bright, especially in the midtones. Shadows are lifted too much, so the image loses some depth. A similar trend is visible in HDR. The EOTF curve sits above the reference value for a large portion of the range, so the UR8S again brightens the image more than it should. This is not a matter of the TV lacking brightness; it has plenty of it. The issue is how it manages that brightness. As a result, HDR material can look very striking, but not always exactly as it should.

To evaluate the out-of-the-box colors we chose Filmmaker Mode. If you’re encountering it for the first time, it’s a mode designed to present a movie or series as faithfully as possible. The TV then turns off most additional picture enhancers, and the colors and luminance characteristics are meant to be as close as possible to what the content creators intended. I have to admit that the The Frame 2026 already performs quite well in this regard straight out of the box. The biggest deviation is visible in the white balance. As brightness increases, blue starts to drop off and green increases slightly. As a result the image shifts toward warmer tones. White is therefore not perfectly neutral, and in some scenes you can notice a slightly warmer overall cast.

The luminance response — gamma or EOTF — looks good. Across most of the range they stay fairly close to the target, though in the darkest parts of the image there is a larger deviation. In practice, some details emerging from black may therefore appear a bit more pronounced. That said, it’s not a flaw that jumps out during normal viewing. Overall, Filmmaker Mode is a good starting point here. However, the factory image is a bit too warm and not all hues land exactly where they should.

Hisense offers quite a few calibration options, and in SDR you can achieve a really good result with them. After calibration, the white balance is practically uniform across the entire range, and color errors drop to very low values. The UR8S can be adjusted very precisely here. HDR looks a bit different. The white balance itself can also be noticeably improved, although at the highest brightness levels larger deviations start to appear. What's most interesting, however, is the behavior of the EOTF curve. Even after it is properly set on test patterns, the UR8S can still interpret brightness its own way during movie playback. Depending on the scene, parts of the image are slightly brightened while others are darkened compared to how they should look. This shows that the algorithms responsible for backlight control have a fairly large impact on the final image. So calibration can greatly improve colors, but we can't completely "turn off" the way the UR8S manages brightness in HDR.

After calibration we mainly managed to remove that warmer cast and better even out the white balance. We also smoothed the brightness response a bit, which made the image more neutral and predictable. However, there are things calibration won't fix. It's mainly the behavior of the blacks, which stems from the backlight design itself and the lack of local dimming. In some scenes blacks will therefore still be slightly lifted, and you'll just have to accept that. That's more a characteristic of this model than something that can be fixed with settings. HDR is also somewhat limited. Samsung doesn't give full freedom to work across the widest color gamut, so not all colors can be reproduced perfectly. In normal viewing you probably won't notice it, but it's worth being aware of.

A major advantage of the UR8S is its MediaTek Pentonic 800 processor, and digital image processing is one of this model’s strengths. The TV handles smoothing tonal transitions very well, especially with lower-quality sources. The feature responsible for this effect works effectively without overly interfering with the picture. Even at the medium setting it can noticeably reduce visible banding and unevenness without heavily blurring details. Upscaling also performs very well. Lower-resolution content is displayed cleanly, edges look natural, and the image isn’t overly sharpened. The UR8S simply copes very well with weaker signals, and in that respect it’s one of its clear strengths.

As with many of Samsung’s newer TVs, this one also uses the NQ4 AI processor, only the older, second-generation version. And you have to admit it handles digital image processing quite well. Lower-resolution material is sharpened effectively, and after upscaling to 4K it still looks natural. The TV can also somewhat "tidy up" weaker sources, like older recordings or lower-quality broadcasts. That doesn't, of course, mean it will suddenly turn poor footage into 4K, but at closer viewing distances the difference compared with simpler models with weaker processors is easy to spot. Edges are clearer, and fine details don't get lost as much to signal compression.

Samsung also offers a few additional image-enhancing features, but as usual it's best to use them sparingly. At stronger settings, noise reduction can very effectively reduce posterization, but it also noticeably interferes with the image. The picture then simply starts to look very artificial, for example by heavily smoothing characters' faces. So it makes the most sense with really poor sources when various types of noise are seriously distracting.

The UR8S is equipped with a panel that has a native 180 Hz refresh rate, so it already offers great potential for smooth motion. The panel itself performs really well, though some limitations typical of VA panels are still visible. Smearing is relatively low for this type of screen, but with faster motion (especially on darker backgrounds) it can still be noticed, particularly when compared with the same image on OLED TVs.

Samsung again used a panel with a maximum refresh rate of 144 Hz here. Refresh rates up to 120Hz primarily offer more headroom for material with a lot of motion. The TV can use additional motion interpolation systems that can improve smoothness in sports and other fast-moving content. However, a high refresh rate alone does not solve everything. The Frame still uses a VA panel, which has a relatively slow response time, and consequently fairly pronounced motion blur. With fast-moving objects, especially on a dark background, motion trails are easy to notice. There's also a slight doubling of edges, which can be visible even with the additional motion processing systems turned off. We already saw similar behavior in last year’s The Frame 2025, and it’s a pity Samsung hasn’t fixed that element. The 144 Hz itself provides a good foundation, but the panel’s response time still limits this TV.

In terms of gamer features the UR8S performs really well. The TV supports practically everything you’d expect from a modern console or PC display. It offers ALLM, VRR, and 4K at 120 Hz. It also supports Dolby Vision in game mode, so when using an Xbox Series X you don’t have to give up that HDR format. PC gamers get even more options. The panel can run at 4K/180 Hz, and dropping to Full HD can raise the refresh rate up to 330 Hz. There’s also a Game Bar that lets you quickly view key information and change gaming-related settings. The only clear shortcoming is a proper implementation of HGiG. With it enabled the TV still interferes with HDR brightness mapping, so we don’t get the effect intended by that standard. Aside from that, the UR8S is very well prepared for both consoles and a powerful PC.

In terms of gaming features, The Frame is practically on par with Samsung's top TVs. When you connect a console the TV automatically switches to game mode thanks to ALLM, so you don't have to change settings manually each time. There's also VRR, which matches the display's refresh rate to the frames being produced by the console or PC. During drops in smoothness this helps avoid the characteristic screen tearing. The Frame of course supports 4K at 120 Hz, so you can take advantage of the PlayStation 5 or Xbox Series X in games that offer higher frame rates. HGiG also works correctly. With HDR set up properly on the console the TV doesn't try to brighten the image on its own, so bright effects in games are shown as they should be. Samsung also includes a Game Bar. It's a handy menu you can bring up without leaving the game. There you can check things like VRR and the current frame rate, and quickly change the most important gaming settings. For PC use the options are even greater, since the mentioned Full HD mode allows raising the refresh rate up to 240 Hz. There is really only one feature missing that Samsung has already spoiled us with, and that's Dolby Vision Gaming. Xbox owners will notice this the most, because that console can use Dolby Vision in games. There's one more thing worth mentioning that applies specifically to this model. Its One Connect module has only one HDMI 2.1 port, so that's the only port you can use for a console or PC if you want 4K 120 Hz. Fortunately Samsung didn't tie that port to eARC. You can therefore connect a soundbar separately (3) and still have a full HDMI 2.1 port available for the console.