Hisense S7NQ CanvasTV vs Sony BRAVIA 2 II (S25M2)

When it comes to the brightness of the television and how it handles bright elements while watching movies, it is just average—similar to contrast. The average brightness level of the Hisense S7NQ is around 500 nits. This is a value that allows you to feel the beginnings of true HDR, but it is definitely too little to speak of outstanding effects. However, the television deserves praise for color gamut coverage—movies look very colorful and vibrant. With the use of PFS LED (QLED) coating, the device can cover over 90% of the DCI-P3 color gamut and over 72% of the wider BT.2020 gamut. For a television in this class, these are truly very good results.

Sony Bravia 2 II is not a very bright TV and unfortunately that is immediately apparent in HDR. In our measurements brightness stayed around 300 to 330 nits, which is definitely too low for the brightest parts of the picture to look truly impressive. In practice HDR here does not differ that much from ordinary SDR. Bright highlights, the sun, or lamps are of course visible, but they lack the intensity you would expect from HDR material. The Bravia 2 II therefore performs much better with regular SDR content, and it is in that use case that its limited brightness will be least noticeable.

Color gamut coverage

Sony Bravia 2 II also doesn't impress when it comes to colors. The TV doesn't use any additional gamut-expanding filter, such as the quantum dots found in QLED TVs or a PFS phosphor layer. In our measurements DCI-P3 coverage was about 78%, and the very wide BT.2020 around 57%. That's definitely too little to talk about truly saturated colors in HDR content. More intense reds, greens, or turquoise hues will simply be less striking than on TVs with an expanded color gamut. The Bravia 2 II therefore fares much better with standard Rec.709, the gamut used for movies, series, and TV in SDR.

Let's now check how the Hisense S7NQ CanvasTV performs in color reproduction in the best factory mode, which is Filmmaker. Right from the start, it is evident that it is definitely better than in dynamic or standard mode, but there are still a few things to nitpick. In terms of image quality from the HD signal, the colors are slightly inaccurate – there is a dominance of cooler shades of blue and a lack of red. Because of this, the image appears somewhat too cool.

A similar effect occurs with 4K content, but it is more noticeable there. The excessive exposure of blue tones and the lack of red make the image seem distinctly cold. However, the biggest issue with this television is not the colors themselves but rather the way brightness is managed. The tested unit slightly boosted the brightness compared to the reference value. The result is indeed better visibility of details, but at the cost of significantly brightened black – which makes the entire image seem more "flat."

A similar phenomenon was noticed in the 4K signal – the slightly inflated curve at the beginning of the EOTF graph shows that the television has a tendency to excessively expose certain scenes. Fortunately, this effect can be improved with professional calibration, which we will discuss in the next point.

Out-of-the-box color reproduction in Cinema mode was really good, at least for ordinary SDR material. The Bravia 2 II had a slight tendency to boost reds, so some colors skewed a bit warmer, at times with a faint pinkish tint. However, it wasn't a major fault, and during normal viewing the picture still looked quite natural. There was a bit more going on with image brightness. Looking at the gamma trace, you can see Sony doesn't stick exactly to the reference value. The darkest parts are slightly lifted, while as brightness increases the gamma gradually rises and a larger portion of the image becomes darker than it should. That said, the difference isn't large enough to seriously interfere with everyday viewing. Overall, SDR straight out of the box performs pretty well.

The situation is much worse in HDR. We already mentioned the limited color gamut, but the Bravia 2 II also manipulates image brightness quite aggressively here. The EOTF curve sits below the reference for a large part of the range, which means the TV renders most midtones and brighter parts of the scene darker than the source material intends. Only toward the very end of the range does the curve flatten out, as the panel reaches the limits of its capabilities. Combined with a peak brightness of around 300 nits, this results in HDR that not only lacks punch but can simply look too dim.

The results we achieved after calibrating the Hisense S7NQ are really very good. Thanks to the calibration, we were able to eliminate the excessive exposure of blue tones and the lack of red in the HD signal. A similar, although slightly weaker effect was also achieved with 4K HDR content. Brightness management in HD material has also improved – the television no longer has problems with overall image brightness issues.

However, there are things that cannot be overlooked. The characteristic of the EOTF curve has practically not changed, and the lack of local dimming means that the smallest elements on the screen will always be slightly overexposed. One simply has to accept this when choosing a television with a similar type of backlighting. Nonetheless, the final result is very good and should fully satisfy the vast majority of users.

Calibration did a lot for the Bravia 2 II, especially with SDR content. Above all, we were able to even out the white balance and tidy up the gamma, which now sticks much closer to reference values. As a result, the picture no longer has the previous pink tint, and the brightness of individual areas is much better balanced. You can also see this in the color errors, which dropped to a very low level after calibration (with minor issues in the most saturated reds).

We also partially tamed the Bravia 2 II in HDR, particularly in how the TV manages image brightness. However, there is one thing no calibration can fix: the panel's inherent limitations. The narrow color gamut means the TV physically cannot reproduce the most saturated colors present in HDR content. On top of that, the IPS panel's low contrast leaves darker scenes veiled by a grayish glow, causing colors to lose some of their depth. So we can improve how the Bravia 2 II uses its capabilities, but unfortunately we can't overcome the panel's fundamental limits.

It is equally important how the television handles tonal transitions on a poorer signal – for example, in older movies, television, or on YouTube. Unfortunately, despite the presence of the "Smooth and Gradient Picture" feature, which was supposedly intended to improve this aspect, its performance is truly lacking. It is barely noticeable that it has any real impact on the visibility of color transitions.

Image scaling also performs poorly. Yes, one can observe that the television tries to "stretch" the quality, but the final effect is far from ideal. The image often appears slightly jagged, which is especially noticeable in the case of tree branches in the background. Additionally, the Hisense S7NQ has a clear tendency to crop the image at lower resolutions, which can cause us to miss captions in the news or finer details of the image.

Upscaling in the Bravia 2 II performs quite well, and in that respect the TV maintains the standard Sony has accustomed us to. Lower-resolution content is sensibly scaled to 4K, with the image slightly smoothed and without over-sharpening edges. It’s a different story when it comes to improving content with visible compression. That’s handled by the "Digital Noise Reduction" feature, which on the "High" setting can indeed smooth out some ugly tonal banding. The problem is it does so fairly aggressively, removing a lot of fine detail along with the imperfections, including natural film grain. Moreover, when there’s more motion on screen its effectiveness drops significantly and the improvement becomes minimal. So we generally avoided using this feature in everyday viewing.

When it comes to motion fluidity, the television performs really well. Although the S7NQ was mainly designed for displaying static elements – such as images – the manufacturer has utilized a panel with a refresh rate of 144 Hz. As a result, sports or games look really good on it.

For materials that are not recorded at a high frame rate, the manufacturer provided two features that allow you to adjust the picture to your own preferences. "Motion blur reduction" and "motion smoothing" operate on a 10-level scale, allowing you to choose between a more cinematic image – with characteristic frame jumps – and a smooth effect reminiscent of a "soap opera." How to set this up? That's a personal matter – we leave the decision to you.

The Bravia 2 II uses a 60 Hz panel and, given its capabilities, handles motion quite well. However, keep in mind this is a basic panel, and its limitations are already noticeable, especially with sports. The TV cannot interpolate 50/60 fps content to a higher refresh rate, so it can't further improve the sharpness of fast-moving objects. For movies and series, you get a standard motion smoother that can reduce the characteristic judder of material shot at 24 fps.

Even though the S7NQ is an "image" type TV, you can actually play games on it. Really. It has almost everything (except for HGiG mode) that a modern gaming TV needs. The 144 Hz panel and two full-fledged HDMI 2.1 ports allow for seamless connection of two consoles, such as PlayStation 5 or Xbox Series X/S.

The TV supports automatic game mode (ALLM) and frame synchronization (VRR) without any stuttering or issues. It also handles high frame rates at lower resolutions without a hitch. We must commend Hisense for the very attractive Game Bar – it displays all available picture options, and additionally, we have the ability to zoom in on the mini-map or enable a crosshair (because sometimes someone might actually want to "aim" 😉).

The only missing element – as we mentioned earlier – is the lack of a proper implementation of HGiG mode. It is responsible for automatically setting the picture in games as the creators intended. It's a shame because that’s the only thing separating the Hisense S7NQ from being a full-fledged gaming "monster."

The Bravia 2 II is not a TV particularly well suited for gaming, and the feature list makes that clear pretty quickly. You basically only get automatic low-latency mode (ALLM) and a simple Game Bar where you can view basic signal information and change a few settings. But that's where the list of advantages ends. The TV doesn't support VRR or 120 Hz (not even at lower resolutions), and on top of that it has problems with a proper implementation of the HDR HGIG format. It can, of course, be used for occasional console gaming, and thanks to low input lag controls stay responsive, but if you're mainly looking for a TV for gaming, the Bravia 2 II will simply be a very limited choice.