Hisense S7NQ CanvasTV vs Philips OLED770

When it comes to the brightness of the television and how it handles bright elements while watching movies, it is just average—similar to contrast. The average brightness level of the Hisense S7NQ is around 500 nits. This is a value that allows you to feel the beginnings of true HDR, but it is definitely too little to speak of outstanding effects. However, the television deserves praise for color gamut coverage—movies look very colorful and vibrant. With the use of PFS LED (QLED) coating, the device can cover over 90% of the DCI-P3 color gamut and over 72% of the wider BT.2020 gamut. For a television in this class, these are truly very good results.

The Philips OLED770 does not attempt to compete with the brightest OLEDs on the market, and it would actually be hard to expect that, as it is the lowest model in Philips's series for 2025. In our measurements, it achieved a maximum brightness of about 700 nits, which allows for enjoyment of HDR effects in scenes where light appears point-wise – for example, in the flash of headlights or a starry sky. In such moments, the picture can truly impress. However, it is different when there are more bright elements on the screen. The television, like many cheaper OLEDs, limits brightness in those cases, and the entire picture noticeably dims. This was best seen in a scene from the movie The Meg, where the sun rises behind an oil rig – at that point, the brightness dropped to about 250 nits, nearly three times less. The HDR effect remains visually pleasing, but it is worth being aware that this model performs best in scenes with less intense light. Fortunately, the OLED770 has an ace up its sleeve – the coverage of the DCI-P3 color palette is as high as 99%, so colors in movies and games are saturated and very close to what the creator intended to convey.

Let's now check how the Hisense S7NQ CanvasTV performs in color reproduction in the best factory mode, which is Filmmaker. Right from the start, it is evident that it is definitely better than in dynamic or standard mode, but there are still a few things to nitpick. In terms of image quality from the HD signal, the colors are slightly inaccurate – there is a dominance of cooler shades of blue and a lack of red. Because of this, the image appears somewhat too cool.

A similar effect occurs with 4K content, but it is more noticeable there. The excessive exposure of blue tones and the lack of red make the image seem distinctly cold. However, the biggest issue with this television is not the colors themselves but rather the way brightness is managed. The tested unit slightly boosted the brightness compared to the reference value. The result is indeed better visibility of details, but at the cost of significantly brightened black – which makes the entire image seem more "flat."

A similar phenomenon was noticed in the 4K signal – the slightly inflated curve at the beginning of the EOTF graph shows that the television has a tendency to excessively expose certain scenes. Fortunately, this effect can be improved with professional calibration, which we will discuss in the next point.

The first measurements already show that the factory settings of the Philips OLED770 have a lot to improve even in Filmmaker mode. The white balance chart clearly shows a lack of blue, which gives the image a slightly yellowish tint. In practice, the white is not snow-white, but leans towards warmer hues – which some may even like, but from the accuracy perspective, this is a deviation from the norm. The gamma, on the other hand, tends to be on the darker side – the average value is about 2.6 instead of the reference 2.4. In the mid-tones, the image appears muted and more saturated, which may look too "filmic," but takes away some naturalness. However, the biggest issues can be seen in color reproduction. The average error is relatively high, and some colors – especially shades of gray – clearly deviate from what should be seen. In everyday viewing, this means that sometimes colors may look less natural than we would wish.

The results we achieved after calibrating the Hisense S7NQ are really very good. Thanks to the calibration, we were able to eliminate the excessive exposure of blue tones and the lack of red in the HD signal. A similar, although slightly weaker effect was also achieved with 4K HDR content. Brightness management in HD material has also improved – the television no longer has problems with overall image brightness issues.

However, there are things that cannot be overlooked. The characteristic of the EOTF curve has practically not changed, and the lack of local dimming means that the smallest elements on the screen will always be slightly overexposed. One simply has to accept this when choosing a television with a similar type of backlighting. Nonetheless, the final result is very good and should fully satisfy the vast majority of users.

Philips OLED770 has shown signs from the beginning that it houses significant potential, but it was difficult to fully see this in the factory settings. The image was sometimes too warm, and some colors seemed to have lost their naturalness along the way. However, calibration revealed that it is a television very receptive to adjustments – it reacted to every correction and almost immediately unveiled another layer of its capabilities. The white balance was successfully set both in SDR and HDR, eliminating the yellowish glow and presenting a neutral, clear white. Gamma stabilized closer to perfection, allowing midtones to regain their naturalness, and shadows no longer appeared artificially darkened, possibly even with a slight brightening effect. The effect was obvious... Movies are watched with greater ease; the image has cinematic depth, but without the feeling that something is exaggeratedly darkened. However, the most interesting part was the work on colors. Out of the box, the errors were not dramatic but slightly noticeable – skin tones were sometimes too warm, and gray didn’t always have the shade we expected. After calibration, the error values dropped to around 2, and in many cases even below 1. This is a level significantly lower than the threshold of perception for the human eye. In other words, after correction, the colors finally “clicked” into place. Looking at the screen, we had the impression that the television had begun to speak with a full voice. Like an instrument that has finally been well-tuned.

It is equally important how the television handles tonal transitions on a poorer signal – for example, in older movies, television, or on YouTube. Unfortunately, despite the presence of the "Smooth and Gradient Picture" feature, which was supposedly intended to improve this aspect, its performance is truly lacking. It is barely noticeable that it has any real impact on the visibility of color transitions.

Image scaling also performs poorly. Yes, one can observe that the television tries to "stretch" the quality, but the final effect is far from ideal. The image often appears slightly jagged, which is especially noticeable in the case of tree branches in the background. Additionally, the Hisense S7NQ has a clear tendency to crop the image at lower resolutions, which can cause us to miss captions in the news or finer details of the image.

The problem of the previously mentioned color connections can largely be mitigated by the "distortion reduction" feature, which is an algorithm for smoothing tonal transitions in Philips TVs. It works best at a low setting—effectively eliminating unwanted color bands while not introducing strange artifacts or losing image detail. It's one of those features that is truly worth keeping switched on.

The issue with upscaling is somewhat less favorable. The image from a lower resolution can be too soft, while at the same time, distinctive "jaggies" appear in certain areas. The impression is that the algorithm is trying to reconcile two contradictory directions—smoothing and sharpening—and ultimately hasn't found the golden mean. As a consolation, it's worth noting that the television has no issues with overscan, meaning it doesn't cut off the edges of the image, which sometimes happens with other competing models.

When it comes to motion fluidity, the television performs really well. Although the S7NQ was mainly designed for displaying static elements – such as images – the manufacturer has utilized a panel with a refresh rate of 144 Hz. As a result, sports or games look really good on it.

For materials that are not recorded at a high frame rate, the manufacturer provided two features that allow you to adjust the picture to your own preferences. "Motion blur reduction" and "motion smoothing" operate on a 10-level scale, allowing you to choose between a more cinematic image – with characteristic frame jumps – and a smooth effect reminiscent of a "soap opera." How to set this up? That's a personal matter – we leave the decision to you.

The issue of the panel in the Philips OLED770 is not entirely straightforward. The manufacturer claims a 120 Hz panel, but our measurements showed that the screen can accept a 4K signal even at 144 Hz. This sounds like great news – because who wouldn't want an extra mode for PC gaming at this price? However, the reality turned out to be more complex. With 120 Hz materials, the television behaves like most OLEDs – the picture is absolutely clear, with no trace of ghosting or blurring, making it ideal for both fast-paced games and sports broadcasts. The problem arises only at 144 Hz. Unlike models with official support for that frequency, here we observe the phenomenon of so-called frame skipping. This means that the television is unable to display all frames – some of them are skipped, causing the motion to lose fluidity, and double outlines appear on the screen. The effect resembles the operation of the BFI function, which Philips does not offer in this model anyway.

Even though the S7NQ is an "image" type TV, you can actually play games on it. Really. It has almost everything (except for HGiG mode) that a modern gaming TV needs. The 144 Hz panel and two full-fledged HDMI 2.1 ports allow for seamless connection of two consoles, such as PlayStation 5 or Xbox Series X/S.

The TV supports automatic game mode (ALLM) and frame synchronization (VRR) without any stuttering or issues. It also handles high frame rates at lower resolutions without a hitch. We must commend Hisense for the very attractive Game Bar – it displays all available picture options, and additionally, we have the ability to zoom in on the mini-map or enable a crosshair (because sometimes someone might actually want to "aim" 😉).

The only missing element – as we mentioned earlier – is the lack of a proper implementation of HGiG mode. It is responsible for automatically setting the picture in games as the creators intended. It's a shame because that’s the only thing separating the Hisense S7NQ from being a full-fledged gaming "monster."

If someone is looking for a gaming TV, the Philips OLED770 is a candidate that's hard to ignore. The mere fact that we have an OLED here provides a great starting point – perfect blacks and infinite contrast make evening sessions in atmospheric games look like they’ve been pulled straight from the cinema. On top of that, there’s the Ambilight system, which features LEDs on the back of the TV that extend the image onto the wall behind the screen. The effect is such that even regular gameplay in FIFA can look like a small spectacle, and in horror games, the atmosphere becomes really intense. On the technical side, it’s pretty good as well. The Philips OLED770 supports Variable Refresh Rate (VRR) up to 120 Hz, has an automatic low latency mode for gamers (ALLM), and if someone is using an Xbox Series X, they can also count on Dolby Vision support in games. You just need to know that in this mode, input lag is slightly higher than standard, although still at an acceptable level. As a bonus, we get the “Game Bar” panel, which is a special tool strip for gamers. It's not the most conveniently designed solution, but it allows you to check key parameters without leaving the game. In total, this presents a picture of a TV that on one hand has all the most important gaming features, and on the other can add something unique – Ambilight. And it’s this mix of technology and visual effect that makes the OLED770 one of the better screens for gaming in a home environment.