Hisense A7NQ vs Sony BRAVIA 2 II (S25M2)

We checked how the Hisense A7NQ performs with HDR, and there are no surprises here. The luminance chart showed a maximum brightness of 370 nits. The result? Exactly what one could expect – average. At a brightness of around 350 nits, HDR does not stand out particularly compared to SDR. A subtle difference can be seen in more brightly lit scenes, but it’s not a jaw-dropping effect. As for the coverage of the wide colour gamut, the result was 92% for DCI-P3 and 70.2% for BT.2020. These are decent values for a TV in this class that uses a PFS coating – the same one that is sometimes promoted as QLED. The colours look good, but let’s not expect anything that competes with the best screens on the market. HDR on the Hisense A7NQ is more of an addition than a "game changer." For those looking for solid picture quality on a moderate budget – absolutely acceptable. However, if we expect full HDR capabilities, it is worth looking at higher-end models.

Sony Bravia 2 II is not a very bright TV and unfortunately that is immediately apparent in HDR. In our measurements brightness stayed around 300 to 330 nits, which is definitely too low for the brightest parts of the picture to look truly impressive. In practice HDR here does not differ that much from ordinary SDR. Bright highlights, the sun, or lamps are of course visible, but they lack the intensity you would expect from HDR material. The Bravia 2 II therefore performs much better with regular SDR content, and it is in that use case that its limited brightness will be least noticeable.

Color gamut coverage

Sony Bravia 2 II also doesn't impress when it comes to colors. The TV doesn't use any additional gamut-expanding filter, such as the quantum dots found in QLED TVs or a PFS phosphor layer. In our measurements DCI-P3 coverage was about 78%, and the very wide BT.2020 around 57%. That's definitely too little to talk about truly saturated colors in HDR content. More intense reds, greens, or turquoise hues will simply be less striking than on TVs with an expanded color gamut. The Bravia 2 II therefore fares much better with standard Rec.709, the gamut used for movies, series, and TV in SDR.

When testing the Hisense A7NQ in Filmmaker mode, we hoped for compliance with the manufacturer's assumptions, but unfortunately, the reality looks different. The main issue, as with most TVs, is the white balance. In the case of the A7NQ, we noticed a clear dominance of blue, which affected both lower-quality materials and 4K HDR content. The Color Checker test results confirm this, and the comparison images speak for themselves – the main actress appears cool and pale in "factory" mode. It looks as if she has been stripped of life.

Regarding brightness characteristics, both gamma and the EOTF curve show that the image is excessively bright. As a result, everything seems flat, lacking depth and contrast. This state of affairs definitely does not work in favour of the A7NQ and makes the viewing experience in factory mode leave much to be desired. If we expect natural colour reproduction and appropriate image depth, the A7NQ in Filmmaker mode is unlikely to impress us. It is a TV that requires significant adjustment to extract its potential.

Out-of-the-box color reproduction in Cinema mode was really good, at least for ordinary SDR material. The Bravia 2 II had a slight tendency to boost reds, so some colors skewed a bit warmer, at times with a faint pinkish tint. However, it wasn't a major fault, and during normal viewing the picture still looked quite natural. There was a bit more going on with image brightness. Looking at the gamma trace, you can see Sony doesn't stick exactly to the reference value. The darkest parts are slightly lifted, while as brightness increases the gamma gradually rises and a larger portion of the image becomes darker than it should. That said, the difference isn't large enough to seriously interfere with everyday viewing. Overall, SDR straight out of the box performs pretty well.

The situation is much worse in HDR. We already mentioned the limited color gamut, but the Bravia 2 II also manipulates image brightness quite aggressively here. The EOTF curve sits below the reference for a large part of the range, which means the TV renders most midtones and brighter parts of the scene darker than the source material intends. Only toward the very end of the range does the curve flatten out, as the panel reaches the limits of its capabilities. Combined with a peak brightness of around 300 nits, this results in HDR that not only lacks punch but can simply look too dim.

The Hisense A7NQ offers several tools that allow you to improve image quality, so we decided to take matters into our own hands and "dig around" in the settings a bit. Thanks to professional tools and measurements, we managed to correct the white balance, eliminating the excessive dominance of blue colour in both HD and 4K materials. This is a significant step forward, as in the Color Checker test, colour reproduction errors in lower-quality content dropped to a much more acceptable level. Unfortunately, 4K materials are still far from ideal – colour distortions are considerable and stem from the limitations of the television.

As for gamma, we managed to significantly reduce the excessive brightness of the image set after setting it to the correct level. However, the issue with brightness characteristics in 4K content remains unresolved – the EOTF curve still shows excessive illumination of the entire screen. It is possible that a proper implementation of dynamic tone mapping could help here, but as we mentioned earlier, this feature on the Hisense A7NQ works rather poorly instead of being helpful. Nevertheless, calibration significantly improved the overall image perception. The director's vision is now much better conveyed than in the factory settings, which more demanding viewers will certainly appreciate.

Calibration did a lot for the Bravia 2 II, especially with SDR content. Above all, we were able to even out the white balance and tidy up the gamma, which now sticks much closer to reference values. As a result, the picture no longer has the previous pink tint, and the brightness of individual areas is much better balanced. You can also see this in the color errors, which dropped to a very low level after calibration (with minor issues in the most saturated reds).

We also partially tamed the Bravia 2 II in HDR, particularly in how the TV manages image brightness. However, there is one thing no calibration can fix: the panel's inherent limitations. The narrow color gamut means the TV physically cannot reproduce the most saturated colors present in HDR content. On top of that, the IPS panel's low contrast leaves darker scenes veiled by a grayish glow, causing colors to lose some of their depth. So we can improve how the Bravia 2 II uses its capabilities, but unfortunately we can't overcome the panel's fundamental limits.

The Hisense A7NQ impresses with smooth tonal transitions in 4K materials, but unfortunately, there is no feature here that would improve this aspect in older materials of lower quality. In such cases, colour merging becomes more visible, which can somewhat spoil the viewing experience, especially in scenes with a lot of gradients.

When it comes to upscaling, the TV performs surprisingly well. The image is clearly improved, although it does come with some compromises. One can notice that the TV adds a bit of artificial sharpness, and elements in the background, such as branches, tend to exhibit slight "jagginess." These are details, however, that will mainly catch the eye of those who pay attention to such nuances.

Upscaling in the Bravia 2 II performs quite well, and in that respect the TV maintains the standard Sony has accustomed us to. Lower-resolution content is sensibly scaled to 4K, with the image slightly smoothed and without over-sharpening edges. It’s a different story when it comes to improving content with visible compression. That’s handled by the "Digital Noise Reduction" feature, which on the "High" setting can indeed smooth out some ugly tonal banding. The problem is it does so fairly aggressively, removing a lot of fine detail along with the imperfections, including natural film grain. Moreover, when there’s more motion on screen its effectiveness drops significantly and the improvement becomes minimal. So we generally avoided using this feature in everyday viewing.

The Hisense A7NQ is equipped with a 60 Hz matrix, meaning dynamic scenes – for example, in sports or games – are somewhat average here. This is standard for this level of TV, but it must be admitted that watching more intense, fast-moving content can leave a lot to be desired. However, when it comes to movies, the TV offers a motion smoothing feature that operates on a 10-level scale. The "motion blur reduction" option allows you to adjust the fluidity of the image to your own preferences. At the lowest setting, you get a natural film frame rate, which will please cinema purists. On the other hand, the maximum setting provides a very smooth, theatrical image that may appeal to those who prefer a more "smoothed out" motion.

The Bravia 2 II uses a 60 Hz panel and, given its capabilities, handles motion quite well. However, keep in mind this is a basic panel, and its limitations are already noticeable, especially with sports. The TV cannot interpolate 50/60 fps content to a higher refresh rate, so it can't further improve the sharpness of fast-moving objects. For movies and series, you get a standard motion smoother that can reduce the characteristic judder of material shot at 24 fps.

Hisense A7NQ is a device that can pleasantly surprise gamers, although it is not without its faults. The fact that we have a 60 Hz panel immediately suggests that the TV is not designed for the most demanding gaming scenarios. The motion blur we described earlier can also be a hindrance, especially in dynamic games.

However, there are several things worth praising. The TV supports ALLM (Auto Low Latency Mode) and VRR (Variable Refresh Rate), which are not always standard in this price range. The biggest surprise, however, is that the A7NQ can display images at 120 Hz – although only in Full HD resolution, it is still a significant nod to gamers. This allows a choice between smoothness and resolution, which is not obvious in TVs at this price point.

A nice addition is the Game Bar, which is clear and practical – all the main features are at hand without digging through the settings. However, there is a lack of support for HGiG, which may be disappointing for gamers looking for perfect HDR in games.

The Bravia 2 II is not a TV particularly well suited for gaming, and the feature list makes that clear pretty quickly. You basically only get automatic low-latency mode (ALLM) and a simple Game Bar where you can view basic signal information and change a few settings. But that's where the list of advantages ends. The TV doesn't support VRR or 120 Hz (not even at lower resolutions), and on top of that it has problems with a proper implementation of the HDR HGIG format. It can, of course, be used for occasional console gaming, and thanks to low input lag controls stay responsive, but if you're mainly looking for a TV for gaming, the Bravia 2 II will simply be a very limited choice.