Hisense A7NQ vs Philips OLED770

We checked how the Hisense A7NQ performs with HDR, and there are no surprises here. The luminance chart showed a maximum brightness of 370 nits. The result? Exactly what one could expect – average. At a brightness of around 350 nits, HDR does not stand out particularly compared to SDR. A subtle difference can be seen in more brightly lit scenes, but it’s not a jaw-dropping effect. As for the coverage of the wide colour gamut, the result was 92% for DCI-P3 and 70.2% for BT.2020. These are decent values for a TV in this class that uses a PFS coating – the same one that is sometimes promoted as QLED. The colours look good, but let’s not expect anything that competes with the best screens on the market. HDR on the Hisense A7NQ is more of an addition than a "game changer." For those looking for solid picture quality on a moderate budget – absolutely acceptable. However, if we expect full HDR capabilities, it is worth looking at higher-end models.

The Philips OLED770 does not attempt to compete with the brightest OLEDs on the market, and it would actually be hard to expect that, as it is the lowest model in Philips's series for 2025. In our measurements, it achieved a maximum brightness of about 700 nits, which allows for enjoyment of HDR effects in scenes where light appears point-wise – for example, in the flash of headlights or a starry sky. In such moments, the picture can truly impress. However, it is different when there are more bright elements on the screen. The television, like many cheaper OLEDs, limits brightness in those cases, and the entire picture noticeably dims. This was best seen in a scene from the movie The Meg, where the sun rises behind an oil rig – at that point, the brightness dropped to about 250 nits, nearly three times less. The HDR effect remains visually pleasing, but it is worth being aware that this model performs best in scenes with less intense light. Fortunately, the OLED770 has an ace up its sleeve – the coverage of the DCI-P3 color palette is as high as 99%, so colors in movies and games are saturated and very close to what the creator intended to convey.

When testing the Hisense A7NQ in Filmmaker mode, we hoped for compliance with the manufacturer's assumptions, but unfortunately, the reality looks different. The main issue, as with most TVs, is the white balance. In the case of the A7NQ, we noticed a clear dominance of blue, which affected both lower-quality materials and 4K HDR content. The Color Checker test results confirm this, and the comparison images speak for themselves – the main actress appears cool and pale in "factory" mode. It looks as if she has been stripped of life.

Regarding brightness characteristics, both gamma and the EOTF curve show that the image is excessively bright. As a result, everything seems flat, lacking depth and contrast. This state of affairs definitely does not work in favour of the A7NQ and makes the viewing experience in factory mode leave much to be desired. If we expect natural colour reproduction and appropriate image depth, the A7NQ in Filmmaker mode is unlikely to impress us. It is a TV that requires significant adjustment to extract its potential.

The first measurements already show that the factory settings of the Philips OLED770 have a lot to improve even in Filmmaker mode. The white balance chart clearly shows a lack of blue, which gives the image a slightly yellowish tint. In practice, the white is not snow-white, but leans towards warmer hues – which some may even like, but from the accuracy perspective, this is a deviation from the norm. The gamma, on the other hand, tends to be on the darker side – the average value is about 2.6 instead of the reference 2.4. In the mid-tones, the image appears muted and more saturated, which may look too "filmic," but takes away some naturalness. However, the biggest issues can be seen in color reproduction. The average error is relatively high, and some colors – especially shades of gray – clearly deviate from what should be seen. In everyday viewing, this means that sometimes colors may look less natural than we would wish.

The Hisense A7NQ offers several tools that allow you to improve image quality, so we decided to take matters into our own hands and "dig around" in the settings a bit. Thanks to professional tools and measurements, we managed to correct the white balance, eliminating the excessive dominance of blue colour in both HD and 4K materials. This is a significant step forward, as in the Color Checker test, colour reproduction errors in lower-quality content dropped to a much more acceptable level. Unfortunately, 4K materials are still far from ideal – colour distortions are considerable and stem from the limitations of the television.

As for gamma, we managed to significantly reduce the excessive brightness of the image set after setting it to the correct level. However, the issue with brightness characteristics in 4K content remains unresolved – the EOTF curve still shows excessive illumination of the entire screen. It is possible that a proper implementation of dynamic tone mapping could help here, but as we mentioned earlier, this feature on the Hisense A7NQ works rather poorly instead of being helpful. Nevertheless, calibration significantly improved the overall image perception. The director's vision is now much better conveyed than in the factory settings, which more demanding viewers will certainly appreciate.

Philips OLED770 has shown signs from the beginning that it houses significant potential, but it was difficult to fully see this in the factory settings. The image was sometimes too warm, and some colors seemed to have lost their naturalness along the way. However, calibration revealed that it is a television very receptive to adjustments – it reacted to every correction and almost immediately unveiled another layer of its capabilities. The white balance was successfully set both in SDR and HDR, eliminating the yellowish glow and presenting a neutral, clear white. Gamma stabilized closer to perfection, allowing midtones to regain their naturalness, and shadows no longer appeared artificially darkened, possibly even with a slight brightening effect. The effect was obvious... Movies are watched with greater ease; the image has cinematic depth, but without the feeling that something is exaggeratedly darkened. However, the most interesting part was the work on colors. Out of the box, the errors were not dramatic but slightly noticeable – skin tones were sometimes too warm, and gray didn’t always have the shade we expected. After calibration, the error values dropped to around 2, and in many cases even below 1. This is a level significantly lower than the threshold of perception for the human eye. In other words, after correction, the colors finally “clicked” into place. Looking at the screen, we had the impression that the television had begun to speak with a full voice. Like an instrument that has finally been well-tuned.

The Hisense A7NQ impresses with smooth tonal transitions in 4K materials, but unfortunately, there is no feature here that would improve this aspect in older materials of lower quality. In such cases, colour merging becomes more visible, which can somewhat spoil the viewing experience, especially in scenes with a lot of gradients.

When it comes to upscaling, the TV performs surprisingly well. The image is clearly improved, although it does come with some compromises. One can notice that the TV adds a bit of artificial sharpness, and elements in the background, such as branches, tend to exhibit slight "jagginess." These are details, however, that will mainly catch the eye of those who pay attention to such nuances.

The problem of the previously mentioned color connections can largely be mitigated by the "distortion reduction" feature, which is an algorithm for smoothing tonal transitions in Philips TVs. It works best at a low setting—effectively eliminating unwanted color bands while not introducing strange artifacts or losing image detail. It's one of those features that is truly worth keeping switched on.

The issue with upscaling is somewhat less favorable. The image from a lower resolution can be too soft, while at the same time, distinctive "jaggies" appear in certain areas. The impression is that the algorithm is trying to reconcile two contradictory directions—smoothing and sharpening—and ultimately hasn't found the golden mean. As a consolation, it's worth noting that the television has no issues with overscan, meaning it doesn't cut off the edges of the image, which sometimes happens with other competing models.

The Hisense A7NQ is equipped with a 60 Hz matrix, meaning dynamic scenes – for example, in sports or games – are somewhat average here. This is standard for this level of TV, but it must be admitted that watching more intense, fast-moving content can leave a lot to be desired. However, when it comes to movies, the TV offers a motion smoothing feature that operates on a 10-level scale. The "motion blur reduction" option allows you to adjust the fluidity of the image to your own preferences. At the lowest setting, you get a natural film frame rate, which will please cinema purists. On the other hand, the maximum setting provides a very smooth, theatrical image that may appeal to those who prefer a more "smoothed out" motion.

The issue of the panel in the Philips OLED770 is not entirely straightforward. The manufacturer claims a 120 Hz panel, but our measurements showed that the screen can accept a 4K signal even at 144 Hz. This sounds like great news – because who wouldn't want an extra mode for PC gaming at this price? However, the reality turned out to be more complex. With 120 Hz materials, the television behaves like most OLEDs – the picture is absolutely clear, with no trace of ghosting or blurring, making it ideal for both fast-paced games and sports broadcasts. The problem arises only at 144 Hz. Unlike models with official support for that frequency, here we observe the phenomenon of so-called frame skipping. This means that the television is unable to display all frames – some of them are skipped, causing the motion to lose fluidity, and double outlines appear on the screen. The effect resembles the operation of the BFI function, which Philips does not offer in this model anyway.

Hisense A7NQ is a device that can pleasantly surprise gamers, although it is not without its faults. The fact that we have a 60 Hz panel immediately suggests that the TV is not designed for the most demanding gaming scenarios. The motion blur we described earlier can also be a hindrance, especially in dynamic games.

However, there are several things worth praising. The TV supports ALLM (Auto Low Latency Mode) and VRR (Variable Refresh Rate), which are not always standard in this price range. The biggest surprise, however, is that the A7NQ can display images at 120 Hz – although only in Full HD resolution, it is still a significant nod to gamers. This allows a choice between smoothness and resolution, which is not obvious in TVs at this price point.

A nice addition is the Game Bar, which is clear and practical – all the main features are at hand without digging through the settings. However, there is a lack of support for HGiG, which may be disappointing for gamers looking for perfect HDR in games.

If someone is looking for a gaming TV, the Philips OLED770 is a candidate that's hard to ignore. The mere fact that we have an OLED here provides a great starting point – perfect blacks and infinite contrast make evening sessions in atmospheric games look like they’ve been pulled straight from the cinema. On top of that, there’s the Ambilight system, which features LEDs on the back of the TV that extend the image onto the wall behind the screen. The effect is such that even regular gameplay in FIFA can look like a small spectacle, and in horror games, the atmosphere becomes really intense. On the technical side, it’s pretty good as well. The Philips OLED770 supports Variable Refresh Rate (VRR) up to 120 Hz, has an automatic low latency mode for gamers (ALLM), and if someone is using an Xbox Series X, they can also count on Dolby Vision support in games. You just need to know that in this mode, input lag is slightly higher than standard, although still at an acceptable level. As a bonus, we get the “Game Bar” panel, which is a special tool strip for gamers. It's not the most conveniently designed solution, but it allows you to check key parameters without leaving the game. In total, this presents a picture of a TV that on one hand has all the most important gaming features, and on the other can add something unique – Ambilight. And it’s this mix of technology and visual effect that makes the OLED770 one of the better screens for gaming in a home environment.