Haier Q80FUX vs Philips PUS7000

Alright, let's move on to the topic that generates so much discussion, namely the capabilities of the TV in HDR mode. Let's make it clear right away: the Haier Q80FUX is certainly not a brightness demon. The panel of this receiver can generate about 350 nits at peak, which in today’s reality is an absolute minimum to even talk about the presence of extended HDR tonal dynamic range. On the plus side, this power is at least stable – regardless of the test pattern or movie scene we used, the measurements invariably oscillated around 300-350 nits. These are therefore at best adequate results, definitely far from the stunning showcase of capabilities that we know from more expensive models. Fortunately, there is one aspect in which the Q80FUX makes up for these shortcomings and does so abundantly. After all, we are talking about a QLED TV (or more precisely, PFS LED), which means that thanks to the quantum dot filter applied to the matrix, it can generate really juicy, vibrant colors. These are not empty promises – a DCI-P3 color gamut coverage reaching nearly 95% is an impressive result that directly translates into very pleasant, saturated colors for the eye.

Unfortunately, the PUS7000 is not suitable for watching HDR content. This screen is simply too dark. A brightness level of 200 nits is not enough to correctly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a regular SDR recording. Therefore, it's better to stick with the latter format to avoid issues in displaying bright scenes, which you can read about below. The situation is not improved by the fact that this is a classic LCD model without additional layers to enhance colors, such as QLED or PFS. As a result, colors in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

Factory settings for film mode are rarely perfect, but in the case of the Q80FUX, we encountered a noticeable imbalance. In SDR content, the image was definitely too warm, which resulted from an excessive amount of red in the white balance, giving it a slightly sepia tone. Contrarily, in HDR materials, the television fell into the other extreme—the excess of blue created an unnatural, cold effect. However, it wasn’t the whimsical white balance that was the biggest problem with this TV. The real culprit, responsible for the previously described issues, was hidden deeper. It turned out that the Q80FUX had completely misaligned gamma values and, crucially for HDR, a poorly managed EOTF curve. It was these erroneous factory settings that caused notorious clipping of the brightest parts of the image, applying that characteristic milky filter over them. Thus, we found the source of the problem. This state of affairs led to overall, significant color errors that were easy to catch even for an untrained eye. Like every television we tested, we decided to calibrate this model as well, and you can find the results of those adjustments in the next paragraph.

We tested the television in movie mode, which theoretically should provide the best and most natural colors. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw became apparent. The PUS7000 has significant deficiencies in displaying red. Poorly tuned white balance and too low saturation of this color cause the image to appear too cool. As a result, one might get the impression that the displayed content is simply lacking in vibrant colors. The situation is exacerbated by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, the Philips menu offers many functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

The results of our calibration efforts must, unfortunately, be considered twofold. Overall, the image is indisputably better than before the corrections, but the biggest winner of this process turned out to be SDR content. It is here, after clarifying the gamma and white balance graphs, that we obtained results that can confidently be called very good. After the setup, the Q80FUX truly shines in standard dynamics, showing only slight errors in the most challenging skin tone reproductions. Unfortunately, the weakest link still remains HDR content. And here lies the paradox: even though we managed to calibrate the white balance almost to perfection, the overall color errors still remain at a fairly high level. The reason is that the television still interprets the static HDR10 metadata "in its own way," stubbornly enforcing that unfortunate washed-out image effect, which inevitably leads to significant distortions. Although we successfully eliminated the factory excess of blue color, due to this electronic interference, the screen can still tend to fall into somewhat too cold tones. This television just has it this way.

After professional calibration, it is clear that the PUS7000 responds well to image adjustments. In this price range, this is not a given. The effects should be assessed in two scenarios, depending on what content we plan to watch. SDR performs the best. After our corrections, the image looks really good. Most color errors fell below level 3, which is the threshold at which distortions typically become visible to the naked eye in measurements. Movies, series, sports, and regular television present themselves naturally, without unpleasant deviations. If someone primarily watches classic channels or streaming in HD quality, the difference after calibration will be noticeable immediately. However, it must be made clear that the PUS7000 is still not a television suitable for sensible HDR, and calibration does not change much here. The reason lies in the hardware: colors remain too undersaturated. The television lacks solutions that expand the color gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot show the intense colors required by HDR. This is most evident in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it results from the design of the backlighting and the panel itself.

If there is one area where Haier clearly shows that it has quite a bit to catch up on compared to the market leaders, it is digital image processing. The upscaling, well... is just okay. And that's about all that can be said about it. It does what it is supposed to do: it ensures that lower resolution signals don't scare you with harsh pixelation on the screen and don't look like an overly enlarged postage stamp. However, it is far from the finesse and "intelligent" sharpening that more experienced players in this market have developed over the years. The biggest drawback of the Q80FUX software, however, is the almost complete lack of additional "cleaning" and smoothing functions for the image. The receiver does not offer any noise reduction or gradient enhancement mechanisms. This means that with older or more heavily compressed materials, we simply have to accept that any imperfections in tonal transitions or color blending, which we mentioned earlier, will constantly accompany us during the viewing.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at a low setting. However, it has a flaw: if the action is too aggressive, it can introduce undesirable artifacts on the screen. It’s a good idea to experiment with this setting to find the sweet spot between a smooth image and detail clarity.

The upscaling, which is the enhancement of lower quality materials to 4K, is adequate. The image after processing is very "soft," which is typical for almost all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If someone finds it too soft, it can always be adjusted with the sharpness slider in the menu to achieve a more pronounced effect.

The issue of motion fluidity and blurring is largely predetermined by the use of a 60Hz panel, which naturally makes it difficult to recommend this receiver to enthusiasts of very dynamic content. Fortunately, in the Q80FUX, we find a few options (though, as we will see shortly, actually only one) designed to improve the experience with older film productions. There is a "De-Judder" slider available, which indeed affects the smoothness of the image and allows us to adjust it to our preferences: from raw, cinematic frame rates to a more theatrical, smoothed presentation. However, a genuine surprise awaits us right next to it in the menu. There is also a second slider, supposedly dedicated to eliminating blur – this is a feature we usually encounter in 120Hz panels, aimed at combating motion blur in sports. However, as expected, recalling memories from testing the K85F model, here too this slider is merely a facade. Moving it does absolutely nothing to the image and it simply looks like an oversight by the product engineers who left a non-functional option in the software for this type of panel.

In this regard, we don't really have any good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that's actually standard, and it's hard to expect more. However, the worst part is that the TV does not have any motion smoothing features. There are no supporting systems for either movies or sports. We have to accept that the image on the PUS7000 is processed "raw." This means that during dynamic scenes or fast camera movements, the motion may appear choppy or unclear. We have no way to enable any smoother that would soften this effect.

Stepping into the gaming territory, the Haier Q80FUX proves to be quite a decent companion for the "casual gamer." On board, we find today’s highly desired features like VRR (variable refresh rate) and ALLM (automatic low latency mode). However, the biggest surprise is something else. Although we are not dealing with a 4K@120Hz panel, the TV can accept and display a 120Hz signal at a lower resolution (Full HD). This is a very useful feature, allowing the conscious switch of the console to a lower resolution mode in exchange for significantly higher fluidity, which is a perfectly acceptable compromise in the gaming world.

We won’t particularly complain about the lack of extras like the "Game Bar," as it’s just a nice addition. The most concerning issues arise when we enter the world of HDR in games. Due to the fact that the TV constantly adapts the signal "in its own way," setting the brightness on the console according to the HGIG standard is nearly impossible to accomplish as per the instructions. Worse still, in the Dolby Vision mode for games, the input lag rises to about 50 ms, which is a high enough value that essentially makes this mode unusable. However, generally, we wouldn’t recommend gaming on this TV in HDR mode, so these aren’t such serious shortcomings. The most pleasing aspect is the presence of 120Hz in Full HD, which makes the Q80FUX quite a nice TV for the occasional gamer.

Although the PUS7000 is not marketed as a gaming TV, it does not perform as poorly in this category as one might expect. While there is no support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has included several important features that genuinely improve the comfort of playing on a console. The most significant of these are VRR and ALLM technologies. VRR is responsible for synchronizing the screen with the number of frames generated by the console. This prevents the image from "tearing" and keeps it consistent even during sudden frame drops in the game. In turn, ALLM is a solution that automatically switches the TV to the lowest latency mode right after detecting a signal from the console. All of these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be brought up on the screen at any time. It allows for a quick overview of current settings and connection status without interrupting gameplay, which is a very convenient solution.