Haier M90E vs Sony BRAVIA 7 II

Haier M90E is a television that does not lack brightness. In most movie scenes, peak luminance exceeds 1000 nits, which gives the image a clear "kick" and high dynamics. In typical, bright HDR materials, this looks really good. However, one must take into account the previously mentioned dimming algorithm. In scenes that are not evenly flooded with light – for instance, when displaying individual stars in a black sky – high brightness underscores the imperfections of zone control. Instead of a precise light point, we often see a distinct halo effect around bright objects. Despite these shortcomings, the overall image presentation can be pleasing, largely thanks to color reproduction. The manufacturer applied a PFS phosphor coating, allowing for wide coverage of the color palette. In our measurements, the coverage of the DCI-P3 space was a solid 95%.

The Sony Bravia 7 II handles HDR very well and, above all, is simply a bright TV. In the proper "Professional" viewing mode we measured about 2000 nits of peak brightness, so the panel's capabilities are really substantial. Of course, with Mini-LEDs the result on a test pattern is only part of the story, because a lot depends on how the TV controls the backlight in real scenes. And here Sony's algorithms perform really well. Depending on the scene, the brightness we measured in movies ranged from around 1100 up to 1700 nits. That's already a level at which HDR has the proper punch and bright effects can really impress. It's not perfect in every situation, though. With small bright elements on a very dark background the Bravia 7 II clearly prioritizes maintaining good black levels, which can cause their brightness to drop to around 500 nits. It still looks good, but you can see the TV doesn't always operate without compromises.

Colors

The second thing that has a huge impact on the HDR effect is, of course, color. And this is where True RGB technology was supposed to bring one of the biggest changes. Looking at the panel's raw capabilities, the Bravia 7 II performs very well. We measured about 98% DCI‑P3 coverage and 88% BT.2020, so the potential to display highly saturated colors is really large. However, in RGB TVs the situation is a bit more complex. When we performed the same measurements with a movie background applied, the gamut coverage dropped to about 92% DCI‑P3 and 78% BT.2020. Those are still good figures, especially for an RGB Mini-LED TV, but they clearly show that the final result largely depends on how the algorithms control the three backlight colors. In most scenes the Bravia 7 II handles this well and colors retain high saturation. The biggest differences are seen in shades of blue, where samples start to deviate more noticeably from the reference values and coverage is weaker than for the other primary colors. So True RGB does offer real additional possibilities here, but like with brightness, much depends on what is actually happening on the screen.

For the measurements, we chose the Film mode, which should ideally offer an image closest to the creators' intentions. Unfortunately, in the case of the M90E, its characteristics – besides the reduced brightness – do not differ much from the Dynamic mode. Both in SDR and HDR content, the image is clearly tinged with a cool blue hue. The white balance is heavily skewed towards blue, reminiscent of typical aggressive "store" settings. This results in an unnatural representation of skin tones and makes the image straining on the eyes during longer viewing sessions. The way brightness is managed also negatively affects color fidelity. The television struggles to maintain proper levels – small details are often too dim, while larger, bright areas of the image tend to get blown out. These deviations in the brightness curve, combined with the cool white balance, lead to very significant color reproduction errors (DeltaE) in the factory settings.

To evaluate the out-of-the-box colors we chose Professional mode, because it performs best among the available settings. It's not perfect, though. In SDR the white balance leans slightly toward magenta, so some scenes look a bit warmer and less neutral than they should. A bigger issue is the gamma, which sits closer to 2.5 than 2.4. That makes the image a bit too dark in places, especially in the midtones. In HDR the situation is better. As brightness increases there is a bit too much red, but it's not a fault that stands out during viewing. Overall, Professional mode is a good starting point, although you can get a little more out of it with calibration.

Haier M90E clearly benefits from professional calibration, especially for SDR content. The TV menu offers a sufficient number of tools to effectively correct factory errors. We managed to "tame" the white balance and eliminate the dominant blue tint. We also adjusted, albeit to a lesser extent, the brightness curve (gamma), which allowed us to recover some details in the shadows that were too heavily muted from the factory. The end result for SDR is a picture that is definitely more natural and pleasant to watch. In the case of HDR mode, the success is only partial. Although it was possible to improve the white balance here as well, the color reproduction errors (Color Checker) remained at a high level. Analysis of the EOTF curve (responsible for brightness in HDR) points to the root of the problem: the TV imposes its own interpretation of the signal and does not provide tools to modify this curve. The source of the high errors is not the calibration itself, but the specifics of the device – aggressive and imprecise zone dimming interferes with measurements and is "stiffly" embedded in the characteristics of this model.

After calibration the Bravia 7 II can look significantly better. First of all, we managed to set the white balance very well, both in SDR and HDR. Gamma can also be improved, and after correction it runs very close to the reference value. For most users, those changes will have the biggest impact on the picture. There is, however, a limitation when it comes to colors. On the Bravia 7 II Sony does not provide access to a classic CMS that would let us adjust individual hues separately. A lot is therefore left in the hands of the algorithms controlling the True RGB backlight. If the TV reproduces a specific color inaccurately, we are not always able to do anything about it. In our measurements this is most evident with some reds and blues, where errors can still be quite large. That does not, however, diminish the value of calibration. Correctly setting the white point and gamma strongly affects the overall image, so even without the ability to precisely tweak every color the difference compared with the factory settings is noticeable.

The evaluation of the image processor must be divided into two separate aspects, as the Haier M90E behaves inconsistently in this regard. The first issue is the upscaling itself, that is, scaling lower-resolution content to 4K. In this task, the television performs quite decently. The algorithms effectively enhance the detail, resulting in a final image that is relatively sharp, clear, and readable. In this respect, it's hard to have major complaints about the device.

The situation looks completely different with materials that have a high degree of compression, which we encounter in older recordings or on platforms like YouTube with lower bitrate. Here, the processor falters in smoothing tonal transitions and masking source imperfections. The television cannot hide compression blocks, resulting in a very harsh, "digital" character of the image. The lack of effective artifact reduction can effectively discourage viewing lower-quality content on this screen.

Upscaling and digital processing are among the Bravia 7 II's strongest assets and one of Sony's biggest advantages over the competition. Sony has handled digital image processing well for years, and it shows here too. Above all, the "Smooth Gradation" function works very well; it can smooth weak tonal transitions in lower-quality content. It's safest to set it to Low, but we'd comfortably recommend Medium as well. The effect is stronger then, and the TV still handles details very delicately. Some fine detail may be slightly smoothed, but Sony does it much more subtly than many other brands. The upscaling itself also performs very well. Lower-resolution sources are well upscaled to 4K; the picture looks clean and retains a lot of detail. Of course the TV won't magically turn native HD material into true 4K, but the Bravia 7 II does a very good job with what can be extracted from such a source.

The Haier M90E is equipped with a simple yet functional motion smoothing system (MEMC). In the settings menu, the user will find a three-level adjustment scale: low, medium, and high. This allows for tailoring the degree of interference with the image to personal preferences – from gentle smoothing of 24p movies to maximum fluidity (soap opera effect). The system operates stably and fulfills its purpose in typical applications.

The Bravia 7 II uses a 120 Hz panel, so in terms of motion smoothness it delivers everything you’d expect from a TV in this class. With sports or games at 120 fps the picture is appropriately smooth, and for movies Sony provides an advanced motion smoothing feature. You can adjust the level of interpolation separately and decide whether you want to keep a more cinematic motion or achieve noticeably smoother motion. The issue of motion blur is a bit worse. The VA panel used isn’t among the fastest, and you can notice a slight trail behind moving objects, especially on darker backgrounds. It’s not at a level that will be highly distracting during normal viewing, but last year’s Bravia 7 performed better in this respect and had a noticeably faster panel.

From a hardware perspective, the Haier M90E is a solid proposition. The TV is equipped with two full-bandwidth HDMI 2.1 ports, which ensures support for key technologies: VRR (variable refresh rate) and ALLM (automatic low-latency mode). A plus is also the correct implementation of the Dolby Vision mode for gaming, which maintains a relatively low input lag. Problems arise with software configuration. The biggest drawback is the forced, continuous dynamic tone mapping by the TV's processor. This prevents proper HDR calibration from the console using system panels (HGiG) – the TV ignores source settings and processes the image its own way. We also noted shortcomings in the interface: the M90E does not have a typical "Game Bar" (overlay with parameters), which is a standard among competitors. Cooperation with Xbox consoles at unusual parameters turned out to be problematic – the device has difficulty correctly displaying 1440p resolution at 120 Hz refresh rate. Despite the aforementioned shortcomings in the software, the Haier M90E remains a very attractive screen for gamers. The final impression is saved by a solid hardware base. Native panel refresh at 144 Hz and the presence of full-fledged HDMI 2.1 ports are advantages that are crucial in daily use. If we are looking for a TV that provides high fluidity and supports 4K signals, this model will fulfill its task.

The Bravia 7 II essentially has everything you'd expect from a good console TV today. It supports 4K at 120 Hz, VRR from 48 to 120 Hz, and ALLM, so when you start a game the TV automatically switches to low-latency mode. There's also a properly working HGiG, which means that after setting up HDR on the console the TV won't try to further brighten the image on its own. Just remember to turn off tone mapping in the TV's menu. Dolby Vision in game mode is another plus, especially for Xbox owners. Sony also includes its own Game Menu. From it you can quickly view key signal information, check VRR, or change gaming settings without digging through the TV's entire menu. The only thing missing from the feature list is support for 1440p at 120 Hz.

Our biggest complaint is not really with the features themselves, but with the connectors. The Bravia 7 II has four HDMI ports, but only two of them support full HDMI 2.1 at 48 Gbps. One of those is also an eARC port. So if you connect a soundbar or AV receiver via HDMI, in practice you have only one full HDMI 2.1 port left for a console or PC. With a single console that's fine, but with a PS5, an Xbox, and an audio setup it starts to get tight. That's hard to justify from Sony. Two HDMI 2.1 ports might be acceptable in cheaper TVs, but in a model of this class, especially in 2026, we'd expect all four ports to be HDMI 2.1.