Xiaomi S Pro 2026 vs TCL C7L

When it comes to HDR quality, the Xiaomi S Pro 2026 is undoubtedly a very bright television. On our synthetic measurement patterns, we were able to generate peak brightness of around 1400 nits. This result is not only very good but truly spectacular, considering the price of this model. However, as we always emphasise, for our editorial team, measurements and the experiences from the content viewed on a daily basis - from films and series - are more important. So let's analyse how the Xiaomi performs with film material. The result is, unfortunately, quite mixed. When very bright scenes appear on screen, the S Pro 2026 really shows its full potential and can achieve a real 800-1000 nits in bright elements. Moreover, even smaller objects can "burn" the eyes - in scenes from the film Sicario 2, small metal elements of the helicopter were truly vivid. The problem is that - and here the story comes full circle back to our contrast assessment - in such scenes we cannot count on absolutely cinematic black. In our opinion, this compromise is too great; high visibility of details in bright areas should not come at the cost of such a significant boost to black levels. And although the HDR effect itself can make a stunning impression here, it is essential to remember that when very challenging, mixed scenes appear on screen, we might feel a slight disappointment. Exactly the one we mentioned in the previous paragraph regarding issues with dimming in HDR mode. As a consolation, it is worth adding that the S Pro 2026 has been equipped with an additional PFS filter (similar in function to a QLED layer), which effectively broadens the colour gamut coverage. As a result, measurements showed DCI-P3 coverage reaching up to 94%. This gives us confidence that in most colourful scenes, the image will appear rich and appropriately saturated.

The TCL C7L is, without doubt, an extremely bright TV. In synthetic tests using static test patterns it can reach peak brightness of around 2800 nits. That's a truly phenomenal result, given the price bracket it occupies. Unfortunately, measurements with real film scenes are not as spectacular as the white-square tests. Brightness in real HDR footage on the C7L falls to around 1200 nits. That's still very good, because the vast majority of modern films are graded to that level. However, when small, pinpoint elements appear on screen, the brightness of those details drops dramatically, even to around 400 nits, which reduces the HDR impact. The TV does this deliberately to preserve black levels and avoid excessive blooming. This is somewhat understandable, but it also shows that Mini LED technology is not completely without compromises in this respect. As for the HDR effect itself, alongside brightness the key factor is, of course, colour. Thanks to the use of new 'super' quantum dots, the colours are simply superb and among the best on the market. The TV is able to achieve very wide coverage of the BT.2020 and DCI-P3 colour gamuts, matching the best RGB Mini-LED screens with ease. Best of all, the C7L can maintain such high colour saturation regardless of the scene being displayed, which is often problematic in competing RGB Mini-LED TVs.

Of course, all our measurements were carried out in "Film" mode, which is typically the best and most accurate choice we get straight out of the box. It needs to be said plainly: although it is the best mode, it is still very far from ideal. Firstly, the television has a clear tendency to impart a cool, bluish tint to the image – this is due to a poorly set white balance. Additionally, there is the issue of how the S Pro 2026 manages its brightness straight out of the box, which results in an overly vivid image. These two flaws contribute to truly significant colourimetric errors (Delta E). In HDR content, they were able to exceed our anticipated error scale of "10" by twofold (meaning values close to 20). As a reminder – the threshold for perceivable error by the human eye is a Delta E value of around 3. Results at the level of 20 indicate that the image significantly deviates from what the director intended.

When it comes to out-of-the-box colours, what's new in TCL TVs, including the C7L model, is the addition of a picture mode called Filmmaker Mode. This is significant because such a mode was not previously available from this manufacturer. As the name suggests, this setting is meant to present the picture with the filmmaker's full intent. After our tests we can confirm that it is, without doubt, the best built-in mode on this TV if you want faithful colour reproduction straight out of the box. However, we certainly wouldn't say it's perfect. Like most devices on the market, this C7L also had some factory calibration errors. The white balance in Filmmaker mode drifted towards a slightly greenish-yellow tint, caused mainly by an excess of the green component and a noticeable shortfall in blue. Of course, this won't be a major drawback for the average viewer, but if you care about perfect whites, natural skin tones and getting the full potential out of the structure of those new "super" quantum dots, the TV really needs professional calibration.

So how does the S Pro 2026 perform after our calibration procedure? We have to admit that after calibration, the television becomes a really very pleasant device for watching everyday content. As you can see in the graphs, in HD (SDR) materials, both white balance and gamma values have been brought to nearly perfection. Most importantly, colourimetric errors have become practically unnoticeable to the human eye. In this scenario, the S Pro 2026 is simply an excellent television that, after professional calibration, can provide a lot of enjoyment from watching. However, it is worth clearly noting – our efforts have not helped much in 4K HDR mode. Despite the calibration, the television still interprets the image quite strongly "in its own way," which is clearly visible in the measurement of the EOTF curve (brightness tracking). It’s a bit of a shame, as it shows that the problem lies not in the panel itself, but in the software. Underdeveloped image management algorithms in HDR content can, unfortunately, rule out this television for many more discerning users.

After professional calibration we managed to greatly improve the situation in the factory Filmmaker Mode. After our corrections, the errors in the ColorChecker test and across the wide colour gamut fell below the threshold of human perception, that is below a value of 3, which is a very good result. The TCL C7L definitely benefits from such a procedure in terms of colour fidelity, and it's hard to deny. Brightness management for HDR content looks a little worse after calibration, though. As I described earlier, even though we set this model up correctly, when you play real film scenes the TV can handle its brightness in a rather peculiar way. It often brightens some elements on screen contrary to the creator's intent, which is clearly visible in the EOTF traces measured from specific films. Despite this defect, or rather a specific characteristic of the television, one thing you can't fault is that after calibration the C7L was able to reproduce colours accurately.

Let's start with the issue we raised in the previous paragraph: can the television actually fix the problem of dreadful tonal transitions in dark scenes? Theoretically, yes – in the menu, we find a feature with the promising name "Colour Contour Removal." Well, "theoretically." Unfortunately, in practice, this setting – regardless of which of the three power levels is chosen – yielded absolutely no real results. So we are dealing with a feature that, in practice, only exists in the menu. Moving on to the quality of upscaling (scaling the image from a lower resolution to 4K), unfortunately, we have more bad news for you. The S Pro 2026 performs very poorly at this task. Interestingly, the phenomenon of "overscan" (slight cropping of the image) is not a major issue here. The fact is that the television simply displays a very raw, unprocessed image. Its attempt to upscale the signal to a higher resolution looks simply lacklustre and lacks any form of "intelligent" improvement. There is no denying it – the entire digital image processing is the real Achilles' heel of this model.

This can be seen as, to some extent, the Achilles' heel of the C7L. Unfortunately, this TV uses the older MediaTek Pentonic 700 chip, which has never been famed for outstanding digital image processing. You can clearly see that in the behaviour of the progressive smoothing function, the feature responsible for reducing jagged edges and removing digital noise. It simply performs very poorly. When set to low, its effectiveness is almost non-existent. The only small plus is that the algorithm does not further spoil the picture or blur details unnecessarily. Upscaling, that is scaling lower-resolution content to 4K, performs slightly better. It is simply adequate and does not stand out against the competition. There is no denying that the C7L would benefit greatly in this regard if the manufacturer opted for the newer Pentonic 800 processor, which is now appearing in an increasing number of rival models.

On paper, the S Pro 2026 specification looks impressive. The television is equipped with a native 144 Hz panel, with the ability to display images at up to 288 Hz in a dedicated gaming mode. These are amazing results, but what interested us most, in the context of everyday use, was how the television handles motion blur and how the image looks at 120 Hz. After all, this is the frequency used by consoles like the PlayStation 5 and Xbox Series X/S, and it is desired by sports fans. Generally, the panel "holds up". The matrix is sufficiently fast to meet these challenges, and objects displayed at native 120Hz fluidity are shown correctly. As for the software, the television is equipped with motion smoothing technology; however, with a key caveat – it works only for input signals up to 60 Hz. This means it is primarily suitable for traditional television, films, and series. Thanks to this, we can adjust the fluidity of the image to our own preferences – from a very smooth, "theatrical" approach to setting the slider to "zero" and maintaining a fully cinematic character.

The TCL C7L uses a native 4K panel with a 144 Hz refresh rate, which at lower resolutions when connected to a PC can even reach up to 288 Hz. These are, of course, very high figures and impressive on paper, but bear in mind that almost all the dynamic content you’ll watch on this TV will still run at around a maximum of 120 Hz. To rein in that motion, the TV’s menu includes a motion-smoothing system called "Motion Clarity". It offers several preset modes, including a user mode that we strongly recommend you set manually using our tried-and-tested guides on our YouTube channel. There are two key sliders available. The first, "Blur Reduction", is responsible for cutting motion blur and improving sharpness in dynamic 60-fps material, such as sports broadcasts. The second slider, "Flicker Reduction", lets you add artificial frames to films and series shot in cinematic 24 or 30 frames per second. This, of course, can completely eliminate the irritating judder that appears during camera movement.

For gamers, the Xiaomi S Pro 2026 is almost an ideal proposition on paper. It is equipped with two HDMI 2.1 ports, which allow us to unlock (although these options are somewhat hidden in the menu) the full package of features: ALLM, VRR and, crucially, the ability to work in 4K at 144 Hz. This last feature should particularly please the owners of powerful PCs. The television also has something resembling a gamer panel – and although it's hard to call it a fully-fledged "Gamebar", it serves its purpose by displaying key information. It’s just a shame that in its default form, it obscures a relatively large portion of the screen.

The biggest issue we have with this model, however, concerns how the S Pro 2026 handles games in HDR mode. To put it bluntly: it doesn’t handle it well at all. Due to the television having a poorly implemented HGiG feature (the HDR tone mapping standard for games), it is very easy to "overexpose" the image during initial HDR calibration on the console. If someone is unaware of this software flaw and follows the on-screen instructions, they will simply set the image incorrectly, resulting in burnt-out details in the bright areas. Another major problem is the Dolby Vision mode for games. While it does work, it generates such a high input lag that it becomes noticeable in dynamic titles. (You can check all our lag measurements in the paragraph below). In summary: Generally speaking, this is a really very good screen for gamers, but with one small caveat. We would rather avoid using HDR mode on it – unless we decide to manually set the brightness bar on the console "by eye", completely ignoring the instructions from the console’s pictogram.

When it comes to gaming, the TCL C7L is simply an outstanding TV for players. Thanks to two HDMI 2.1 ports with full 48 Gbps bandwidth, you get access to all the key features required by console owners and powerful PC rigs. There’s a well-working ALLM mode with very low input lag and VRR frame synchronisation that operates over an impressive range from 48 to 288 Hz. Importantly, unlike some rivals, TCL has properly implemented the console HDR10 HGIG profile and supports Dolby Vision in games. The package is completed by a very well designed gamer panel, the Game Bar, which even lets you edit its appearance and change the theme so it perfectly matches the style of your console.

The only thing you can, and even should, criticise is that the TV offers only two full-spec HDMI 2.1 ports, while the other two are older HDMI 2.0. That creates quite a logistical problem. Why? Because one of the fast ports also handles the return audio channel eARC. In practice this means that if you connect a soundbar or home cinema system to the TV, you’ll be left with just one free HDMI 2.1 socket. If you have two consoles at home, or a console and a powerful PC, unfortunately you’ll have to give something up or keep juggling cables at the back of the case while trying to maintain convenient control of the audio system.