XIAOMI A PRO 2026 vs Samsung S85H

If you are hoping for a cinema-grade HDR effect in the new Xiaomi A Pro 2026, you better cool your expectations quickly. This television is simply too dim to fully showcase the capabilities of contemporary films or series designed for the highest image quality. Our measurements showed brightness in the range of 200–300 nits, which is more akin to SDR content than ambitious HDR productions. In practice, this means that while most films may look fine, they certainly won't evoke that "wow" effect that other televisions are known for. Fortunately, not everything is lost – we must credit the PFS LED filter used here, which is a solution similar to the quantum dot technology found in QLEDs. Thanks to this, the coverage of the DCI-P3 colour palette reaches about 94%, resulting in vibrant, saturated colours in the vast majority of materials.

Interestingly, the new WOLED SE panel has brought a slight improvement in brightness to the S85 series. In the same movie scenes last year's model stayed closer to around 700 nits, while the S85H can reach roughly 800 nits. This isn't a change that completely transforms HDR perception, but that extra brightness is noticeable, especially with pinpoint highlights, specular reflections and stronger special effects. Around 800 nits is already a very good result for an entry-level OLED and in most films it's enough for HDR to have the proper impact. Bright elements can stand out clearly against perfect black, and it's still that contrast that does most of the work. You do need to bear in mind a typical limitation of organic panel technology. When a very bright scene covers a large part of the screen, brightness can drop by almost half. That's the effect of the panel's protection mechanisms, which limit its power with large bright areas.

Colours

The S85H can deliver very pleasing, saturated colours and in most HDR films it looks really good in that respect. We measured around 95% DCI-P3 coverage, so the palette most commonly used in movies is reproduced to a very high degree. Skin tones, greens and stronger reds still have the right intensity, and in normal viewing it's hard to fault them. Only when you look wider at BT.2020 do the limitations of the new OLED SE panel become apparent. Coverage was about 70%, a little less than previous-generation WOLEDs and noticeably less than QD-OLED panels. In films this is not a big loss, because most productions rarely use such highly saturated colours. You're more likely to notice it in games, where creators often opt for more intense colours.

What we saw in Filmmaker mode took us by surprise – and unfortunately not in a good way. The mode advertised as Hollywood standard resembled more of a shop window display. The white balance was shifted towards blue, leading to significant colour mistakes and burnt-out scenes in SDR content. It was slightly better, though still not perfect, in HDR materials. There were also issues there – the colour saturation and the entire palette consistently drifted towards cooler tones, resulting in an image that had more of an artificial, cold tint instead of a cinematic character. In other words: even in Filmmaker mode, which should showcase this television, we got an effect far from expectations.

For colour evaluation we naturally chose Filmmaker mode, and in SDR our S85H sample was very well set up from the factory. The largest deviation is in the white balance, where, as brightness rises, there is a slight lack of blue. In practice this means whites and greys have a subtly warmer tint than they should. However, this is not a major fault and during normal viewing it is unlikely to be very noticeable. Gamma also stays close to the reference value, so the image is neither overly bright nor unnecessarily dim. The S85H’s SDR picture quality is therefore very good straight out of the box. A few more imperfections appear in HDR. Here the white balance drifts more with increasing brightness, blue starts to dominate and the red component is clearly lacking. This also translates into larger errors for some colours. They do not yet amount to shifts that completely change the character of the image, but in direct comparison with a reference the difference is easier to spot. Overall, Filmmaker mode is a very good starting point before professional calibration.

Although Xiaomi is not a brand associated with top-tier televisions, it must be acknowledged that even in a budget model like the A Pro 2026, the manufacturer left plenty of calibration settings. After a few adjustments, the SDR image gained a completely new look. Colours stopped drifting towards blue tones, whites took on a more natural quality, and most errors dropped to a practically invisible level. As a result, SDR content looked very good, surprisingly so for this price range.

It was somewhat different with HDR materials. Here, it was immediately evident what we had already mentioned – clipping in bright scenes and issues with balance control. Calibration helped only partly, as the limitations of the panel itself played a role. However, it must be emphasized that for SDR, the television had transformed beyond recognition and in a decidedly positive direction.

Calibration yields very good results on the S85H. First and foremost, it was possible to set the white balance almost perfectly, which removes the slightly too warm character of the image that was previously visible in SDR. Colour reproduction itself also improves markedly, with most errors falling to a very low level and in everyday viewing it is hard to speak of any noticeable inaccuracies. You can also make significant improvements in HDR, although some issues remain due to the TV's inherent characteristics. The S85H does not always hold the brightness curve perfectly; the darkest parts are slightly lifted, and as you approach the panel's limits small deviations are visible in the brightest areas. Added to this is the limited coverage of the wider BT.2020 gamut, which of course cannot be overcome by any calibration. Despite this, the end result is very good and, after calibration, the S85H can produce a really well-tuned, natural image.

Upscaling and digital image processing in the Xiaomi A Pro 2026 are not among the strengths of this model. One might expect that since the television was not designed to achieve record brightness levels, the manufacturer would focus on a more robust processor and a set of features that would "enhance" lower-quality images. Unfortunately – and here we are also faced with significant disappointment. On the positive side, we can note reasonably good upscaling, which handles HD materials and boosts them up to 4K in an acceptable manner. However, this is where the list of advantages ends. The television does not offer any features that improve tonal transitions or smooth out digital imperfections, so in most cases, we get a raw image, exactly as we deliver from an external source. On a large screen, such a lack of support makes lower-quality materials simply look bland. An additional problem is the phenomenon of overscan. When watching older materials, it happens that part of the image gets cut off, which only amplifies the impression that Xiaomi still has a lot of ground to make up in this category.

Samsung has fitted the S85H with the same proprietary AI NQ4 Gen2 processor used in last year’s S85F and, in terms of digital image processing, it performs quite well. Upscaling is one of the model’s stronger points. Lower-resolution material is well sharpened, edges look natural, and the picture does not feel overly artificial. One caveat is a typical Samsung trait: at very low resolutions you cannot completely disable overscan, so the TV may slightly crop the left edge of the image. The "noise reduction" function also works very well, smoothing weaker tonal transitions. The processor can effectively remove posterisation and other imperfections visible in lower-quality material. However, you need to be careful with the strength of this function, because Samsung can be quite aggressive here. When it is activated, small image details, such as the texture of skin or clothing, can start to disappear along with the unwanted artefacts.

The fluidity of motion in the Xiaomi A Pro 2026 is an interesting compromise that arises from the hybrid matrix used here. At its native 4K resolution, the maximum refresh rate is 60 Hz – sufficient for those who mainly watch films and series. It is precisely with them in mind that the manufacturer has added a motion smoother, allowing users to adjust the image to their own preferences – opting for greater fluidity or leaving more "cinematic" frames depending on the settings.

The S85H uses an OLED panel, so it performs excellently for motion blur. Pixels respond virtually instantly, so moving objects do not leave the characteristic trailing seen on some LCD TVs. This is especially noticeable in sport and fast-paced games, where the picture remains very clean even during rapid motion. The panel itself runs at 120 Hz. That is more than sufficient for films, TV series, sport and console gaming. It is a pity Samsung did not include a higher refresh rate aimed at PC gamers, as more and more TVs now offer 144 or even 165 Hz at 4K. However, that does not affect motion handling in films or sport.

You also have a classic motion-smoothing feature with two settings, blur reduction and judder reduction. So you can decide whether films should retain their cinematic 24 frames per second or whether you prefer to smooth them a little. The S85H gives plenty of freedom here, and the interpolation works well and, with sensible settings, does not generate too many artefacts.

Exactly – since Xiaomi has included the "Game Boost 120 Hz" feature, one might expect that they would follow up with a solid gaming package. Unfortunately, reality quickly dampens this enthusiasm. Aside from this mode (which, it must be admitted, is a great addition in a budget design), we only have a rather odd player panel. It's hard to call it a full-fledged "game bar" – it’s more of a simple overlay on the TV Menu with limited capabilities. And that would be about it. There’s a lack of ALLM, so the TV won’t automatically switch to game mode. There’s no VRR, so you can forget about smooth frame sync. We also won’t find support for Dolby Vision in games or the HGiG format, which are becoming increasingly standard on consoles. In short: besides the Game Boost 120 Hz, which actually allows for a more enjoyable experience at 1080p or 1440p, the Xiaomi A Pro 2026 offers nothing that could particularly attract gamers.

The Samsung S85H is very well prepared for gaming, essentially regardless of whether you connect a console or a PC. The manufacturer hasn't skimped on ports and all four HDMI ports support full HDMI 2.1. That means you can use 4K at 120 Hz, VRR and ALLM without worrying which input your console is plugged into. With multiple devices that matters a lot, because you don't have to choose between a console, a PC or a soundbar connected via eARC. The feature set itself is very comprehensive. The S85H supports VRR, FreeSync and automatic game mode switching, and Samsung also offers its extensive Game Bar where you can quickly check key signal parameters and change settings without leaving the game. The only notable omission is Dolby Vision, which will matter mainly to Xbox owners. This, incidentally, is typical of Samsung TVs. Game Motion Plus performs very well, and it's one of the features that have set Samsung TVs apart for years. It smooths motion in games running at 30 or 60 fps, but does so without as much increase in input lag as a conventional motion interpolator. In practice, with slower-paced games, racing titles or action games this can really improve the perceived motion, especially if you're sensitive to low frame rates.