XIAOMI A PRO 2026 vs Hisense UR8S

If you are hoping for a cinema-grade HDR effect in the new Xiaomi A Pro 2026, you better cool your expectations quickly. This television is simply too dim to fully showcase the capabilities of contemporary films or series designed for the highest image quality. Our measurements showed brightness in the range of 200–300 nits, which is more akin to SDR content than ambitious HDR productions. In practice, this means that while most films may look fine, they certainly won't evoke that "wow" effect that other televisions are known for. Fortunately, not everything is lost – we must credit the PFS LED filter used here, which is a solution similar to the quantum dot technology found in QLEDs. Thanks to this, the coverage of the DCI-P3 colour palette reaches about 94%, resulting in vibrant, saturated colours in the vast majority of materials.

UR8S is a slightly higher-end Mini-LED, so you could expect a lot in terms of brightness. And indeed, on a synthetic test pattern peak brightness reached around 2200 nits. That’s a very good result, but as always what’s much more important is what the TV does in normal film scenes. Here the results are a bit more uneven. In bright scenes, where there’s a lot of light on screen, the UR8S can deliver really strong HDR. Brightness then reaches about 1500 nits, so the image is very intense and has plenty of punch. It’s worse with small bright elements on a dark background. The TV clearly dims them to keep good blacks and to prevent excessive bloom. As a result things like single stars or tiny reflections can be only around 200 nits. And here HDR is no longer as impressive. So you can see that the local dimming algorithm works effectively, but it also has its cost: sometimes it simply sacrifices the brightness of small details in favour of contrast.

Colours

With RGB Mini-LED TVs colours should be judged a little differently than usual. If we look solely at the panel’s native capabilities, the UR8S performs excellently. We measured around 94% coverage of BT.2020 and practically full DCI-P3. These are among the highest values currently found in LCD TVs and this is where the potential of the RGB backlight is most obvious. The problem is that this potential is not always realised in real scenes. When we ran the same measurements on test patterns with a film background applied, saturation of some colours began to fall noticeably. Individual zones are not always able to control the three RGB components so precisely when the scene becomes more complex. This is most visible with blue and magenta. On simple test patterns they can look very strong, but in more demanding scenes samples of those colours visibly shrink. So the UR8S’s capabilities are enormous, it’s just that the TV cannot fully make use of them in every scene.

What we saw in Filmmaker mode took us by surprise – and unfortunately not in a good way. The mode advertised as Hollywood standard resembled more of a shop window display. The white balance was shifted towards blue, leading to significant colour mistakes and burnt-out scenes in SDR content. It was slightly better, though still not perfect, in HDR materials. There were also issues there – the colour saturation and the entire palette consistently drifted towards cooler tones, resulting in an image that had more of an artificial, cold tint instead of a cinematic character. In other words: even in Filmmaker mode, which should showcase this television, we got an effect far from expectations.

For assessing the out-of-the-box colours we used Filmmaker mode, which is intended to show an image that is as close as possible to how the material was prepared. Looking at the white balance alone, the UR8S performs quite well. There is no strong tint that immediately jumps out, although as brightness increases a little too much blue and red start to appear, with a simultaneous shortfall of green. Colour errors therefore show up in measurements, but the image itself does not look bad. We have far greater reservations about how the UR8S manages picture brightness. In SDR the gamma sits around 1.9–2.0 for most of the range instead of the target 2.4. In practice this simply means the picture is too bright, especially in the midtones. Shadows are lifted too much, causing the image to lose some depth. A similar tendency is visible in HDR. The EOTF curve is above the reference value for a large part of its range, so the UR8S again brightens the image more than it should. This is not due to a lack of brightness — the TV has plenty — but to the way it manages that brightness. As a result, HDR content can look very striking, but not always precisely as it should.

Although Xiaomi is not a brand associated with top-tier televisions, it must be acknowledged that even in a budget model like the A Pro 2026, the manufacturer left plenty of calibration settings. After a few adjustments, the SDR image gained a completely new look. Colours stopped drifting towards blue tones, whites took on a more natural quality, and most errors dropped to a practically invisible level. As a result, SDR content looked very good, surprisingly so for this price range.

It was somewhat different with HDR materials. Here, it was immediately evident what we had already mentioned – clipping in bright scenes and issues with balance control. Calibration helped only partly, as the limitations of the panel itself played a role. However, it must be emphasized that for SDR, the television had transformed beyond recognition and in a decidedly positive direction.

Hisense provides plenty of calibration options and, in SDR, these can yield a very good result. After calibration, the white balance is practically even across the entire range, and colour errors fall to very low values. The UR8S can be adjusted very precisely here. HDR is somewhat different. The white balance itself can also be noticeably improved, although at the highest brightness levels larger deviations begin to appear. The most interesting aspect, however, is the behaviour of the EOTF curve. Even after it has been correctly set on test patterns, the UR8S still tends to interpret brightness in its own way when watching films. Depending on the scene, parts of the image are slightly brightened while others are dimmed relative to how they should appear. This shows that the algorithms controlling the local dimming have a significant influence on the final image. Calibration therefore allows colours to be improved very effectively, but we are not able to completely 'turn off' the way the UR8S manages brightness in HDR.

Upscaling and digital image processing in the Xiaomi A Pro 2026 are not among the strengths of this model. One might expect that since the television was not designed to achieve record brightness levels, the manufacturer would focus on a more robust processor and a set of features that would "enhance" lower-quality images. Unfortunately – and here we are also faced with significant disappointment. On the positive side, we can note reasonably good upscaling, which handles HD materials and boosts them up to 4K in an acceptable manner. However, this is where the list of advantages ends. The television does not offer any features that improve tonal transitions or smooth out digital imperfections, so in most cases, we get a raw image, exactly as we deliver from an external source. On a large screen, such a lack of support makes lower-quality materials simply look bland. An additional problem is the phenomenon of overscan. When watching older materials, it happens that part of the image gets cut off, which only amplifies the impression that Xiaomi still has a lot of ground to make up in this category.

A big plus of the UR8S is the use of the MediaTek Pentonic 800 processor, and digital image processing is one of this model's stronger points. The TV handles smoothing tonal transitions very well, especially with lower-quality content. The feature responsible for this effect works effectively without overprocessing the picture. Even on the medium setting it can noticeably reduce visible banding and unevenness without heavily blurring details. Upscaling itself also performs very well. Lower-resolution content is displayed cleanly, edges look natural, and the image is not overly sharpened. The UR8S simply copes very well with a weaker signal, and in this respect it is one of its most notable strengths.

The fluidity of motion in the Xiaomi A Pro 2026 is an interesting compromise that arises from the hybrid matrix used here. At its native 4K resolution, the maximum refresh rate is 60 Hz – sufficient for those who mainly watch films and series. It is precisely with them in mind that the manufacturer has added a motion smoother, allowing users to adjust the image to their own preferences – opting for greater fluidity or leaving more "cinematic" frames depending on the settings.

The UR8S is equipped with a panel with a native 180 Hz refresh rate, so right from the start it offers excellent motion handling. The panel itself performs really well here, although some limitations typical of VA panels are still visible. Motion blur is relatively minor for this type of screen, but with faster motion (especially on darker backgrounds) it can still be noticed, particularly when compared with the same image on OLED TVs.

Exactly – since Xiaomi has included the "Game Boost 120 Hz" feature, one might expect that they would follow up with a solid gaming package. Unfortunately, reality quickly dampens this enthusiasm. Aside from this mode (which, it must be admitted, is a great addition in a budget design), we only have a rather odd player panel. It's hard to call it a full-fledged "game bar" – it’s more of a simple overlay on the TV Menu with limited capabilities. And that would be about it. There’s a lack of ALLM, so the TV won’t automatically switch to game mode. There’s no VRR, so you can forget about smooth frame sync. We also won’t find support for Dolby Vision in games or the HGiG format, which are becoming increasingly standard on consoles. In short: besides the Game Boost 120 Hz, which actually allows for a more enjoyable experience at 1080p or 1440p, the Xiaomi A Pro 2026 offers nothing that could particularly attract gamers.

In terms of gamer features the UR8S performs really well. The TV supports practically everything you can expect from a modern console or PC display. It offers ALLM, VRR and 4K at 120 Hz. There is also Dolby Vision in Game Mode, so when using, for example, the Xbox Series X you do not have to give up that HDR format. PC gamers get even more options. The panel can run at 4K at 180 Hz, and dropping to Full HD can raise the refresh rate to as much as 330 Hz. There is also a Game Bar that lets you quickly check key information and change gaming-related settings. The only clear omission is a correct implementation of HGiG. With it enabled the TV still alters HDR brightness mapping, so we do not get the effect intended by that standard. Aside from that, the UR8S is very well prepared for both consoles and a powerful PC.