XIAOMI A PRO 2026 vs Dreame S100

If you are hoping for a cinema-grade HDR effect in the new Xiaomi A Pro 2026, you better cool your expectations quickly. This television is simply too dim to fully showcase the capabilities of contemporary films or series designed for the highest image quality. Our measurements showed brightness in the range of 200–300 nits, which is more akin to SDR content than ambitious HDR productions. In practice, this means that while most films may look fine, they certainly won't evoke that "wow" effect that other televisions are known for. Fortunately, not everything is lost – we must credit the PFS LED filter used here, which is a solution similar to the quantum dot technology found in QLEDs. Thanks to this, the coverage of the DCI-P3 colour palette reaches about 94%, resulting in vibrant, saturated colours in the vast majority of materials.

The Dreame S100 is a relatively bright television. In movie mode, the brightness we measured reached around 600 nits. This is a really good result, although not the highest when considering the competition at this price point. In fullscreen scenes, it is evident that the television can produce an image that impresses with its brightness. Unfortunately, when more complex scenes appeared on the screen, the local dimming algorithm in this model primarily focused on maintaining the deepest blacks. However, this came at the expense of HDR performance – and in a drastic manner. In such scenes, the brightness of bright elements dropped below 100 nits, which is a frankly tragic result, far from any HDR effect. One can improve this aspect, but not without a "however." It is simply necessary to change the local dimming setting in the television's menu, but then the blacks in such scenes simply become grey. It's a pity that Dreame couldn't better refine the local dimming algorithms, and the S100 is another example that the sheer number of local dimming zones does not always translate to a better image. As a consolation, it is worth adding that the Dreame S100 is advertised as a "QLED" type television, although in reality it uses a PFS LED filter. As a result, the colours are appropriately saturated, and the colour gamut coverage of DCI-P3 we measured exceeded 94%.

What we saw in Filmmaker mode took us by surprise – and unfortunately not in a good way. The mode advertised as Hollywood standard resembled more of a shop window display. The white balance was shifted towards blue, leading to significant colour mistakes and burnt-out scenes in SDR content. It was slightly better, though still not perfect, in HDR materials. There were also issues there – the colour saturation and the entire palette consistently drifted towards cooler tones, resulting in an image that had more of an artificial, cold tint instead of a cinematic character. In other words: even in Filmmaker mode, which should showcase this television, we got an effect far from expectations.

We tested the Dreame S100 in 'movie' mode and we definitely recommend using this setting for watching all types of content. Interestingly, within the deeper settings of the television, we also find a dedicated 'Filmmaker' mode, which is now available from almost every manufacturer. However, in the case of the Dreame S100, we do not recommend using it – it blocks all settings related to the picture and does not allow for any configuration in the menu - even motion smoothing. So, how do the factory colours of the S100 fare? Not too badly, but also not the best. The television itself was quite heavily tinted with blue components, which is clearly visible in our white balance measurements. This made the picture artificially brightened, and the colours had a slight bluish tint. This is confirmed by the Color Checker palette, which showed how the colour samples tend to drift towards blue, generating quite significant colour errors. The picture in HDR mode looked definitely better, where the colour errors were not as prominent, although they still fell far from perfection. Here, the white balance was also shifted too much towards blue, causing considerable errors in colour reproduction.

Although Xiaomi is not a brand associated with top-tier televisions, it must be acknowledged that even in a budget model like the A Pro 2026, the manufacturer left plenty of calibration settings. After a few adjustments, the SDR image gained a completely new look. Colours stopped drifting towards blue tones, whites took on a more natural quality, and most errors dropped to a practically invisible level. As a result, SDR content looked very good, surprisingly so for this price range.

It was somewhat different with HDR materials. Here, it was immediately evident what we had already mentioned – clipping in bright scenes and issues with balance control. Calibration helped only partly, as the limitations of the panel itself played a role. However, it must be emphasized that for SDR, the television had transformed beyond recognition and in a decidedly positive direction.

The Dreame S100 has proven to be a device very amenable to professional calibration. In its menu, we found a plethora of advanced options that allowed us to effectively correct factory errors. Thanks to advanced white balance correction – both in SDR and HDR content – we completely eliminated the excess blue components. The image immediately became much more natural and pleasant to the eye. After fully tuning the colours, the errors in the Color Checker test dropped below Delta E values of 2-3. For the average viewer, this means that any colour distortions have become nearly impossible to perceive with the naked eye. This is truly a pleasant surprise, as new brands in the television market often encounter significant issues with the correct implementation and functioning of sliders in the calibration menu. Here, everything worked as it should. The only thing we must criticise is the way the television manages its brightness in HDR. Due to the specific nature of the local dimming algorithms, anomalies can be seen on the EOTF curve we measured. Where high highlights should appear, there is a slight boosting of the curve above the reference line. In practice, this causes an unnatural brightening of some of the brightest elements in films or games. Despite this minor flaw, professional calibration brings about a huge, very positive change in this model.

Upscaling and digital image processing in the Xiaomi A Pro 2026 are not among the strengths of this model. One might expect that since the television was not designed to achieve record brightness levels, the manufacturer would focus on a more robust processor and a set of features that would "enhance" lower-quality images. Unfortunately – and here we are also faced with significant disappointment. On the positive side, we can note reasonably good upscaling, which handles HD materials and boosts them up to 4K in an acceptable manner. However, this is where the list of advantages ends. The television does not offer any features that improve tonal transitions or smooth out digital imperfections, so in most cases, we get a raw image, exactly as we deliver from an external source. On a large screen, such a lack of support makes lower-quality materials simply look bland. An additional problem is the phenomenon of overscan. When watching older materials, it happens that part of the image gets cut off, which only amplifies the impression that Xiaomi still has a lot of ground to make up in this category.

For scaling and digital processing in the Dreame S100, the technology that the manufacturer proudly calls Dreamind™ Pro AI is responsible. However, it must be clearly stated that this is not a proprietary processor, but merely a marketing name for a chip made by MediaTek – more precisely, the MT5889 model. Unfortunately, we are talking about a rather outdated unit, from a time when MediaTek lagged significantly behind the competition in terms of performance. This unfortunately has a direct impact on the image as that is what this chip also deals with. The upscaling in the S100 is quite mediocre, and the processor has a tendency to heavily and artificially sharpen edges (fortunately, this can be somewhat tempered with the sharpness slider in the menu). In the options, we also find the "Contour Smoothing" feature, which theoretically is supposed to improve tonal transitions. In practice, it offers almost no improvement – setting it to any level rarely eliminates visible banding of colours, but it can unnecessarily blur elements of the image that should remain sharp.

A separate issue is the phenomenon of overscan (cropping the edges of the frame), which is noticeable here practically all the time. Although there is an option to set the screen to display the full frame in low-resolution materials, this requires activating the previously mentioned Filmmaker mode. And as you know, this mode completely blocks the adjustment of any other sliders in the picture menu. In our test tables, we marked that the television offers an option to disable overscan, as technically such a function exists in the system – however, in everyday use, when maintaining sensible image settings, you will not be able to take advantage of it.

The fluidity of motion in the Xiaomi A Pro 2026 is an interesting compromise that arises from the hybrid matrix used here. At its native 4K resolution, the maximum refresh rate is 60 Hz – sufficient for those who mainly watch films and series. It is precisely with them in mind that the manufacturer has added a motion smoother, allowing users to adjust the image to their own preferences – opting for greater fluidity or leaving more "cinematic" frames depending on the settings.

When it comes to motion fluidity, the Dreame S100 performs really well. It features a panel with a refresh rate of 144 Hz, although in reality, the vast majority of people using it in a traditional way will still be limited to 120 Hz (as this is the maximum supported by today's equipment apart from PCs). Thanks to the high refresh rate, the image in motion remains really sharp, largely thanks to the well-functioning MEMC smoother. In the menu, we find predefined modes that allow the television to efficiently generate artificial frames, which effectively improves the fluidity of dynamic sports scenes, but also eliminates image stuttering in film and series materials recorded at 24 frames.

Exactly – since Xiaomi has included the "Game Boost 120 Hz" feature, one might expect that they would follow up with a solid gaming package. Unfortunately, reality quickly dampens this enthusiasm. Aside from this mode (which, it must be admitted, is a great addition in a budget design), we only have a rather odd player panel. It's hard to call it a full-fledged "game bar" – it’s more of a simple overlay on the TV Menu with limited capabilities. And that would be about it. There’s a lack of ALLM, so the TV won’t automatically switch to game mode. There’s no VRR, so you can forget about smooth frame sync. We also won’t find support for Dolby Vision in games or the HGiG format, which are becoming increasingly standard on consoles. In short: besides the Game Boost 120 Hz, which actually allows for a more enjoyable experience at 1080p or 1440p, the Xiaomi A Pro 2026 offers nothing that could particularly attract gamers.

The Dreame S100 seems almost like the perfect screen for a gamer. The television is equipped with 2 HDMI 2.1 ports with a bandwidth of 40 Gbps, which means that functions like automatic game mode (ALLM) and variable refresh rate (VRR) ranging from 48 to 144 Hz work seamlessly on consoles. It also features a well-designed gaming panel (Game Bar), allowing users to continuously monitor important parameters—from active picture modes to the number of frames rendered by the console, and even the option to add a crosshair in the middle of the screen. All of this looks great on paper; however, the biggest problem with the S100 is the implementation of HDR mode in games. The television does not have the HGiG format implemented correctly. As a result, an unsuspecting user may incorrectly configure the console when first using the screen. Poor configuration can lead to an image that is too dark or too washed out (as a guideline: we suggest setting the brightness in the Xbox console menu to around 600 nits, and in the PS5 to 12 clicks). The Dolby Vision format also proves problematic, as it often would not activate at all between the XBOX and Dreame S100. And when it was finally managed to be activated, playing was not possible due to a very high input lag often exceeding 100ms. If the manufacturer can improve the HDR issue in games via an update, the S100 will be truly excellent hardware for gamers. For now, however, compromises need to be accepted.