XIAOMI A PRO 2025 vs LG OLED B6

In the HDR category, the television Xiaomi A Pro is, to put it plainly, lacking. Under ideal conditions, it offers brightness at around 250 nits. This is a poor result; however, in this price range, many competing models offer similar or lower values. Such brightness is too low to fully realise the potential of HDR content. In practice, this means that the image does not gain the appropriate depth and intensity expected from high-quality HDR. These values are more characteristic of standard dynamic range (SDR), which means that the true HDR effect remains beyond the reach of this model, and scenes that should stand out with spectacular brightness and contrast seem flat and lacklustre. However, for its price, the television offers good coverage of the DCI-P3 colour gamut at 92%, thanks to the use of quantum dot technology (specifically PFS LED). This results in vibrant and saturated colours, which will appeal particularly to gamers and film enthusiasts who appreciate richer shades and better colour reproduction compared to traditional televisions without this technology.

The LG B6 is a moderately bright OLED. After calibration it reaches around 800 nits, roughly 200 nits more than last year’s B5. That’s down to the new, budget OLED SE panel from LG Display. In practice it simply gives a bit more headroom and makes HDR look fuller in many scenes than on last year’s lower‑end OLEDs. That does not mean the B6 has no limitations. In very bright shots, when a large part of the screen is strongly lit, brightness can fall below 400 nits. This behaviour is typical for OLED TVs, especially in this segment, and that’s where you see the biggest difference compared with more expensive models. Even so, we judge the B6’s results as genuinely solid. It’s still not a TV for breaking brightness records, but the HDR effect is strong enough that films truly feel like a step up from ordinary SDR. Colour gamut Using the OLED SE panel has had a slight impact on wide colour gamut coverage. Compared with last year’s model the results have fallen by a few percentage points. It covers roughly 96% of DCI‑P3 and about 71% of BT.2020. That doesn’t mean the colours on the LG B6 are weak. In most films and series they look lively, well saturated and simply pleasing to the eye. You only notice the difference in very bright, highly colourful scenes. Then colours lose some intensity compared with QD‑OLED panels. This stems from the WOLED panel structure. Besides red, green and blue subpixels it also uses a white subpixel, which helps to boost brightness. However, this comes at a price. At very high luminance some colour is effectively 'diluted' by the white light, so the saturation of certain colours can be slightly lower. In everyday use this isn’t a major issue, but in the most demanding scenes you can notice it.

The Xiaomi A Pro 2025 television has been tested in movie mode, which offers the best colour reproduction straight out of the box. However, it is worth noting that it is not free from flaws. Analysing the white balance, it can be observed that the values for green are in the negative. This phenomenon leads to some distortions in the shades of white, and with pure white, the graph shows clear deviations. The over-contrasted image results in inappropriate tonal transitions in red, negatively affecting the quality of colour display. Generally, in the image below, it can be seen that the overall scenery before calibration acquires pink hues. Additionally, when analysing gamma contrast, the graph is significantly below the 2.4 value, suggesting that the television overly emphasises dark tones, and the brighter areas of the image may be less vivid. Furthermore, the EOTF curve shows a strong peak at the beginning, which can lead to a loss of detail in bright scenes and an unpleasant feeling of over-drawing. These aspects indicate a need for further calibration to achieve a more balanced colour reproduction and improve the overall image quality. Users who expect precise colour reproduction may be forced to take measures to adjust the television settings to achieve more realistic and natural visual results. In the xiaomi tv a pro 2025, the factory colour settings in Xiaomi are average and may require calibration. After proper colour adjustment, the image gains a natural and vibrant colour palette, much closer to cinematic standards. It is worth adding that the issue of inaccurate colour reproduction is typical for many televisions in this class, meaning it is not a flaw unique to the Xiaomi A Pro 2025 TV. For those who value perfect colour reproduction, professional calibration will prove to be a key element that enhances the overall image quality.

We tested the LG B6 in Filmmaker Mode, the best picture setting available straight out of the box. ISF modes produce very similar results, but in our tests we always stick to Filmmaker Mode for better comparison with other TVs. Each of them is, in any case, a much better starting point than Vivid or Eco mode, where the picture is heavily boosted and noticeably less natural. On SDR material the factory settings perform really well. Colour errors are small, the gamma response is correct, and the picture during normal viewing looks natural and does not feel overly "pumped up". It's a bit worse with HDR. When such content is played you quickly see that the white balance hasn't been set perfectly. Too much blue and red gives the image a slightly pink tint. This is also confirmed by colour gamut measurements and the ColorChecker, where samples clearly shift in that direction. It's not a flaw that completely spoils the picture, but it is noticeable with HDR films. Therefore anyone who wants the most faithful image should consider calibration, which we cover further on in the review.

Now it's time to check how the Xiaomi A Pro 2025 television has performed after calibration. The biggest beneficiary of this process is the white balance. After the calibration was conducted, all previous errors were corrected in both HD and 4K content, and most errors no longer fall significantly outside the value of "2". This means a much more balanced and natural colour representation, which certainly affects the viewing comfort. In terms of gamma, the drop was significantly reduced, resulting in a more consistent tonal representation across various scenes. Nevertheless, the EOTF curve has not been significantly improved due to a lack of effective control over dynamic tone mapping. This limitation means that there are still some issues with detail reproduction in bright scenes, which may affect the perception of certain materials. However, despite these minor shortcomings, the overall shape of the image is definitely better after calibration. The television has gained in quality, and the improved white balance along with reduced gamma issues allows users to enjoy a more realistic and pleasant visual experience. Further adjustment of settings may enhance image quality even more, but even now the television demonstrates its capabilities, meeting the expectations of many users.

During calibration, we concentrated mainly on HDR content, because that's where the factory settings needed the most correction. We did not, however, neglect SDR mode, which after adjustment was brought almost to perfection. Colours are very accurate, and brightness is controlled as it should be. The biggest improvement in HDR came from fixing the white balance. Removing the excess red and blue eliminated the pinkish tint, and the image became much more natural. Skin tones, whites and all colours that had previously shifted towards pink improved. After calibration most errors fell below a Delta E of 2–3, the threshold at which the average viewer stops noticing differences with the naked eye. So the LG B6 can deliver a very accurate picture, particularly for the manufacturer's entry-level OLED model.

How does the Xiaomi A Pro 2025 television cope with tonal transitions, especially with lower-quality materials? Thanks to advanced digital processing, the colour contour removal function works surprisingly well. We recommend setting this option to "Medium" – the television significantly improves the fluidity of tonal transitions while avoiding excessive smoothing of other image elements, such as film grain.

In the case of the tested image featuring a model and numerous branches in the background, the Xiaomi A Pro 2025 showcased its capabilities in terms of digital processing. Adding artificial sharpness to this scene made the details of the model more pronounced, and her hair appeared more detailed. However, delicate contours appeared around the branches in the background, which were a result of digital interference. Although this enhances the overall impression of detail, excessive sharpness can make some elements of the image seem unnaturally emphasised.

The LG B6 handles lower-quality material very well. This is largely thanks to effective digital image processing, which can mask some of the source’s imperfections without overly smoothing the whole scene. The "Smooth Gradation" function proves particularly useful. It noticeably reduces posterisation, especially in dark parts of the image. The safest choice remains the Low or Medium setting. The function still effectively smooths out unsightly tonal banding, but does not yet interfere too much with fine details. Purists can of course leave it switched off. Upscaling to 4K also performs very well. Full HD and 720p material retain a good amount of detail, and the image is neither overly sharpened nor heavily blurred. Some limitations only become apparent with very poor sources below 720p, where the smallest text and fine elements are not always perfectly sharp, but this applies to almost every other TV on the market.

Xiaomi A Pro 2025 offers a motion smoothing feature called "Motion Smoothing," which primarily works in films. It can be adjusted to prefer either a more cinematic, film-like effect with visible frames, or a smoother, theatre-like image. This function should satisfy those who intend to watch mainly films on it. However, gamers and sports fans may feel disappointed. The 60 Hz refresh rate panel, typical in this price range, does not impress. Our "Ufo" test revealed some motion blur. Those expecting better sharpness of moving objects may be slightly let down.

One of the biggest advantages of OLED panels is the very fast pixel response time. This keeps the picture sharp and free of the visible smearing often seen on LCD TVs. However, there is a downside. During slow camera pans motion can look choppier than on LCD screens, where some of that effect is naturally masked by the slower panel. Fortunately, on the LG B6 this can be easily mitigated using the TruMotion system. With the motion smoothing set correctly you can achieve smoother motion without giving the picture an exaggerated soap opera effect.

Xiaomi A Pro 2025 offers several features useful for gamers, including Game Bar, which is different from the typical "dashboards" with interfaces found in other manufacturers' products. Thanks to this, users can quickly access game-related settings, which is convenient during intense sessions. The TV also supports Automatic Low Latency Mode (ALLM), meaning it automatically switches to a mode optimised for gaming, reducing signal latency. Unfortunately, it lacks support for HDMI 2.1, limiting its capabilities for connecting the latest gaming consoles that may require higher bandwidth. Additionally, the TV does not support features such as VRR (Variable Refresh Rate) or G-Sync, which are increasingly desired by gamers, as they allow for smoother visuals and eliminate tearing. For these reasons, although Xiaomi A Pro 2025 has some features for gamers, in this price range, better options can be found that offer more advanced solutions dedicated to gamers.

LG OLED B6 has plenty to offer gamers; it’s simply a complete base for PS5, Xbox Series X/S or a capable PC. It has four full-size HDMI 2.1 ports with 48 Gbps bandwidth, so you can avoid irritating cable swapping when connecting several newer devices at once. It offers a full suite of synchronization technologies, from standard VRR to G-Sync and FreeSync. The screen synchronises the refresh rate seamlessly with the frame output from the console or graphics card. Of course it includes ALLM: the B6 automatically recognises when a game is running and immediately reduces latency to a minimum. HDR support is also excellent. The TV supports Dolby Vision, and a correctly implemented HGiG standard means that, after initial calibration in the console settings, the image won’t suffer from blown-out highlights or lost detail in bright areas. The cherry on the cake is the Game Bar. Instead of digging through the full menu during gameplay, a single click is enough to adjust shadow visibility, tweak selected parameters or simply check the current display mode. All of this makes the LG B6 an excellent choice for gamers.