TCL RM7L vs Samsung The Frame Pro 2026 (LS03HW)

TCL RM7L is a bright TV. In our measurements its peak brightness hovered around 1600 nits. That is clearly less than the C7L, which can approach 2600 nits, but in real film scenes the difference between the models is not that large. In less demanding shots with many bright elements, the RM7L can sustain about 1000 nits, and sometimes even a little more, getting close to 1500 nits. It performs worse in dark scenes with small points of light, where their brightness can fall to around 500 nits. This is not random behaviour. The TV intentionally dims fine details to better control the backlight and preserve higher contrast. That comes at the expense of their intensity, but it is typical behaviour for TVs with local dimming in a similar price bracket.

Colour gamut coverage

In HDR not only brightness matters but also colour. And here the RM7L has plenty to show. Colours are highly saturated and a wide colour gamut is one of its major strengths. In our DCI-P3 measurements it reached about 96%, and BT.2020 around 83%. It is worth remembering that on a TV with this kind of backlight the result can vary depending on the scene. On test patterns colours look best, while in films their saturation is sometimes a little lower than on SQD Mini LED or QD-OLED TVs. The construction of the backlight itself is also interesting. The RM7L does not use the classic red, green and blue LED set. TCL used two green LEDs and one blue, with the red produced by a PFS phosphor. This shows up in spectrometer measurements, but it does not have a major impact on the picture. Colours are still rendered correctly.

One thing you cannot deny The Frame Pro is: brightness. At peak we measured around 850–900 nits, so the TV already has enough power to show many HDR scenes really impressively. Bright, full‑screen shots and more colourful frames perform best here. In such scenes The Frame Pro can make a good impression because the image is bright, punchy and has the effect we expect from HDR. In our measurements some scenes reached over 800 nits, and even in more challenging segments the TV maintained a quite respectable brightness level.

The problem starts when HDR depends on small bright elements shown on a dark background. Individual lamps, stars or highlights can be bright, but very often the black level across a larger part of the image also rises. As a result the bright point itself may look good, but the whole frame loses a lot of quality. Therefore The Frame Pro shows HDR best in scenes that are simply full‑screen. If a film or TV series has plenty of such shots, the effect can be really pleasant. In darker material the limitations of local dimming are much more noticeable.

Colours

The Frame Pro should be praised for its colour gamut coverage. The TV uses quantum dots, the solution known as QLED, which allows it to reproduce very well saturated colours. In our measurements coverage of the most important film gamut DCI‑P3 was around 94.5%, while the more demanding BT.2020 was about 72%.

These are very solid results that in most scenes allow for pleasant, saturated colours. Of course these figures are not as spectacular as in the latest screens using RGB backlighting, but The Frame Pro makes up for that with something else: colour stability. Regardless of the scene, colour saturation remains fairly consistent and there are no situations where the TV loses colour badly in more demanding shots.

We checked the out-of-the-box colours in Filmmaker Mode, the best picture setting available to the user. TCL has been using it in its TVs for two years, and its aim is to reproduce the image as faithfully as possible in line with the creators' intent. On the RM7L it was indeed the most accurately set mode, although it was not without flaws. The biggest problem was the white balance. Too much red and blue made the image shift towards slightly pink tones. This was visible in both SDR and HDR. On top of that the brightness response was slightly boosted, making the picture appear a little brighter but at the same time less contrasty than it should be.

In SDR material The Frame Pro in Filmmaker mode performs quite well, though it falls a little short of perfect. The white balance is relatively even, but as brightness increases the blue component drops, so the brighter parts of the image can have a slightly warmer tint. A bigger difference is visible in the gamma, that is the handling of the screen's brightness. For most of the range it runs below our reference point, which means the TV slightly brightens midtones. As a result the image can appear a little brighter and less contrasty than it should. The colour errors themselves are not huge, but they are noticeable enough that calibration could still bring considerable improvement.

In HDR content the white balance looks similar — for a large part of the range it is fairly even, with larger deviations appearing only at higher brightness. The EOTF curve is more interesting. The Frame Pro sticks reasonably close to the reference values in the brighter part of the image, but clearly brightens the darkest sections. This is mainly due to the design of the TV's backlight. That also affects colours. With less saturated hues the errors remain moderate, but as saturation increases they become much larger. In Colour Checker measurements a large portion of samples already show high error values. The factory HDR can therefore be regarded as decent, but it is certainly not an image we would call very faithful.

Thanks to the fairly extensive calibration menu we were able to correct the vast majority of the previously described issues. The biggest change concerned the white balance. After calibration it now looks very good, so the picture shed its pinkish tint and became much more neutral. The luminance response has also improved. Both the SDR gamma and the HDR EOTF curve are now much closer to the reference values. The picture is no longer unnecessarily brightened, and darker areas look more natural and have greater depth. Better luminance accuracy also affected the colours, which after calibration are noticeably more accurate. Not everything could, however, be set perfectly. With HDR material the RM7L still interprets part of the signal in its own way and does not always follow the reference curve precisely. This is most apparent in some darker scenes, where the TV can either slightly lift the shadows or darken them completely. That is where the earlier impression of a slightly brightened, less contrasty picture came from. Despite this, the calibration delivers a very good result. It removes the most visible errors and, above all, makes the picture much closer to how it should look.

After calibration the biggest improvement is visible above all in SDR content. We managed to even out the white balance, but the more important change was the gamma correction, which before calibration had the greatest influence on the image character. After the adjustments the gamma curve is now very close to the reference, so the picture is not as bright in the midtones and simply looks more natural. Colour errors have also been significantly reduced, so the effect of calibration in SDR is clearly visible.

With HDR the situation is somewhat more complex. White balance has been improved and over part of the range the TV stays much closer to the reference, but deviations still appear at higher brightness levels. The same applies to colour reproduction: some errors can be corrected, but not all stem from the settings alone. This highlights the limitations of the TV's design and the way its backlight and local dimming affect HDR images. Therefore, with The Frame Pro calibration makes the biggest difference to everyday viewing. Regular TV, YouTube and films and series in SDR (mainly those from the cheaper tiers of streaming services) can look noticeably better afterwards.

Upscaling and digital image processing are not the RM7L's strong suit. TCL has used the MediaTek Pentonic 700 chipset here, designated MT5896, which is not among the best processors when it comes to handling lower-quality source material. The biggest problems appear with heavily compressed content from YouTube or standard broadcast TV. The processor cannot effectively hide posterization and the characteristic banding between tones. The feature intended to smooth these issues does little to help, and can also interfere with the image too much, smoothing, for example, faces or fine textures. For that reason it is best simply not to use it.

Standard upscaling to 4K looks better. Lower-quality content is sufficiently sharp and retains an adequate amount of detail. It is not on a par with the best processors on the market, but for everyday viewing the result is entirely acceptable.

The Frame Pro uses the NQ4 AI Gen3 processor, so in terms of image processing it behaves very similarly to other newer Samsung TVs. Upscaling works really well – lower-resolution content is appropriately sharpened and the picture remains clear without excessive edge enhancement. With regular broadcast TV or lower-quality YouTube material this can provide a noticeable improvement, although viewers watching even older material, e.g. from VHS tapes, may notice a slight cropping of the image on the left side (overscan).

It's a bit different when improving more highly compressed footage by reducing noise and artefacts such as posterization. The "Noise reduction" function can improve poor material, but fairly quickly it begins to alter the picture and remove fine details and grain. Therefore it's best to use it sparingly and mainly when the source truly requires it.

The RM7L features a 144 Hz VA panel, so from the outset it is well suited to sports, gaming and other fast-paced content. The high refresh rate also gives the motion interpolation more scope, allowing it to generate additional frames. On the RM7L it works well and, with the right settings, can noticeably improve motion smoothness without an excessive soap opera effect.

The Frame Pro comes with a 144 Hz panel, and when connected to a PC it also supports 240 Hz at Full HD resolution. That feature is primarily aimed at PC gamers, but the TV also performs very well at the standard 120 Hz refresh rate used for watching sport or gaming on consoles. A key advantage is the low level of motion blur. For a VA panel, The Frame Pro does very well in this respect. You don't see the strong, dark trailing smears behind moving objects that we often encounter on TVs with this type of panel. As a result, fast-paced sport and dynamic games remain clear in motion. Of course there's also motion smoothing with adjustable smoothness, so for films and sports broadcasts we can tailor the motion character to our preferences. You'll find our recommended settings in the photo.

The RM7L earns almost nothing but praise when it comes to features for gamers. The TV supports ALLM, VRR and Dolby Vision Gaming and works properly with HGiG, so it’s hard to point to any major omissions in that regard. In practice this means automatic switching to a low-latency mode, smoother motion at variable frame rates and accurate brightness reproduction in HDR games. There’s also a very useful Game Bar. From it you can quickly check frame rate, VRR status, signal format or aspect ratio, and change the key settings without leaving the game. TCL has also added a few extra options, such as a crosshair overlay and brightening of dark image areas, which can be handy in some titles. The biggest drawback stems from the use of the Pentonic 700 processor. Only two of the four HDMI ports support the full HDMI 2.1 standard. That won’t matter much with a single console, but if you connect two consoles and a PC you may run out of ports, especially since one of those ports may be needed for eARC and a soundbar.

Functionally for gamers The Frame Pro has a great deal to offer. The TV supports 4K at 120 Hz, VRR, ALLM and a properly implemented HGiG. When connected to a PC you can also use 144 Hz at 4K, and even 240 Hz when dropping to Full HD. Samsung also includes its standard suite of gaming extras. There is an expanded Game Bar that lets you quickly view and change the most important settings, and Game Motion Plus, which can improve the smoothness of games running at 30 or 60 frames per second. On top of that there is the Gaming Hub and the option to play in the cloud without needing to connect a console. The only real omission is Dolby Vision Gaming, which Samsung does not support. Apart from that, The Frame Pro offers virtually everything you can expect from a well-equipped gaming TV today.