TCL P7K / P79K vs PHILPS PUS9060

When turning to the assessment of HDR performance, we must be clear and without marketing embellishments: the P7K/P79K is not, and was never intended to be, a master in this field. The maximum peak brightness that this panel can generate hovers around a mere 300 nits. This represents a threshold, a kind of thin red line between what can be considered a barely satisfactory HDR signal and what is, in fact, not much different from standard dynamic range (SDR), unfortunately leaning towards the latter. Synthetic tests found brutal confirmation in reality – our measurements taken during movie screenings showed that luminance in key bright portions of the scenes rarely exceeded the ceiling of 200-250 nits. Thus, this is not a television that would allow content realised in a wide tonal range to spread its wings, and this must be openly admitted.

Unfortunately, the issue of colour reproduction is presented with equal restraint. Although the manufacturer positions this model within the "QLED" family, thanks to the use of a PFS LED filter, the results do not match the heightened expectations. The coverage of the wide DCI-P3 colour gamut reaches only 86%. In the context of the market, this is at best an average result, as most devices that employ additional layers to expand the colour spectrum easily achieve values at a minimum level of 90-92%.

The One is bright enough to enjoy films recorded in HDR format. The average brightness of this model is around 500 nits, so we can easily expect a pleasant viewing experience for films from streaming platforms. Of course – it could always be better, because when it comes to brightness, you can never have too much for this type of content. Unfortunately, a disappointing surprise may be the coverage of the DCI-P3 colour palette offered by the PUS9060. Although the manufacturer boasts about using a QLED filter here (in reality, it’s PFS LED), it's hard to speak of any positive effects from its operation. 85% coverage of the DCI-P3 palette is certainly not a level to be proud of in 2025 – particularly in a television advertised as QLED.

Every accurate assessment of image quality must begin with selection of the most optimal factory mode. In the case of the tested model P7K/P79K, the choice was made without hesitation for the "Film" mode. It is this mode that presents an image closest to the intentions of the creators, avoiding both the exaggerated brightness of the dynamic mode and the excessive dimming known from eco settings. And it must be admitted that, for a device in this price range, the factory calibration is surprisingly decent, although it has not escaped a few missteps. The most noticeable flaw turned out to be the not completely correctly set white balance. A slight dominance of the blue component gives the image a subtly cool, cold character, thus deviating from the exemplary neutrality that the director wanted to show us. The television performs much better in reproducing the greyscale in the standard dynamic range – the gamma curve is nearly exemplary. The only minor reservation could be made regarding the darkest parts of the image, where a slight deviation from the norm causes a loss of some detail in the shadows. The most serious challenge for the TCL software, however, was interpreting the HDR signal, as illustrated by the course of the EOTF curve. The television follows its own, quite free path here – the darkest details are disproportionately brightened, after which there is a noticeable slowdown in the increase of brightness for midtones. Fortunately, most of these imperfections are software-related issues that can be eliminated. With this thought in mind, we began the process of professional calibration.

We tested the PUS9060 in the best factory mode available – of course, we are referring to the movie mode. Unfortunately, the best in this case does not mean good. The image in this mode was distinctly yellowish and shifted towards orange tones. The white balance on this television was definitely too warm, giving the entire scene an artificial, somewhat “tanned” appearance. This led to significant colour errors, which in the worst cases exceeded a delta E value of 6 – thus they were visible to the naked eye. The situation was reversed in HDR mode, where the image became too blue and too cool in perception. Additionally, there was a slight increase in brightness – the gamma curve and EOTF suggested that the television slightly brightened the image, which was also evident in the comparative photo below.

The calibration process turned out to be spot on, particularly in the context of standard dynamic range (SDR) content. We successfully mitigated the television's tendency to emphasize cool tones, restoring the whiteness to its natural neutrality. Moreover, precise adjustments allowed us to correct a slight error in the gamma curve, ensuring that the darkest parts of the image regained their proper depth, without any trace of unnatural brightness. The effects are measurable and impressive – in the ColorChecker test, the overwhelming majority of colour reproduction errors fell below the perceptual threshold, achieving a deltaE value of under 2. This is a result that pricier models would not be ashamed of. Unfortunately, when it comes to HDR content, we encounter a barrier in the form of the inherent limitations of the panel itself. And although we managed to bring the colours into line, the software's characteristics mean that the television still adapts brightness in its own way, as evidenced by the persistent, non-standard EOTF curve. In summary, calibration adds immense value, but one must be aware that it cannot overcome certain physical barriers. The slightly elevated black level, due to the lack of local dimming, along with limited peak brightness, means that HDR content may not always be able to showcase its full potential. This is simply not the primary task of this display; its true strength, especially after professional tuning, lies in the viewing of SDR material.

Thanks to calibration in film mode, we managed to completely eliminate the yellow-orange tint, which significantly improved the perception of the entire scene. The image has become much more visually pleasing, although it is still far from reference settings. It may now appear slightly bluish, but it is still a definite improvement compared to the factory settings.

Unfortunately, we were not able to significantly improve the brightness characteristics, but this is already a matter of the television's design - the absence of local dimming limits the ability to precisely manage brightness. The PUS9060 simply cannot dynamically adjust luminance as more advanced models do. Nevertheless, after calibration, the overall experience is much more enjoyable, especially with film material.

After a series of harsh evaluations, fortunately, the time comes for praise, and this is due to the TCL AiPQ image processor for its work in the field of digital processing and content scaling. It should be noted right away that we are not talking about the level known from flagship designs; however, in the price segment represented by the P7K/P79K, the results achieved are more than solid. The feature for smoothing tonal transitions performs particularly well, effectively eliminating posterisation, which are the characteristic bands often visible in highly compressed materials, for example, from the ChooseTV service. The algorithm adeptly removes unwanted gradients, which ultimately looks really good. The television also handles upscaling competently, which is the task of elevating low-resolution materials to 4K standard. The resulting image, although it may initially seem a bit too sharp, fortunately, is not a problem. The software allows for free adjustment of this parameter using a sharpness slider, making it easy to customise the final appearance to personal preferences.

In the PUS9060, we find yet another version of the image processor called by Philips the P5 Perfect Picture, which is designed to improve the image – especially the imperfect one. The television features a distortion reduction function, which serves to smooth tonal transitions, i.e., those "colour joins" we mentioned earlier. This function does this very effectively – there is no noticeable harsh gradation of colours, but unfortunately, it works so aggressively that it sometimes dulls desired elements, such as the textures of materials or film grain. So one can consider this a certain compromise. We would rather not recommend using this function for films, but for more casual content – e.g., YouTube or standard television – it is perfectly fine.

The P5 processor also aims to improve the quality of lower-resolution images and does so quite effectively. The test image with the model is very soft – sometimes overly so – but this can be easily adjusted with the sharpness slider to match personal preferences. It is also pleasing that the television does not cut off edges in SD materials – which unfortunately still occurs in some TV models.

The issue of fluidity and sharpness of the image in motion is inextricably linked to a fundamental parameter of the matrix, and in the case of the TCL P7K/P79K, we are dealing with a panel with a native refresh rate of 60 Hz. This specification defines its capabilities from the outset and makes it difficult to unequivocally recommend it to enthusiasts of dynamic sports broadcasts. During fast camera movements, the image loses sharpness, and the panel also shows a slight tendency to smearing, which may be noticeable to more sensitive viewers. Fortunately, not everything in this aspect has been left to chance. The manufacturer has implemented a simple motion smoothing system, which is primarily used in film material recorded at 24 or 30 frames per second. Thanks to a dedicated slider, users can decide for themselves the final character of the motion – from maintaining a fully cinematic, slightly juddery image to achieving a very smooth, almost theatrical effect. It is a simple but effective tool that allows users to tailor the viewing experience to their own preferences.

PHILIPS PUS9060 is equipped with a 4K panel with a refresh rate of 144 Hz, so we can confidently say that it is suitable for both watching sports and playing games. And indeed, it is. But what about films that are most often recorded at 24 frames? As with most of the televisions we tested with a refresh rate of 120 Hz and above, the PUS9060 offers two sliders in the motion smoothness options. The “Smoothness” slider allows you to adjust the effect in films – you can set the image to be smoother, resembling a theatrical effect (higher settings), or more cinematic, with a slight "jump" in frame rate (lower settings). Additionally, there is a function called "Motion Blur Reduction," which limits blurring – and this is a very useful feature, especially when watching sports.

Although on paper the native 4K@60Hz panel might suggest that the TCL P7K/P79K is not a television tailored for gamers, the reality is surprisingly different. On the contrary, the manufacturer has ensured a rich package of features that make it a very friendly companion for next-generation consoles. Onboard, we find key technologies such as ALLM, which provides automatic switching to low latency mode, and VRR, or variable refresh rate, which eliminates screen tearing. The list is complemented by support for Dolby Vision Gaming and a simple yet functional Game Bar. However, the real and extremely pleasant surprise is something else. It turns out that the television easily supports a high refresh rate signal of 120 Hz but at lower resolutions – 1080p and 1440p. This is fantastic news for console owners, who know well how rarely games run in native 4K at a full 120 frames per second. The ability to choose between higher resolution and doubled smoothness is therefore an extremely sensible compromise.

In summary, although the P7K/P79K may not be the target screen for the most passionate tournament players, for the casual or occasional console user, it offers a package of options that is hard to find among many competitors at this price.

PHILIPS PUS9060 is a true gaming monster – it has practically everything you could expect from a modern gaming television. There's VRR, there's ALLM, and on top of that, there's the implementation of HGiG, which helps to set HDR in games the way the developers intended. The television supports every possible resolution at 120 Hz, including 1080p, 1440p, and full 4K – so regardless of whether you're gaming on Xbox, PS5, or PC, everything works as it should. It also features a simple Game Bar, which is a special menu for gamers that allows you to quickly check if the ALLM mode is indeed working in low-latency mode.

And of course – Ambilight TV. Let’s be honest – without LED lights at the back, it’s not really a proper gaming setup. 😉 The multicoloured backlighting can really enhance the atmosphere, especially in the evening. It may not be to everyone's taste, but younger gamers will be thrilled – because it just looks impressive.