TCL C9K vs Philips PUS7000

As we mentioned with black and contrast – the C9K makes a huge impression in synthetic tests. Our measurements showed that on a screen 10% filled with white, the television is capable of squeezing out... 4000 nits of brightness! It sounds cosmic, but – and here unfortunately the pattern repeats – the numbers say one thing, and practice another. In real film scenes, the situation looks different. In the best case, when the light effects occupy a large part of the image and the local dimming algorithm doesn't have to think too hard about what to do with thousands of zones – the result is really quite good. At that point, the C9K can reach about 1500 nits, which provides a pleasant, intense flash and can indeed make a positive impression.

The problem begins with smaller elements – such as stars in the sky, the moon, or individual reflections. That's when the proverbial cat comes out of the bag: the algorithms are not yet refined, and brightness drops even to 400–500 nits. This is a huge difference compared to the potential of 4000 nits that we saw in laboratory tests. Why does this happen? Most likely, the television tries to protect the black and minimise the halo effect around bright objects. Unfortunately, this comes at the cost of details – some of the intricate details simply disappear, and the scene loses its nature.

Unfortunately, the PUS7000 is not suitable for watching HDR content. The screen is simply too dark. A brightness level of 200 nits is insufficient to properly display such a format. Even if a HDR signal message appears on the screen, the image will resemble a standard SDR recording. Therefore, it is better to stick with the latter format to avoid errors in displaying bright scenes, as discussed below. The situation is not improved by the fact that this is a classic LCD model without additional layers enhancing colours, such as QLED or PFS. As a result, colours in HDR may appear washed out. Ultimately, this gives a worse effect than in the standard SDR format, which is simply better suited to the capabilities of this panel.

For colour tests, we once again reached for the Filmmaker mode – a new feature in TCL televisions for 2025. And although the direction itself is a step in the right direction, the execution leaves much to be desired. The white balance in SDR content turned out to be too warm – there was an excess of red. Conversely, in HDR, it swung in the opposite direction: the image became excessively blue. The Colour Checker test revealed quite a few colour inaccuracies that were noticeable to the naked eye. An even bigger problem turned out to be what we mentioned above – managing brightness. Regardless of whether we were watching SDR or HDR content, the image had a tendency to blow out the entire scene, giving it an unnatural, almost grotesque character. Therefore, it is hard to call this a 'director’s mode' – because the director surely has never seen such an image.

We tested the television in movie mode, which theoretically should provide the best and most natural colours. And indeed, this mode is quite correct; however, after connecting the calibration equipment, its biggest flaw came to light. The PUS7000 has significant shortcomings in displaying red. Poorly tuned white balance and overly low saturation of this colour cause the image to appear too cool. As a result, one may get the impression that the displayed content is simply lacking in vibrant colours. The situation is worsened by the fact that both SDR and HDR content are excessively brightened. This is confirmed by the gamma curve and EOTF graphs, which show that the television displays the image brighter than it should. This causes scenes to lose their depth and may appear somewhat washed out. Fortunately, in the Philips menu, we find quite a few functions to improve these aspects, so we immediately proceeded to calibration to see what could be squeezed out of this screen.

After calibration, we finally managed to tame the white balance – and it immediately translated into a more natural image. Colours finally started to look as they should, and the overall presentation was incomparably better than with the factory settings. In other words – it’s worth taking a moment to improve this, as the gain is really significant. The gamma responsible for managing brightness was also brought under control in SDR content, and the effect was more than satisfactory. Unfortunately, when we switched on the HDR material, the situation quickly became complicated. No matter how we set the local dimming, the television had a tendency to do what it pleased with the image – either overexposing the whole picture or dimming the darkest parts too much. Just like we saw in the scene from the film Billy Lynn. Colour-wise, the improvement after calibration makes a great impression, but managing brightness in HDR remains the Achilles' heel of the C9K and constitutes a technological limitation.

After professional calibration, it is evident that the PUS7000 responds well to image adjustments. In this price range, this is not at all a given. The effects should be evaluated in two scenarios, depending on what content we plan to watch. SDR performs the best. After our adjustments, the picture looks really good. Most colour errors have fallen below level 3, which is the threshold at which distortions usually begin to be visible to the naked eye in measurements. Films, series, sports, and regular television look natural, without unpleasant deviations. If someone mainly watches classic channels or streams in HD quality, the difference after calibration will be noticeable immediately. However, it must be clearly stated that the PUS7000 is still not a television suited for reasonable HDR, and calibration changes very little in this regard. The reason lies in the hardware: the colours remain too unsaturated. The television lacks solutions to expand the colour gamut, such as PFS filters or a quantum dot layer, so the panel simply cannot display the intense colours required by HDR. This is most apparent in reds, which still look pale. This limitation cannot be bypassed with menu settings, as it stems from the design of the backlighting and the panel itself.

The digital image processing in TCL C9K is rather mediocre. The tone transition smoothing feature is supposedly present, but activating it hardly makes any difference – colour banding is still visible, and it can inadvertently highlight elements we would prefer to hide, such as textures of objects. Fortunately, it does not remove film grain, but that's scant consolation considering the effects are still poor. Thus, it's hard to recommend using this option.

On the other hand, image scaling performs significantly better. Lower quality materials look quite decent – characters and backgrounds are represented clearly, although of course, with sources like 576p, the limitations of the physics cannot be disguised. Sometimes, there's characteristic aliasing of objects, but that's due to the source itself, not the algorithm. A plus for the fact that there are no overscan issues – the image is neither artificially cropped nor enlarged.

The PUS7000 handles digital image processing quite well. The distortion reduction feature deserves praise, as it effectively smooths out unwanted tonal transitions even at low settings. However, it has a drawback: if applied too aggressively, it can introduce undesirable artifacts on the screen. Therefore, it would be a good idea to experiment with this setting to find a happy medium between a smooth image and detail clarity.

The upscaling, or enhancing the quality of lower-resolution materials to 4K, is adequate. The image after processing is very "soft," which is typical for nearly all Philips televisions. The edges are plastic and smooth, making the image look cohesive. If it feels too soft for someone, the sharpness slider in the menu can always be adjusted to achieve a more pronounced effect.

Similar to the C8K, the C9K is also a really fast television – both figuratively and literally. On board, we have a 4K panel with a refresh rate of 144 Hz, and at lower resolutions, the panel can even ramp up to 288 Hz. Such speed translates into practice – while watching sports or playing games, the picture looks very smooth and clear. Additionally, in films, we get an extra motion smoothing feature called Motion Clarity, which allows you to adjust the smoothness to your own preferences – from the cinematic "stuttering" of frames to nearly theatrical smoothness.

In this respect, we actually have no good news. It might seem that the biggest downside is the lack of a 120 Hz panel, but in this price range, that is actually the norm, and it is hard to expect anything more. However, the worst part is that the television does not have any features to improve motion smoothness. There is a lack of any supporting systems, both in films and in sports. We must come to terms with the fact that the image on the PUS7000 is processed "raw". This means that during dynamic scenes or fast camera movements, the motion can appear choppy or unclear. We do not have the option to enable any smoothers that would reduce this effect.

For gaming, the TCL C9K is a complete tool. Here we have two (out of four) HDMI 2.1 ports with full bandwidth of 48 Gbps, so all the key technologies work: VRR (Variable Refresh Rate) and ALLM (Auto Low Latency Mode). Additionally, the manufacturer has included a really intuitive Game Bar, which allows you to quickly check the most important parameters and adjust settings without rummaging through the menu. Also worth noting is TCL's policy – the television does not shy away from any HDR formats, even in game mode. Whether it's HGiG or Dolby Vision for the Xbox Series S/X console – everything works as it should, giving the player a wide range of freedom.

Although the PUS7000 is not marketed as a gaming television, it does not perform as poorly in this category as one might expect. While it is true that we won’t find support for 120 Hz refresh rates, which is understandable at this price point, the manufacturer has ensured several important features that genuinely enhance the gaming experience on consoles. The most important of these are the VRR and ALLM technologies. VRR is responsible for synchronising the screen with the number of frames generated by the console. This prevents the image from tearing and keeps it consistent even during sudden drops in frame rate while gaming. In contrast, ALLM is a solution that automatically switches the television to the lowest latency mode as soon as it detects a signal from the console. All these parameters are easily accessible thanks to the Game Bar feature. This is a special control panel for gamers that can be summoned on screen at any time. It allows for a quick preview of the current settings and connection status without interrupting gameplay, which is a very convenient solution.