TCL C8L / QM8L vs SONY Bravia 9 II XR95M2

In terms of HDR, the TCL C8L turns out to be a hellishly bright television – quite literally. On a synthetic test pattern sized at 5%, our measurement equipment indicated a result exceeding 4500 nits. This is a truly astronomical result, considering that reference monitors used by directors, which we often refer to in our materials, typically operate around 4000 nits. Does this mean that the C8L breaks barriers and climbs to the technological peak of Mini-LED? Not quite. Dry synthetic tests are one thing, while real cinematic images are another. In real, varied scenes, the C8L peaks at around 1600 nits. This is still a very good result, ensuring a very high level of HDR dynamics, but it is also clearly lower than what the manufacturer boasts in the specifications. The problems begin with very small bursts of light – at that point, brightness can drastically drop to around 600 nits. The algorithm tries at all costs to maintain deep blacks and minimise the halo effect, but this comes at the expense of HDR impact. This is perfect evidence that laboratory test patterns rarely align with what we ultimately see on the screen.

However, huge praise is due for colour reproduction, thanks to the new generation of SQD (Super Quantum Dot) quantum dots. The DCI-P3 colour gamut coverage reaches 97%, but the truly jaw-dropping measurements come from the extremely demanding BT.2020 space. The C8L achieves an impressive 90% in this space, placing it alongside today's top screens equipped with RGB backlighting. Importantly, unlike some screens with Micro/Mini RGB backlighting, this effect is stable regardless of the scene displayed. Of course, it’s worth remembering that content mastered for such a wide gamut in films or series is still rare. However, the very fact that the panel has such a "colour reserve" deserves tremendous admiration.

The real showcase of the new backlight architecture and Sony’s processor is HDR material reproduction. At the official launch Sony engineers said (not officially 😉) that the brightness of the Bravia 9 II should be almost identical to their professional director’s monitor BVM-HX3110, which is priced at astronomical sums. Our lab tests confirmed those were not empty promises. During synthetic measurements on the L20 test pattern the TV effortlessly exceeded the 4000 nits peak brightness barrier. Most importantly, these spectacular results translate directly to real film scenes. In most of the demanding shots we tested the screen easily maintained brightness around 2500–3000 nits. Regardless of the scene’s character, whether the light was small and pinpoint or flooded almost across the entire screen, the HDR effect was incredibly intense.

Colours

Colours are another key pillar of RGB Mini LED technology (Sony’s True RGB implementation). Specifically for testing these kinds of displays we have permanently introduced a new research section to examine how TVs handle colours in real-world conditions. Traditional tests using synthetic patterns are no longer enough to determine actual colour-gamut coverage. From now on we also measure colour saturation directly in selected film scenes by overlaying measurement points on them. So how do the colours perform?

In synthetic tests the Bravia 9 II achieves excellent results. For the popular DCI-P3 space used for HDR content the colour gamut coverage reached almost 98%, while for the extremely wide and demanding BT.2020 space measurements indicated nearly 90%. However, in real, varied scenes those values fall by a few percentage points. This is a direct result of the nature of zoned RGB backlighting. When differently coloured elements or bright white highlights appear side by side, light from adjacent zones starts to bleed together, producing a slight whitish glow. That naturally affects colour saturation, reducing it slightly. It shows that despite Sony’s brilliant algorithm for controlling the RGB LEDs, the number of zones is still too small to eliminate this effect entirely.

Is that something to complain about? Of course not. The Bravia 9 II’s final colour coverage is ultimately the same as that of a very good QLED TV, and the most important point is this: the vast majority of HDR films and series are distributed in the DCI-P3 colour space. In that standard Sony easily maintains very high colour saturation, regardless of the scene.

We tested the TCL C8L in the best factory mode available in the TV’s menu for image fidelity. That’s of course Filmmaker Mode, which only arrived in this brand’s software relatively recently (a year ago in the "K" series). It allows the average user to achieve quite decent colour reproduction straight out of the box, though it is certainly not perfectly tuned. Looking at the unit’s out-of-the-box white balance — in both SDR and HDR material — the red component was clearly lacking, which made the image noticeably cooler and slightly shift towards blue‑green tints. The issue of brightness management also looks ambiguous, as we mentioned earlier. While the gamma linearity in SDR content is really good and stays steadily at the reference value of 2.4, the situation in HDR is much worse. Tracking the EOTF curve clearly shows the TV has a noticeably boosted brightness across the entire range, so the final image can be excessively bright and inconsistent with the creators’ intent, and this is in a mode that by definition should avoid that. Of course, as with every sample in our lab, we subjected this one to professional calibration, and you can find the results below.

Contrary to appearances and high expectations, the Bravia 9 II we tested showed some issues with its factory calibration straight out of the box. Looking at the white balance charts, it’s clear it wasn’t perfect. In SDR content the red component was noticeably lacking, so the image leaned toward cooler, bluish tones. In HDR, however, the white balance in that respect was considerably better. So where do the visible errors in image reproduction come from? They result from unexpected tuning of the gamma and the EOTF curve. In both cases the Bravia 9 II straight from the factory showed a marked deviation from reference standards. In SDR material the gamma was significantly too high — at extremes it hovered very close to 2.8 instead of the target 2.4. In practice this meant the image looked artificially darkened and seemed washed of colour, with details in darker areas (the shadows) disappearing entirely. The opposite happened with HDR material, where brightness reproduction is governed by the EOTF. That curve was pushed too high above the correct value, causing the image to be artificially brightened across most luminance ranges. As with every TV we test, we subjected this unit to professional calibration. You can see the results and how we managed to correct these factory errors below.

As you can see, the results of a professional calibration of the TCL C8L are truly promising, thanks to the comprehensive calibration controls the manufacturer has provided in the menu. Above all, we managed to fully correct the white balance, eliminating the red deficiency, so the image finally stopped drifting into unwanted cool tones. After that adjustment, the errors in the ColorChecker test fell to near-reference values, consistently sitting below a Delta E threshold of 2, i.e. below the visibility threshold for the human eye.

If test patterns look so perfect, you may ask us why the final score in this category is lower. The answer lies in the brightness management described earlier. Although the menu includes sliders that let you precisely straighten the EOTF curve on synthetic signals, when faced with real film material (I recommend enabling the EOTF filter when watching films), it becomes clear that the TV, in most scenarios, still responds to HDR metadata in its own way. As a result, the picture can be slightly over-bright and not faithful to the filmmakers' intent, and it is precisely for this lack of consistency with real films that we had to take a few points off the C8L's score.

Fortunately, with professional calibration, most of the Bravia 9 II’s factory missteps can be effectively eliminated. We managed to precisely correct, above all, the white balance and the gamma curve and EOTF. After these procedures, in everyday use and during film viewings the television looks worlds better. The picture gained proper depth and modelling, the cool tint to whites disappeared, and shadow detail that previously vanished because of an overly high gamma finally became perfectly visible. Although we ultimately rate colour accuracy as very good, as specialists we must point out one fairly serious design flaw in this model. The Bravia 9 II could look even better if it were not for the complete lack of an advanced colour management system in the television’s menu.

While a basic white balance correction can be carried out here without difficulty, the settings lack options for adjusting specific colours. We tried to tackle this issue in every possible way, both with the traditional method from the remote and via dedicated calibration software for Bravia televisions. Unfortunately, that function has been completely locked. We suspect this may stem from the specifics of the new RGB architecture, which imposes its own limitations. It’s a great shame, because without it you cannot push colour reproduction to perfection. A skewed red still catches the eye. One can only hope that Sony will fix this shortcoming in time via an update.

This year the C8 series and the higher-end models have probably received the biggest and most eagerly awaited upgrade in TCL’s history, and it concerns digital picture processing. The C8L is the entry-level model in the manufacturer's line-up that has been equipped with the latest flagship chip MediaTek Pentonic 800 (listed in the menu as MT9655). It is thanks to its computing power that the feature called "Gradual Smoothing" finally works as it should. The algorithm effectively removes unwanted posterization (ugly tonal transitions / colour banding) from the image, doing so intelligently enough that it does not degrade the sharpness of other details.

The processor also handles upscaling lower-resolution content to 4K very well. Although assessing this element can be largely academic, because the differences between today’s TVs in this class are very subtle. The most important takeaway is that TCL finally has nothing to be ashamed of compared with the competition.

Digital processing and upscaling have long been Sony’s hallmark, and after testing the Bravia 9 II we can confidently say that nothing has changed in that respect. Sony remains at the forefront of the market. Their proprietary XR image processor, which in this model works alongside the main MediaTek Pentonic 1000 chip, deserves the highest praise. That combination delivers excellent results. The upscaling of lower-resolution material itself is extremely effective and precise. However, what most deserves applause in the XR processor’s operation is its tonal transition smoothing function. The system can reduce posterization in heavily compressed material to virtually zero. Crucially, the algorithm does this in a very intelligent way. It removes only the annoying digital “steps” in gradients without blurring fine texture details or creating an artificial, “plastic” look stripped of film grain. The picture remains sharp, natural and cinematic.

The TCL C8L is equipped with a fast panel with a native refresh rate of 144 Hz. This specification will be most appreciated by demanding PC gamers, while most users, who rely on consoles or TV broadcasts, will make use of a stable 120 Hz. It is at 120 Hz that the motion-processing algorithms take care of image processing (in films, series and sports). In the TV menu you'll find a "Motion Clarity" tab that allows you to tailor the motion smoothing to your own preferences. The algorithms cope well with both cinematic productions at 24 or 30 frames per second and with fast-paced sports broadcasts at 50 or 60 frames per second, ensuring appropriate smoothness.

In the Sony Bravia 9 II specification you won't find very high screen refresh rates above 120 Hz, which some more demanding PC gamers may regard as a drawback. However, in everyday use, whether during movie viewing, console gaming or watching sport, it's really hard to have any complaints about motion smoothness. The VA-type panel used here does show slight smearing, natural for this panel type, but the excellent Motionflow motion smoothing algorithms come to the rescue. In the system menu you'll find sliders for blur reduction and smoothing that let you precisely tailor the motion characteristics to your own preferences.

For gamers – and especially for owners of powerful PCs and several consoles simultaneously – the TCL C8L is a true monster. It is the first model in this manufacturer's lineup to feature as many as four full HDMI 2.1 ports with a maximum bandwidth of 48 Gbps. This is directly attributable to the use of the new Pentonic 800 processor, which we discussed earlier. Additionally, the television seamlessly supports practically every gaming feature. We have an automatic game mode (ALLM) that reduces latency to minimal levels, and full frame synchronization (VRR) operating in an impressive range of up to 288 Hz. There's also talk of standards such as G-Sync or FreeSync from Nvidia and AMD. When it comes to display standards, there are no compromises either: the C8L offers complete support for HDR formats in games, including gaming Dolby Vision and the HGiG profile. We can conveniently manage all of these features from a very readable player bar (Game Bar), which we can personalise to our own preferences. From a purely gaming perspective, there's really nothing to fault the C8L on – well, maybe aside from the previously mentioned slight blurring. But other than that? It's a no-nonsense machine for gamers.

Aside from a fairly serious design misstep in limiting the platform to just two full HDMI 2.1 ports, the Bravia 9 II offers almost all the key gaming features available on the market. Sony has already accustomed us to such a rich feature set in its previous models. The list of supported technologies is extensive. It includes automatic low-latency mode (ALLM), variable refresh rate (VRR), and a fully correct implementation of the HGIG standard and the Dolby Vision format tailored for gamers.